The effect of matrix extension on fiber stresses and matrix debonding in a hybrid composite monolayer

被引:0
|
作者
Shishehsaz, M [1 ]
机构
[1] Shahid Chamran Univ, Dept Mech Engn, Ahvaz, Iran
来源
关键词
hybrid lamina; maximum shear stress; Dugdale plastic zone; strew concentration; extensional stiffness;
D O I
暂无
中图分类号
O [数理科学和化学]; P [天文学、地球科学]; Q [生物科学]; N [自然科学总论];
学科分类号
07 ; 0710 ; 09 ;
摘要
The effect of matrix extension on stress concentrations as well as shear stress distribution between fiber and matrix interface is examined in a hybrid composite lamina of finite width subjected to internal cracks. To formulate the problem, a plastic zone of Dugdale type is considered at the crack tips. The results show that in composites with low extensional stiffness, although shear-lag model appears to be excellent in predicting normal stress concentrations in intact filaments, its results on peak shear stresses in the matrix bays remain questionable. According to the results, in a lamina with a weak matrix in extension (epsilon =0.0064), based on, psi =0.25, shear-lag model predicts peak shear stresses to be 58% and 28% below their actual values at r=3 (2a/w =0.1), and r=7 (2a/w =0.3), respectively. It is also, observed that with an increase in matrix extensional stiffness, the values of normal stress concentrations in both HM and LM fibers are reduced by 18% and 16% respectively, for a crack to width ratio of 0.3, epsilon =0.0875,and psi =0.25.
引用
下载
收藏
页码:253 / 264
页数:12
相关论文
共 50 条
  • [41] FIBER DEBONDING IN RESIDUALLY STRESSED BRITTLE MATRIX COMPOSITES
    CHARALAMBIDES, PG
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1990, 73 (06) : 1674 - 1680
  • [42] Finite difference solution of steady state creep deformations in a short fiber composite in presence of fiber/matrix debonding
    Ghavami, A.
    Abedian, A.
    Mondali, M.
    MATERIALS & DESIGN, 2010, 31 (05) : 2616 - 2624
  • [43] A mechanical model for fiber reinforced composite materials with elasto-plastic matrix and interface debonding
    Brighenti, R
    COMPUTATIONAL MATERIALS SCIENCE, 2004, 29 (04) : 475 - 493
  • [44] Quantifying Localized Stresses in the Matrix of a Fiber-Reinforced Composite via Mechanophores
    Haque, Nazmul
    Gohl, Jared
    Chang, Chia-Chih
    Chang, Hao Chun
    Davis, Chelsea S.
    MACROMOLECULAR CHEMISTRY AND PHYSICS, 2023, 224 (24)
  • [45] Residual stresses in shape memory alloy fiber reinforced aluminium matrix composite
    Loong, Tang Tsz
    Jamian, Saifulnizan
    Ismai, Al Emran
    Nur, Nik Hisyammudin Muhd
    Watanabe, Yoshimi
    COLLOQUIUM OF ADVANCED MECHANICS (CAMS2016), 2017, 165
  • [46] Debonding Behavior Characterization of Fiber Matrix Interface using a Cruciform Model Composite with Multiple Fibers
    Kobayashi, Shota
    Nakatani, Hayato
    Ogihara, Shinji
    DESIGN, MANUFACTURING AND APPLICATIONS OF COMPOSITES, 2013, : 15 - 22
  • [47] MATRIX CRACKING AND INTERFACE DEBONDING IN FIBER-REINFORCED CEMENT-MATRIX COMPOSITES
    SHAO, YX
    LI, ZJ
    SHAH, SP
    ADVANCED CEMENT BASED MATERIALS, 1993, 1 (02): : 55 - 66
  • [48] Local field effects in titanium matrix composites subject to fiber-matrix debonding
    Bednarcyk, BA
    Arnold, SM
    Aboudi, J
    Pindera, MJ
    INTERNATIONAL JOURNAL OF PLASTICITY, 2004, 20 (8-9) : 1707 - 1737
  • [49] Simulation of debonding on the interface and subsequent creep crack growth in the matrix for metal matrix composite
    Mizuno, M
    Tanaka, K
    Inoue, T
    MATERIALS SCIENCE RESEARCH INTERNATIONAL, 1995, 1 (01): : 17 - 22
  • [50] Three-dimensional, multiscale homogenization for hybrid woven composites with fiber-matrix debonding
    Heide-Jorgensen, Simon
    Budzik, Michal K.
    Ibsen, Claus H.
    COMPOSITES SCIENCE AND TECHNOLOGY, 2022, 218