Simultaneous chromizing-aluminizing diffusion coating of austenitic stainless steel by a two-step CVD process

被引：13

作者：

Park, HH

Lee, KT

Shin, HS ^{[1
]}

机构：

[1] Chonbuk Natl Univ, Sch Chem Engn, Chonju 561756, South Korea

[2] Chonbuk Natl Univ, Dept Engn Met, Chonju 561756, South Korea

来源：

OXIDATION OF METALS | 1998年 / 50卷 / 5-6期

关键词：

pack-cementation process; master alloy; two-step diffusion coating; austenite stabilization;

D O I：

10.1023/A:1018800723939

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Chromium and aluminum were simultaneously deposited by diffusion into austenitic stainless steel substrates by the pack-cementation process. Diffusion was carried out in two different thermal runs (one- and two-step processes) and the results are presented. The effects of various pack chemistries on the coating characteristics of 310S and 316 stainless steel were also investigated. The major controlling factor to achieve the desired coatings was the composition of the masteralloy, particularly, the aluminum activity in the pack. A more uniform coating was achieved on 316 than on 310S for the same coating conditions due to the austenite-stabilization effect of Ni, which is less abundant in 316. The best coating condition in the range examined was with a pack composed of 80Cr-20Al masteralloy and 2wt.% NH4Cl activator by the two-step process.

引用

页码：377 / 387

页数：11

共 50 条

[31] SiC coating prepared by a two-step technique of pack cementation and CVD on carbon/carbon composites
Wang, Biao
Li, Ke-Zhi
Li, He-Jun
Fu, Qian-Gang
Wang, Xiang
Lan, Feng-Tao
Wuji Cailiao Xuebao/Journal of Inorganic Materials, 2007, 22 (04): : 737 - 741
[32] SiC coating prepared by a two-step technique of pack cementation and CVD on carbon/carbon composites
Wang Biao
Li Ke-Zhi
Li He-Jun
Fu Qian-Gang
Wang Xiang
Lan Feng-Tao
JOURNAL OF INORGANIC MATERIALS, 2007, 22 (04) : 737 - 741
[33] Microstructure and ablation properties of ZrC coating prepared by two-step technique of pack cementation and CVD
Wu, Min
Li, Guo-Dong
Xiong, Xiang
Yang, Gang-Yi
Fenmo Yejin Cailiao Kexue yu Gongcheng/Materials Science and Engineering of Powder Metallurgy, 2013, 18 (06): : 827 - 834
[34] Slurry aluminizing of IN-800HT austenitic stainless steel and pure nickel. Correlations between experimental results and modelling of diffusion
Pedraza, F.
Proy, M.
Boulesteix, C.
Krukovskyi, P.
Metel, M.
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2016, 67 (10): : 1059 - 1067
[35] Features of grain boundary character distributions in a austenitic stainless steel after cold rolling with low strain followed by single and two-step annealing
Fang Xiaoying
Guo Hong
Wang Weiguo
ADVANCED MATERIAL SCIENCE AND TECHNOLOGY, PTS 1 AND 2, 2011, 675-677 : 571 - 574
[36] A novel two-step silica-coating process for engineering magnetic nanocomposites
Liu, QX
Xu, ZH
Finch, JA
Egerton, R
CHEMISTRY OF MATERIALS, 1998, 10 (12) : 3936 - 3940
[37] Simultaneous Diffusion Coating of Cr and Si on Stainless Steel using Fluoride-Free Activator
Fujimura, Hiromu
Nishimoto, Akio
Akamatsu, Katsuya
JOURNAL OF THE JAPAN INSTITUTE OF METALS AND MATERIALS, 2013, 77 (08) : 334 - 338
[38] Aluminum Coating Influence on Nitride Layer Performance Deposited by MO-CVD in Fluidized Bed on Austenitic Stainless Steel Substrate
Galusca, D. G.
Perju, M. C.
Nejneru, C.
Burduhos-Nergis, D. D.
Lazarescu, I. E.
EUROINVENT ICIR 2018, 2018, 374
[39] Transient Liquid Phase Bonding of 17-4-PH Stainless Steel Using Conventional and Two-Step Heating Process
Moradi, Mohammad J.
Emadoddin, Esmaeil
Omidvar, Hamid
METALS AND MATERIALS INTERNATIONAL, 2021, 27 (12) : 5268 - 5277
[40] Transient Liquid Phase Bonding of 17-4-PH Stainless Steel Using Conventional and Two-Step Heating Process
Mohammad J. Moradi
Esmaeil Emadoddin
Hamid Omidvar
Metals and Materials International, 2021, 27 : 5268 - 5277

← 1 2 3 4 5 →