Electron Beam Additive Manufacturing of TiCx/Ti-6Al-4V Composite

被引：6
|
作者：
Builuk, Artem [1 ,2 ]
Kazachenok, Marina [1 ]
Martynov, Sergey [1 ]
机构：
[1] RAS, SB, Inst Strength Phys & Mat Sci, Tomsk 634055, Russia
[2] Natl Res Tomsk Polytech Univ, Tomsk 634050, Russia
来源：
PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS WITH HIERARCHICAL STRUCTURE FOR NEW TECHNOLOGIES AND RELIABLE STRUCTURES 2019 | 2019年 / 2167卷
关键词：
D O I：
10.1063/1.5131906
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this paper, the technology of simultaneous electron beam melting of the titanium alloy wire of Ti-6Al-4V and TiC powder was developed. The effect of 3D printing parameters on the microstructure and mechanical properties of TiCx/Ti-6Al-4V composites was also investigated. Simultaneous feeding of the Ti-6Al-4V wire and the TiCx/Ti-6Al-4V mechano-composite leads to a change in the microstructure of the 3D-printed samples. Such a change in the microstructure leads to a significant increase in the microhardness and mechanical characteristics under tension. The maximum ultimate tensile strength (950 MPa) and ductility (6%) are achieved with the introduction of the mechano-composite TiC15wt%/Ti-6Al-4V.
引用
收藏
页数：4
相关论文
共 50 条
  • [31] Thermofluid Properties of Ti-6Al-4V Melt Pool in Powder-Bed Electron Beam Additive Manufacturing
    Rahman, M. Shafiqur
    Schilling, Paul J.
    Herrington, Paul D.
    Chakravarty, Uttam K.
    [J]. JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 2019, 141 (04):
  • [32] Layer Additive Production or Manufacturing of Thick Sections of Ti-6Al-4V by Selective Electron Beam Melting (SEBM)
    Y. Y. Sun
    S. Gulizia
    D. Fraser
    C. H. Oh
    S. L. Lu
    M. Qian
    [J]. JOM, 2017, 69 : 1836 - 1843
  • [33] Phase-field simulation of microstructure evolution of Ti-6Al-4V in electron beam additive manufacturing process
    Sahoo, Seshadev
    Chou, Kevin
    [J]. ADDITIVE MANUFACTURING, 2016, 9 : 14 - 24
  • [34] Main Microstructural Characteristics of Ti-6Al-4V Components Produced via Electron Beam Additive Manufacturing (EBAM)
    Lopez-Castano, Silvia
    Emile, Philippe
    Archambeau, Claude
    Pettinari-Sturmel, Florence
    Douin, Joel
    [J]. TMS 2021 150TH ANNUAL MEETING & EXHIBITION SUPPLEMENTAL PROCEEDINGS, 2021, : 176 - 188
  • [35] Structural design and mechanical response of gradient porous Ti-6Al-4V fabricated by electron beam additive manufacturing
    Wu, Y. C.
    Kuo, C. N.
    Shie, M. Y.
    Su, Y. L.
    Wei, L. J.
    Chen, S. Y.
    Huang, J. C.
    [J]. MATERIALS & DESIGN, 2018, 158 : 256 - 265
  • [36] Scanning Speed Effect on Mechanical Properties of Ti-6Al-4V Alloy Processed by Electron Beam Additive Manufacturing
    Wang, Xiaoqing
    Gong, Xibing
    Chou, Kevin
    [J]. 43RD NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE, NAMRC 43, 2015, 1 : 287 - 295
  • [37] The joining of CP-vanadium and Ti-6Al-4V using the Electron Beam Melting Additive Manufacturing method
    Moosa, Affaan Uthman
    Hernandez-Nava, Everth
    Mejbel, Mohanad Kadhim
    Todd, Iain
    [J]. ADVANCES IN INDUSTRIAL AND MANUFACTURING ENGINEERING, 2022, 5
  • [38] Prediction of Microstructure Evolution for Additive Manufacturing of Ti-6Al-4V
    Yang, Xinyu
    Barrett, Richard A.
    Tong, Mingming
    Harrison, Noel M.
    Leen, Sean B.
    [J]. 23RD INTERNATIONAL CONFERENCE ON MATERIAL FORMING, 2020, 47 : 1178 - 1183
  • [39] Additive Manufacturing of Ti-6Al-4V alloy for Biomedical Applications
    Balasubramanian Gayathri Y.K.
    Kumar R.L.
    Ramalingam V.V.
    Priyadharshini G.S.
    Kumar K.S.
    Prabhu T.R.
    [J]. Journal of Bio- and Tribo-Corrosion, 2022, 8 (04)
  • [40] Comparison of virgin Ti-6Al-4V powders for additive manufacturing
    Sun, Yu
    Aindow, Mark
    Hebert, Rainer J.
    [J]. ADDITIVE MANUFACTURING, 2018, 21 : 544 - 555
12345