Design Considerations for High Performance Traction Machines: Aiming for the FreedomCar 2020 Targets

被引：0

作者：

Walker, Adam ^{[1
]}

Galea, Michael ^{[1
]}

Gerada, Chris ^{[1
]}

Mebarki, Abdeslam ^{[2
]}

Gerada, David ^{[2
]}

机构：

[1] Univ Nottingham, Elect Syst & Opt Div, PEMC Grp, Nottingham, England

[2] Cummins Generator Technol, Res & Technol Dept, Stamford, England

来源：

2015 INTERNATIONAL CONFERENCE ON ELECTRICAL SYSTEMS FOR AIRCRAFT, RAILWAY, SHIP PROPULSION AND ROAD VEHICLES (ESARS) | 2015年

关键词：

traction; electrical machine; concentrated wound; distributed wound; interior permenant magnet; pole number; slot number;

D O I：

暂无

中图分类号：

V [航空、航天];

学科分类号：

08 ; 0825 ;

摘要：

This paper presents considerations for the design of high performance, interior permanent magnet machines for traction applications. These machines will be designed to reach the FreedomCar 2020 targets set by the US Department of Energy for the year 2020 for traction machines, considering both concentrated and distributed wound designs. The paper presents a trade-off study of a wide range of motor designs with the main focus on the number of rotor poles and stator slots. The results from this investigation are then used to achieve an optimal design in terms of the target requirements, as these are introduced in a logical sequence.

引用

页数：6

共 50 条

[1] Development and Design of a High Performance Traction Machine for the FreedomCar 2020 Traction Machine Targets
Walker, Adam
Galea, Michael
Gerada, David
Gerada, Chris
Mebarki, Abdeslam
Brown, Neil
2016 XXII INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES (ICEM), 2016, : 1611 - 1617
[2] A Topology Selection Consideration of Electrical Machines for Traction Applications: Towards the FreedomCar 2020 Targets
Walker, Adam
Galea, Michael
Gerada, Chris
Mebarki, Abdeslam
Gerada, David
2015 TENTH INTERNATIONAL CONFERENCE ON ECOLOGICAL VEHICLES AND RENEWABLE ENERGIES (EVER), 2015,
[3] Design Considerations of Magnet Configurations in Interior Permanent Magnet Machines for High-Speed Traction Applications: A Comprehensive Study
Husain, Tausif
Lee, Seong T.
Ma, Cong
IEEE INDUSTRY APPLICATIONS MAGAZINE, 2022, 28 (06) : 14 - 26
[4] High Speed Electric Machines - Challenges and Design Considerations
Li, Silong
Li, Yingjie
Choi, Wooyoung
Sarlioglu, Bulent
2014 INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES (ICEM), 2014, : 2549 - 2555
[5] Design Considerations, Analysis and Comparison for High-performance Surface Permanent Magnet Vernier Machines
Zhu, Jingwei
Wang, Huanzhi
Shen, Yiming
Yamamoto, Hiroshi
Kajitani, Ryo
Lee, Christopher H. T.
2024 IEEE TRANSPORTATION ELECTRIFICATION CONFERENCE AND EXPO, ITEC 2024, 2024,
[6] Design Considerations of Switched Reluctance Machines with High Power Density
Yu, Q.
Bilgin, B.
Emadi, A.
2016 IEEE TRANSPORTATION ELECTRIFICATION CONFERENCE AND EXPO (ITEC), 2016,
[7] High-Speed Electric Machines: Challenges and Design Considerations
Li, Silong
Li, Yingjie
Choi, Wooyoung
Sarlioglu, Bulent
IEEE TRANSACTIONS ON TRANSPORTATION ELECTRIFICATION, 2016, 2 (01): : 2 - 13
[8] Design Considerations for Scalable High-Performance Vision Systems Embedded in Industrial Print Inspection Machines
Fuertler, Johannes
Roessler, Peter
Brodersen, Joerg
Nachtnebel, Herbert
Mayer, Konrad J.
Cadek, Gerhard
Eckel, Christian
EURASIP JOURNAL ON EMBEDDED SYSTEMS, 2007, (01)
[9] Influence of rotor design on performance of PM machines for heavy-duty traction applications
Jacob, Jubin
Paulides, Johannes J. H.
Lomonova, Elena
COMPEL-THE INTERNATIONAL JOURNAL FOR COMPUTATION AND MATHEMATICS IN ELECTRICAL AND ELECTRONIC ENGINEERING, 2014, 33 (05) : 1541 - 1557
[10] Design Considerations for Magnet Configurations in IPM Rotor High Speed Traction Applications
Husain, Tausif
Lee, Seong T.
2019 IEEE ENERGY CONVERSION CONGRESS AND EXPOSITION (ECCE), 2019, : 6062 - 6069

← 1 2 3 4 5 →