Kinetostatic model of overconstrained lower mobility parallel manipulators

被引：43
|
作者：
Hu, Bo [1 ,2 ]
Huang, Zhen [1 ,2 ]
机构：
[1] Yanshan Univ, Parallel Robot & Mechatron Syst Lab Hebei Prov, Qinhuangdao 066004, Hebei, Peoples R China
[2] Yanshan Univ, Minist Natl Educ, Key Lab Adv Forging & Stamping Technol & Sci, Qinhuangdao 066004, Hebei, Peoples R China
来源：
NONLINEAR DYNAMICS | 2016年 / 86卷 / 01期
基金：
中国国家自然科学基金;
关键词：
Parallel manipulator; Overconstrained PM; Kinetostatic; DESIGN; ROBOT;
D O I：
10.1007/s11071-016-2890-2
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The kinetostatic model of overconstrained lower mobility parallel manipulators (PMs) is established in this paper. Based on this model, the actuator wrenches and the constrained wrenches can be completely derived, and the stiffness and the deformation of each leg and the moving platform can be obtained. A novel 2-RPU + UPR (revolute joint-prismatic joint-universal joint+universal joint-prismatic joint-revolute joint) PM is presented to illustrate the approach to solving the kinetostatic of overconstrained PMs. Due to the particular arrangement of the joints in each legs, this PM provides six constraints to the moving platform, whereas three of them are overconstraints. The detailed kinetostatic of this PM is obtained based on the established model. The unified stiffness finite element (FE) model for various PMs is established, and the stiffness of the 2-RPU + UPR PM is verified.
引用
收藏
页码：309 / 322
页数：14
相关论文
共 50 条
  • [21] Motion/Force Constrainability Analysis of Lower-Mobility Parallel Manipulators
    Liu, Xin-Jun
    Chen, Xiang
    Nahon, Meyer
    JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME, 2014, 6 (03):
  • [22] The kinematics and type synthesis of lower-mobility parallel robot manipulators
    Huang, Z
    ELEVENTH WORLD CONGRESS IN MECHANISM AND MACHINE SCIENCE, VOLS 1-5, PROCEEDINGS, 2004, : 65 - 76
  • [23] A General Approach for Geometric Error Modeling of Lower Mobility Parallel Manipulators
    Liu, Haitao
    Huang, Tian
    Chetwynd, Derek G.
    JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME, 2011, 3 (02):
  • [24] Mobility Analysis of Non-overconstrained Reconfigurable Parallel Manipulators with 3-CPU/3-CRU Kinematics
    Palpacelli, Matteo
    Carbonari, Luca
    Palmieri, Giacomo
    Callegari, Massimo
    ADVANCES IN RECONFIGURABLE MECHANISMS AND ROBOTS II, 2016, 36 : 189 - 200
  • [25] Kinetostatics modeling and elasto-geometrical calibration of overconstrained parallel manipulators
    Wu, Haiyu
    Liang, Zhenkun
    Zhang, Zhuang
    Kong, Lingyu
    Wang, Hao
    Chen, Genliang
    MECHANISM AND MACHINE THEORY, 2024, 191
  • [26] Force/motion transmissibility analyses of redundantly actuated and overconstrained parallel manipulators
    Liu, Haitao
    Huang, Tian
    Kecskemethy, Andres
    Chetwynd, Derek G.
    Li, Qing
    MECHANISM AND MACHINE THEORY, 2017, 109 : 126 - 138
  • [27] Geometric analysis of overconstrained parallel manipulators with three and four degrees of freedom
    Zhao, TS
    Dai, JS
    Huang, Z
    JSME INTERNATIONAL JOURNAL SERIES C-MECHANICAL SYSTEMS MACHINE ELEMENTS AND MANUFACTURING, 2002, 45 (03) : 730 - 740
  • [28] General methodology for type synthesis of symmetrical lower-mobility parallel manipulators and several novel manipulators
    Huang, Z
    Li, QC
    INTERNATIONAL JOURNAL OF ROBOTICS RESEARCH, 2002, 21 (02): : 131 - 145
  • [29] Structural Synthesis Based on POC Set for Lower-Mobility Non-overconstrained Parallel Mechanisms
    Zhu, Xiaorong
    Yao, Xin
    Shen, Huiping
    Sun, Chen
    Yang, Tingli
    ADVANCES IN RECONFIGURABLE MECHANISMS AND ROBOTS II, 2016, 36 : 327 - 338
  • [30] Graphical User Interface for the Singularity Analysis of Lower-Mobility Parallel Manipulators
    Caro, Stephane
    Nurahmi, Latifah
    Wenger, Philippe
    NEW TRENDS IN MECHANISM AND MACHINE SCIENCE: FROM FUNDAMENTALS TO INDUSTRIAL APPLICATIONS, 2015, 24 : 21 - 30
12345