Spalling mechanism of oxide scale formed on Cr-Mo steels in steam

被引：0
|
作者：
Fujikawa, H
Otsuka, N
Shida, Y
机构：
[1] Sumitomo Met Ind Ltd, Steel Plate & Sheet Div, Amagasaki, Hyogo 660, Japan
[2] Sumitomo Met Ind Ltd, Corp Res & Dev Labs, Amagasaki, Hyogo 660, Japan
[3] Sumitomo Met Ind Ltd, Adv Technol Res Labs, Amagasaki, Hyogo 660, Japan
来源：
NIPPON KAGAKU KAISHI | 1998年 / 01期
关键词：
D O I：
10.1246/nikkashi.1998.60
中图分类号：
O6 [化学];
学科分类号：
0703 ;
摘要：
Various kinds of Cr-Mo steel tubes are used in superheaters and reheaters of boilers. The troubles related to the spalling of the oxide scale formed on Cr-Mo steels in steam had been reported in the U.S.A. and Europe. The present study is aimed at identifying the allowable operating conditions for boilers using Cr-Mo steels. The effect of various factors on the spalling behavior of the oxide scale formed on Cr-Mo steels in steam was examined and analyzed. Among all the factors considered, the thermal strain generated by the thermal shock showed the strongest effect on the spalling behavior. When the temperature difference of the innner and outer surface of the oxide scale was above 150 K, the spalling of the oxide scale on 2.1/4Cr-1Mo steel tube was observed in the thermal shock tests. The effects of other factors were found to be insignificant for the spalling of the oxide scale.
引用
收藏
页码：60 / 71
页数：12
相关论文
共 50 条
  • [31] CREEP-BEHAVIOR OF SERVICE EXPOSED CR-MO STEELS
    RADHAKRISHNAN, VM
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1991, 145 (02): : L27 - L29
  • [32] Influence of vanadium carbide on reheat cracking of Cr-Mo steels
    Tamaki, Koreaki
    Li, Min-Long
    Suzuki, Jippei
    Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, 1993, 11 (03): : 449 - 453
  • [33] INVESTIGATION OF THE CONTACT FATIGUE OF CR-MO STEELS FOR COLD ROLLS
    MAGNEE, A
    LECOMTE, C
    SANTKIN, E
    GASPARD, C
    COSSE, P
    MEMOIRES ET ETUDES SCIENTIFIQUES DE LA REVUE DE METALLURGIE, 1984, 81 (7-8): : 373 - 382
  • [34] Recovery Kinetics of Cold-Deformed Cr-Mo Steels
    Vicente Alvarez, M. A.
    Marchena, M.
    Perez, T.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2008, 39A (13): : 3283 - 3290
  • [35] EFFECT OF RESTRAINT STRESS ON CRACK-INITIATING TEMPERATURE OF REHEAT CRACKING OF Cr-Mo STEELS: (STUDY OF REHEAT CRACKING OF Cr-Mo STEELS, REPORT 6).
    Suzuki, Jippei
    Tamaki, Koreaki
    Kojima, Masatoshi
    Transactions of the Japan Welding Society, 1986, 17 (02): : 164 - 170
  • [36] Impact of Welding Temperature Regime on Hardness of Cr-Mo Steels
    Sohag M.S.H.
    Prabhu S.
    Omarov B.
    Kazakh A.-F.
    Kumar R.S.
    Natarajan M.P.
    Ramaiah G.B.
    Ramarao M.
    International Journal of Vehicle Structures and Systems, 2023, 15 (05) : 623 - 630
  • [37] STUDY OF THE CONTACT FATIGUE OF CR-MO STEELS BY COLD CYLINDERS
    MAGNEE, A
    LECOMTE, C
    HABRAKEN, L
    GASPARD, C
    MASSAUX, H
    MEMOIRES ET ETUDES SCIENTIFIQUES DE LA REVUE DE METALLURGIE, 1981, 78 (09): : 447 - 447
  • [38] EFFECT OF IRRADIATION IN HFIR ON TENSILE PROPERTIES OF CR-MO STEELS
    KLUEH, RL
    MAZIASZ, PJ
    JOURNAL OF NUCLEAR MATERIALS, 1992, 187 (01) : 43 - 54
  • [39] INTERACTION OF AMMONIA WITH THE SURFACE OF CR-MO AND CR-MO-TE OXIDE CATALYSTS
    KUZNETSOV, VA
    KHOLYAVENKO, KM
    GOROKHOVATSKII, YB
    BELOUSOV, VM
    REACTION KINETICS AND CATALYSIS LETTERS, 1979, 10 (01): : 49 - 54
  • [40] SCANNING AUGER INVESTIGATIONS OF EMBRITTLEMENT PHENOMENA IN CR-NI AND CR-MO STEELS
    GORETZKI, H
    VONROSENSTIEL, P
    SPECTROCHIMICA ACTA PART B-ATOMIC SPECTROSCOPY, 1985, 40 (5-6) : 853 - 858
12345