Effect of filler wires and direct ageing on the microstructure and mechanical properties in the multi-pass welding of Inconel 718

被引：53

作者：

Ramkumar, K. Devendranath ^{[1
]}

Sai, R. Jagat ^{[1
]}

Reddy, V. Santhosh ^{[1
]}

Gundla, Sridhar ^{[1
]}

Mohan, T. Harsha ^{[1
]}

Saxena, Vimal ^{[1
]}

Arivazhagan, N. ^{[1
]}

机构：

[1] VIT Univ, Sch Mech & Bldg Sci, Vellore, Tamil Nadu, India

来源：

JOURNAL OF MANUFACTURING PROCESSES | 2015年 / 18卷

关键词：

Inconel; 718; Pulsed current gas tungsten arc welding; Microstructure; Mechanical characterization; Direct ageing heat treatment; LAVES PHASE;

D O I：

10.1016/j.jmapro.2015.01.001

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper investigates the weldability, microstructure and mechanical properties of 5 mm thick Inconel 718 plates obtained by pulsed current gas tungsten arc welding (PCGTAW) using ERNiCu-7, ERNiCrCoMo-1 and ERNiCr-3 fillers. Post weld heat treatment (PWHT) was also carried out at 720 degrees C/8 h/furnace cooling followed by 620 degrees C/8 h/air cooling on the weldments. A comparative evaluation based on the microstructure features and mechanical properties of both the as-welded and aged samples were studied. Further this study addressed the combined effect of filler wires and post weld heat treatment on the metallurgical and mechanical properties of the weldments. The studies showed the improvement in tensile strength and drop in impact toughness for all the weldments after direct ageing heat treatment. (C) 2015 The Society of Manufacturing Engineers. Published by Elsevier Ltd. All rights reserved.

引用

页码：23 / 45

页数：23

共 50 条

[21] Effect of pretreatment process on microstructure and mechanical properties in Inconel 718 alloy
Zhu, Jiajia
Yuan, Wuhua
JOURNAL OF ALLOYS AND COMPOUNDS, 2023, 939
[22] Effect of friction stir welding speed on mechanical properties and microstructure of nickel based super alloy Inconel 718
Ahmed, M. M. Z.
Wynne, B. P.
Martin, J. P.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2013, 18 (08) : 680 - 687
[23] MECHANICAL PROPERTIES OF MULTI-PASS WELDS
KOLYAKIN, NN
ERSHOV, VA
UDOVICHE.IP
AUTOMATIC WELDING USSR, 1966, 19 (10): : 60 - &
[24] Effect of processing routes in a multi-pass continuous hybrid process on mechanical properties, microstructure, and texture evolutions of low-carbon steel wires
Sun Kwang Hwang
Hyun Moo Baek
Ho Seon Joo
Yong-Taek Im
Metals and Materials International, 2015, 21 : 391 - 401
[25] Effect of processing routes in a multi-pass continuous hybrid process on mechanical properties, microstructure, and texture evolutions of low-carbon steel wires
Hwang, Sun Kwang
Baek, Hyun Moo
Joo, Ho Seon
Im, Yong-Taek
METALS AND MATERIALS INTERNATIONAL, 2015, 21 (02) : 391 - 401
[26] Effect of Filler Metals on the Weldability and Mechanical Properties of Multi-pass PCGTA Weldments of AISI 316L
K. Devendranath Ramkumar
P. Maruthi Mohan Reddy
B. Raja Arjun
Ayush Choudhary
Anubhav Srivastava
N. Arivazhagan
Journal of Materials Engineering and Performance, 2015, 24 : 1602 - 1613
[27] Effect of Filler Metals on the Weldability and Mechanical Properties of Multi-pass PCGTA Weldments of AISI 316L
Ramkumar, K. Devendranath
Reddy, P. Maruthi Mohan
Arjun, B. Raja
Choudhary, Ayush
Srivastava, Anubhav
Arivazhagan, N.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2015, 24 (04) : 1602 - 1613
[28] Investigation on microstructure of thick plate stainless steel joint welded by multi-pass laser welding with filler wire
Wang, B. (wangbp@sjtu.edu.cn), 1600, Science Press (40):
[29] Effect of strain on the microstructure and mechanical properties of multi-pass warm caliber rolled low carbon steel
Torizuka, S
Ohmori, A
Murty, SVSN
Nagai, K
SCRIPTA MATERIALIA, 2006, 54 (04) : 563 - 568
[30] Effect of Pb on the Mechanical Properties of Inconel 718
Iijima, Yuri
Kakehi, Koji
JOURNAL OF THE JAPAN INSTITUTE OF METALS AND MATERIALS, 2014, 78 (05) : 201 - 204

← 1 2 3 4 5 →