Different Curing Agents on the Photoaging of Polyurethane Coatings

被引:1
|
作者
Xiang, Bin [1 ]
Xiang, Qing [1 ]
Liao, Jin [2 ]
Chen, Shi [2 ]
Xu, Zhongcheng [2 ]
机构
[1] Chongqing Univ, Coll Chem & Chem Engn, Chongqing 400044, Peoples R China
[2] Chongqing Sanxia Paint Co Ltd, Chongqing 402260, Peoples R China
来源
关键词
UV Accelerated Aging; Curing Agent; Polyurethane; Photoaging; DURABILITY;
D O I
10.4028/www.scientific.net/AMR.189-193.1109
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
In this paper, the artificial UV accelerated aging test was used to investigate the effect of curing agents including TDI-TMP prepolymer, N75, N3390 and IPDI propylene acid resin on the photoaging of polyurethane (PU) coatings. The thickness and gloss loss, color difference, as well as UV absorption of PU coatings were measured during the UV exposure, meanwhile FTIR and SEM were utilized to monitor the chemical and mophological change after UV exposure. The TDI-TMP prepolymer coatings showed the worst aging resistance and whilst the results of N3390 coatings are relatively good.
引用
收藏
页码:1109 / +
页数:2
相关论文
共 50 条
  • [31] Polyurethane powder coatings with low curing temperature: Research on the effect of chemical structure of crosslinking agent on the properties of coatings
    Czachor-Jadacka, Dominika
    Pilch-Pitera, Barbara
    Kisiel, Maciej
    Thomas, Jomin
    PROGRESS IN ORGANIC COATINGS, 2023, 182
  • [32] MANCHESTER SECTION - NEWER CURING AGENTS FOR EPOXY-RESIN COATINGS
    LANGDON, M
    JOCCA-SURFACE COATINGS INTERNATIONAL, 1995, 78 (09): : 398 - 399
  • [33] The use of dihydrazides as latent curing agents in diglycidyl ether of bisphenol A coatings
    Tomuta, Adrian M.
    Ramis, Xavier
    Ferrando, Francesc
    Serra, Angels
    PROGRESS IN ORGANIC COATINGS, 2012, 74 (01) : 59 - 66
  • [34] Properties of conductive adhesives based on different curing agents
    Lu, DQ
    Wong, D
    Wong, CP
    JOURNAL OF ELECTRONICS MANUFACTURING, 1999, 9 (04): : 241 - 248
  • [35] Cold curing polyurethane
    不详
    FOREST PRODUCTS JOURNAL, 1996, 46 (06) : 16 - 16
  • [36] Effect of Curing Agents on Electrical Properties of Low-Temperature Curing Conductive Coatings and Thermodynamic Analysis
    Shu, Junjie
    Wang, Yang
    Guo, Bei
    Qin, Weihua
    Liu, Lanxuan
    Liu, Xiusheng
    COATINGS, 2021, 11 (06)
  • [37] The Effect of Different Diluents and Curing Agents on the Performance of Epoxy Resin-Based Intumescent Flame-Retardant Coatings
    Yang, Xukun
    Wan, Yange
    Yang, Nan
    Hou, Yilin
    Chen, Dantong
    Liu, Jiachen
    Cai, Guoshuai
    Wang, Mingchao
    MATERIALS, 2024, 17 (02)
  • [38] Synthesis of Trivinylisooctyl POSS and Its Application in UV-Curing of Polyurethane Acrylate Coatings
    Wang, Yufeng
    Cao, Zhenheng
    Wang, Ziheng
    Ma, Aijuan
    COATINGS, 2022, 12 (07)
  • [39] Preparation and curing behavior of polyurethane coatings by polyester/lactone polyol and HDI-biuret
    Choi, YH
    Kim, DW
    Hwang, KH
    Park, HS
    Kim, TO
    POLYMER-KOREA, 2000, 24 (01) : 72 - 81
  • [40] Performance development of polyurethane elastomer composites in different construction and curing environments
    Chen, Qian
    Wang, Chaohui
    Li, Yanwei
    Feng, Lei
    Huang, Shuai
    CONSTRUCTION AND BUILDING MATERIALS, 2023, 365