Estimating the junction temperature of AC LEDs

被引：4
|
作者：
Liu, Yi-wei [1 ]
Jayawardena, Asiri [1 ]
Klein, Terence R. [1 ]
Narendran, Nadarajah [1 ]
机构：
[1] Rensselaer Polytech Inst, Lighting Res Ctr, Troy, NY 12180 USA
来源：
TENTH INTERNATIONAL CONFERENCE ON SOLID STATE LIGHTING | 2010年 / 7784卷
关键词：
light-emitting diode; LED; alternating current; AC; junction temperature;
D O I：
10.1117/12.863060
中图分类号：
O43 [光学];
学科分类号：
070207 ; 0803 ;
摘要：
Light-emitting diodes operating on alternating current are gaining popularity in the LED industry, especially for lighting applications. Because junction temperature is a good predictor of LED performance, the availability of a method to accurately estimate the junction temperature of AC LEDs would be very useful. This study investigated a method in which a low reference current having a pulse width of less than several milliseconds was applied and the corresponding voltage across the device was measured and correlated to the junction temperature. Laboratory experiment data showed that the proposed method is a promising candidate for estimating AC LED junction temperature.
引用
收藏
页数：6
相关论文
共 50 条
  • [41] Improving Peak-Wavelength Method to Measure Junction Temperature by Dual-Wavelength LEDs
    Zhao, Yukun
    Yun, Feng
    Feng, Lungang
    Wang, Shuai
    Li, Yufeng
    Su, Xilin
    Guo, Maofeng
    Ding, Wen
    Zhang, Ye
    IEEE ACCESS, 2017, 5 : 11712 - 11716
  • [42] Tunnel Junction Integrated Ultraviolet Nanowire LEDs
    Sarwar, A. T. M. Golam
    May, Brelon J.
    Myers, R. C.
    2015 73RD ANNUAL DEVICE RESEARCH CONFERENCE (DRC), 2015, : 71 - 72
  • [43] LEDs driven by AC without transformers or rectifiers
    Hughes, Robin W.
    Warner, Mark
    SCIENTIFIC REPORTS, 2021, 11 (01)
  • [44] LEDs driven by AC without transformers or rectifiers
    Robin W. Hughes
    Mark Warner
    Scientific Reports, 11
  • [45] Assessment of Thermal Network Models for Estimating IGBT Junction Temperature of a Buck Converter
    Alavi, Omid
    Abdollah, Mohammad
    Viki, Abbas Hooshmand
    2017 8TH POWER ELECTRONICS, DRIVE SYSTEMS & TECHNOLOGIES CONFERENCE (PEDSTC), 2017, : 102 - 107
  • [46] Analysis of junction temperature and modification of luminous flux degradation for white LEDs in a thermal accelerated reliability test
    Ke, Hong-Liang
    Jing, Lei
    Hao, Jian
    Gao, Qun
    Wang, Yao
    Wang, Xiao-xun
    Sun, Qiang
    Xu, Zhi-Jun
    APPLIED OPTICS, 2016, 55 (22) : 5909 - 5916
  • [47] Study on the variation in thermal resistance and junction temperature of GaN based LEDs using thermal transient measurement
    Nano Opto Electronics Lab. , School of Physics, Universiti Sains Malaysia , 11800 Minden, Penang, Malaysia
    Proc. Asia Symp. Qual. Electron. Des., ASQED, (310-314):
  • [48] Ohmic heating of InGaN LEDs during operation: Determination of the junction temperature and its influence on device performance
    Schwegler, V.
    Schad, S.S.
    Kirchner, C.
    Seyboth, M.
    Kamp, M.
    Ebeling, K.J.
    Kudryashov, V.E.
    Turkin, A.N.
    Yunovich, A.E.
    Stempele, U.
    Link, A.
    Limmer, W.
    Sauer, R.
    Physica Status Solidi (A) Applied Research, 1999, 176 (01): : 783 - 786
  • [49] Ohmic heating of InGaN LEDs during operation: Determination of the junction temperature and its influence on device performance
    Schwegler, V
    Schad, SS
    Kirchner, C
    Seyboth, M
    Kamp, M
    Ebeling, KJ
    Kudryashov, VE
    Turkin, AN
    Yunovich, AE
    Stempfle, U
    Link, A
    Limmer, W
    Sauer, R
    PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE, 1999, 176 (01): : 783 - 786
  • [50] A new non-contact method based on relative radiation intensity for determining junction temperature of LEDs
    Ye, Yan-Zhong
    Zheng, Xiao-Dong
    Liu, Xu
    Li, Hai-Feng
    Guangdianzi Jiguang/Journal of Optoelectronics Laser, 2009, 20 (08): : 1053 - 1057
12345