Effect of laser surface remelting on the microstructure and properties of Al-Al2Cu- Si ternary eutectic alloy

被引：17

作者：

Ramakrishnan, Bhupendera Prashanth ^{[1
]}

Lei, Qian ^{[2
]}

Misra, Amit ^{[2
]}

Mazumder, Jyoti ^{[1
,2
]}

机构：

[1] Univ Michigan, Dept Mech Engn, Coll Engn, Ann Arbor, MI 48109 USA

[2] Univ Michigan, Dept Mat Sci & Engn, Coll Engn, Ann Arbor, MI 48109 USA

来源：

SCIENTIFIC REPORTS | 2017年 / 7卷

关键词：

HIGH-STRAIN-RATE; HALL-PETCH RELATION; HIGH-STRENGTH; RAPID SOLIDIFICATION; SUPERPLASTIC BEHAVIOR; MECHANICAL-PROPERTIES; ULTRAFINE COMPOSITE; CORROSION BEHAVIOR; YIELD STRENGTH; CU ALLOYS;

D O I：

10.1038/s41598-017-13953-5

中图分类号：

O [数理科学和化学]; P [天文学、地球科学]; Q [生物科学]; N [自然科学总论];

学科分类号：

07 ; 0710 ; 09 ;

摘要：

Bimodal ultrafine eutectic composites (BUECs) exhibit a good combination of strength and plasticity owing to a dual-hierarchy in eutectic length-scales in the microstructure. The present study investigates the variation of phase, morphology, feature length-scales and modality of microstructures obtained in a Al81Cu13Si6 (at. %) ternary alloy after laser surface remelting. A novel approach of varying component bimodal eutectic volume fractions by controlling the cooling rate of the laser solidification process has been presented. The volume fraction of the fine eutectic matrix has a profound effect on the flow strength. Laser remelted microstructures with volume fractions of the fine eutectic varying from 25 to 40% exhibiting compressive flow strengths ranging from 500 to 900 MPa have been obtained. The volume fraction of the fine eutectic decreased with cooling rate and completely ceased to exist at cooling rates greater than 4 x 10(4) degrees C/ s.

引用

页数：10

共 50 条

[31] Effect of Si addition on the microstructure and mechanical properties of Al-Cu-Mg alloy
Wang Feng
Zeng Yanqi
Xiong Baiqing
Zhang Yongan
Li Xiwu
Li Zhihui
Liu Hongwei
JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 585 : 474 - 478
[32] Effect of alloying Cu on the microstructure and properties of Al-Si-Sr-Ti alloy
Meng, Xianqi
Shuang, Danyang
Xia, Wenchao
Liu, Xinli
Wang, Nan
Materials Letters, 2025, 382
[33] Developing of nano sized fibrous eutectic silicon in hypereutectic Al-Si alloy by laser remelting
Abboud, Jaafar
Mazumder, Jyoti
SCIENTIFIC REPORTS, 2020, 10 (01)
[34] Effect of Temperature Gradient and Growth Velocity on Microstructure and Mechanical Properties on Zn-7Al-3Cu Ternary Eutectic Alloy
Yilmazer, I.
Cadirli, E.
INTERNATIONAL JOURNAL OF METALCASTING, 2021, 15 (02) : 664 - 675
[35] Microstructure and mechanical properties of eutectic Al-Si alloy modified with Al-3B
Li H.-B.
Tu H.
Peng H.-P.
Wu C.-J.
Wang J.-H.
Su X.-P.
Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals, 2019, 29 (08): : 1599 - 1605
[36] Laser surface remelting of a Cu-Al-Ni-Mn shape memory alloy
da Silva, Murillo Romero
Gargarella, Piter
Gustmann, Tobias
Botta Filho, Walter Jose
Kiminami, Claudio S.
Eckert, Juergen
Pauly, Simon
Bolfarini, Claudemiro
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 661 : 61 - 67
[37] Effects of Mn Content on Microstructure, Mechanical and Dry Sliding Wear Properties of Eutectic Al–Si–Cu Alloy
Yasin Alemdag
Murat Beder
Metals and Materials International, 2020, 26 : 1811 - 1819
[38] Microstructure and mechanical properties of Al-Si eutectic alloy modified with Al-3P master alloy
Wang, Shuo
Fu, Min
Li, Xiazhang
Wang, Jianhua
Su, Xuping
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2018, 255 : 105 - 109
[39] Directional Solidification of Al–Si–Ti Irregular Ternary Eutectic Alloy and Thermophysical Properties
ÜMİT Bayram
Metallurgical and Materials Transactions B, 2022, 53 : 3865 - 3881
[40] Effect of a high axial magnetic field on the microstructure in a directionally solidified Al-Al2Cu eutectic alloy
Li, Xi
Ren, Zhongming
Fautrelle, Yves
ACTA MATERIALIA, 2006, 54 (20) : 5349 - 5360

← 1 2 3 4 5 →