Evaluation of machinability by cutting environments in high-speed milling of difficult-to-cut materials

被引：61
|
作者：
Kim, SW [1 ]
Lee, DW [1 ]
Kang, MC [1 ]
Kim, JS [1 ]
机构：
[1] Pusan Natl Univ, NSDM, ERC, Pusan 609735, South Korea
来源：
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 2001年 / 111卷 / 1-3期
关键词：
difficult-to-cut materials; high-speed machining; compressed chilly-air system; tool life;
D O I：
10.1016/S0924-0136(01)00529-5
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
High-speed machining of difficult-to-cut materials generates concentrated thermal/frictional damage at the cutting edge of the tool and rapidly decreases the tool life. In this paper, the cutting environments, such as dry, flood coolant, and compressed chilly-air coolant, were investigated to improve the tool life. For this study, a compressed chilly-air system was manufactured. The experiments were performed for various hardened materials and various coated tools. The effectiveness of the developed methods on the basis of tool life was estimated. The results show that the cutting environment using compressed chilly-air coolant provided better tool life than suing flood coolant or using a dry environment. (C) 2001 Elsevier Science B.V. All rights reserved.
引用
收藏
页码：256 / 260
页数：5
相关论文
共 50 条
  • [21] A cutting process parameter optimization expert system for difficult-to-cut materials
    Wang, Zhenbo
    Li, Zhenjia
    Zhu, Denghui
    ADVANCES IN MACHINING AND MANUFACTURING TECHNOLOGY IX, 2008, 375-376 : 574 - 577
  • [22] HIGH SPEED MILLIG OF DIFFICULT-TO-CUT MATERIALS WITH SMALL DIAMETER BALL END MILL
    Takeoka, Etsuo
    PROGRESS OF MACHINING TECHNOLOGY, 2012, : 8 - 18
  • [23] Investigation of machinability in turning of difficult-to-cut materials using a new cryogenic cooling approach
    Bagherzadeh, Amin
    Budak, Erhan
    TRIBOLOGY INTERNATIONAL, 2018, 119 : 510 - 520
  • [24] Research of Tool Nose Radius in Ultrasonic Vibration Cutting for Difficult-to-cut Materials
    Huang, Taoxian
    Xiao, Min
    PROCEEDINGS OF THE 2017 2ND INTERNATIONAL CONFERENCE ON MATERIALS SCIENCE, MACHINERY AND ENERGY ENGINEERING (MSMEE 2017), 2017, 123 : 442 - 445
  • [25] Machinability analysis of difficult-to-cut material during ultrasonic vibration-assisted ball end milling
    Ahmed, Farooq
    Ko, Tae Jo
    Kurniawan, Rendi
    Kwack, Yein
    MATERIALS AND MANUFACTURING PROCESSES, 2021, 36 (15) : 1734 - 1745
  • [26] The Influence of Milling Parameters on Cutting Forces in High-Speed Milling of Polymer Materials
    Uysal, Alper
    Dzhemilov, Eshreb
    Dzhemalyadinov, Ruslan
    ADVANCES IN DESIGN, SIMULATION AND MANUFACTURING III: MANUFACTURING AND MATERIALS ENGINEERING, VOL 1, 2020, : 462 - 470
  • [27] Ultra-precision cutting of difficult-to-cut metals
    Sakamoto, S
    Yasui, H
    Kawada, M
    Kondo, S
    INITIATIVES OF PRECISION ENGINEERING AT THE BEGINNING OF A MILLENNIUM, 2001, : 234 - 238
  • [28] Influence of Cutting Speed on Cutting Force in High-speed Milling
    Zhao, Zhenyu
    Xiao, Yongshan
    Zhu, Yongqi
    Liu, Bai
    MANUFACTURING ENGINEERING AND AUTOMATION I, PTS 1-3, 2011, 139-141 : 835 - 838
  • [29] Hot machining of difficult-to-cut materials: A review
    Pandey, Kshitij
    Datta, Saurav
    MATERIALS TODAY-PROCEEDINGS, 2021, 44 : 2710 - 2715
  • [30] Development trends of drills for difficult-to-cut materials
    Iwamoto K.
    1600, Japan Society for Precision Engineering (86): : 863 - 867
12345