Micro Wire Electro Discharge Grinding: Optimization of Material Removal Rate and Surface Roughness

被引：1
|
作者：
Ali, Mohammad Yeakub [1 ]
Abd Rahman, Mohamed [1 ]
Nordin, Rosmarina [1 ]
机构：
[1] Int Islamic Univ Malaysia, Dept Mfg & Mat Engn, POB 10, Kuala Lumpur 50728, Malaysia
来源：
3RD INTERNATIONAL CONFERENCE ON MECHANICAL, AUTOMOTIVE AND AEROSPACE ENGINEERING 2016 | 2017年 / 184卷
关键词：
D O I：
10.1088/1757-899X/184/1/012032
中图分类号：
V [航空、航天];
学科分类号：
08 ; 0825 ;
摘要：
This paper presents the analysis and modelling of material removal rate (MRR) and surface roughness (Ra) by micro wire electro discharge grinding (micro-WEDG) with control parameter of gap voltage, feed rate, and spindle speed. The data were analyzed and empirical models are developed. The optimized values of MRR and Ra are 0.051 mm3/min and 0.25 m respectively with 110 V gap voltage, 38 mu m/s feed rate, and 1315 rpm spindle speed. The analysis showed that gap voltage has significant effect on material removal rate while spindle speed has significant effect on surface roughness.u
引用
收藏
页数：7
相关论文
共 50 条
  • [31] Investigation of aluminum alloy 6061 in Wire-EDM regarding surface roughness and material removal rate by adopting optimization techniques
    Rawat, R. K.
    Saif, M.
    JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES, 2023, 17 (01) : 9410 - 9420
  • [32] Artificial neural network-based and response surface methodology-based predictive models for material removal rate and surface roughness during electro-discharge diamond grinding of Inconel 718
    Unune, Deepak Rajendra
    Mali, Harlal Singh
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2016, 230 (11) : 2082 - 2091
  • [33] Investigation of Surface Roughness and Material Removal Rate (MRR) on Tool Steel Using Brass and Copper Electrode for Electrical Discharge Grinding (EDG) Process
    Helmi, M. Hafiz
    Azuddin, M.
    Abdullah, W.
    INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, 2009, 1 (01): : 31 - 39
  • [34] MATERIAL REMOVAL RATE AND SURFACE ROUGHNESS ON GRINDING OF DUCTILE CAST IRON USING MINIMUM QUANTITY LUBRICATION
    Rahman, M. M.
    Kadirgama, K.
    INTERNATIONAL JOURNAL OF AUTOMOTIVE AND MECHANICAL ENGINEERING, 2015, 11 : 2471 - 2483
  • [35] Parametric effect on material removal rate and surface roughness of electrical discharge machined magnesium alloy
    Ananthi, Narayanasamy
    Elaiyarasan, Uthirapathi
    Satheeshkumar, Vinaitheerthan
    Senthilkumar, Chinnamuthu
    Sathiyamurthy, Subbarayan
    Nallathambi, Kaliyamoorthi
    METALLURGICAL RESEARCH & TECHNOLOGY, 2021, 118 (06)
  • [36] EXPERIMENTAL INVESTIGATION OF SURFACE ROUGHNESS IN CYLINDRICAL WIRE ELECTRO DISCHARGE MACHINING (CWEDM)
    Mohammadi, Hossein
    Tehrani, Alireza Fadaei
    Hamadani, Ali Z.
    Mohammadi, Aminollah
    MSEC 2008: PROCEEDINGS OF THE ASME INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE 2008, VOL 1, 2009, : 219 - 226
  • [37] Fuzzy logic-based model for predicting material removal rate and average surface roughness of machined Nimonic 80A using abrasive-mixed electro-discharge diamond surface grinding
    Deepak Rajendra Unune
    Mohsen Marani Barzani
    Suhas S. Mohite
    Harlal Singh Mali
    Neural Computing and Applications, 2018, 29 : 647 - 662
  • [38] Fuzzy logic-based model for predicting material removal rate and average surface roughness of machined Nimonic 80A using abrasive-mixed electro-discharge diamond surface grinding
    Unune, Deepak Rajendra
    Barzani, Mohsen Marani
    Mohite, Suhas S.
    Mali, Harlal Singh
    NEURAL COMPUTING & APPLICATIONS, 2018, 29 (09): : 647 - 662
  • [39] Investigation of material removal rate and surface roughness using multi-objective optimization for micro-milling of inconel 718
    Lu, Xiaohong
    Wang, FuRui
    Xue, Liang
    Feng, Yixuan
    Liang, Steven Y.
    INDUSTRIAL LUBRICATION AND TRIBOLOGY, 2019, 71 (06) : 787 - 794
  • [40] Investigation of material removal rate and surface roughness in wire electrical discharge machining process for cementation alloy steel using artificial neural network
    Saeid Shakeri
    Aazam Ghassemi
    Mohsen Hassani
    Alireza Hajian
    The International Journal of Advanced Manufacturing Technology, 2016, 82 : 549 - 557
12345