Microstructure of Weld Joint of Additive Manufactured Ti-6Al-4V Alloy

被引：0
|
作者：
Iakhin, A. [1 ]
Kazachenok, M. S. [2 ]
机构：
[1] Natl Res Tomsk Polytechn Univ, 30 Lenin Ave, Tomsk 634050, Russia
[2] RAS, Inst Strength Phys & Mat Sci, SB, 2-4 Pr Akad Skii, Tomsk 634055, Russia
来源：
PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS WITH HIERARCHICAL STRUCTURE FOR NEW TECHNOLOGIES AND RELIABLE STRUCTURES 2019 | 2019年 / 2167卷
关键词：
D O I：
10.1063/1.5132006
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Microstructure and phase composition in fusion zone, heat affected zone and base metal of Ti-6Al-4V samples, produced by Selective Laser Melting (SLM) and Electron Beam Free-Form Fabrication (EBF3) methods were studied. Metallographic analysis was performed to compare sizes of prior columnar beta grains and acicular a. phase formed in the weld of Ti-6Al-4V samples obtained by different additive manufacturing methods. X-ray diffraction analysis revealed a change of beta phase volume fraction in the weld of 3D printing Ti-6Al-4V samples. Distribution of Vickers microhardness of weld joint cross section specimens was under study.
引用
收藏
页数：4
相关论文
共 50 条
  • [11] Corrosion Behavior of Additive Manufactured Ti-6Al-4V Alloy in NaCl Solution
    Jingjing Yang
    Huihui Yang
    Hanchen Yu
    Zemin Wang
    Xiaoyan Zeng
    Metallurgical and Materials Transactions A, 2017, 48 : 3583 - 3593
  • [12] Laser additive manufactured Ti-6Al-4V alloy: tribology and corrosion studies
    Chandramohan, P.
    Bhero, Shepherd
    Obadele, Babatunde Abiodun
    Olubambi, Peter Apata
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 92 (5-8): : 3051 - 3061
  • [13] Laser Additive Manufactured Ti-6Al-4V Alloy: Heat Treatment Studies
    Chandramohan, P.
    Bhero, Shepherd
    Varachia, Farouk
    Obadele, Babatunde Abiodun
    Olubambi, Peter Apata
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2018, 71 (03) : 579 - 587
  • [14] Study on Microstructures and Properties of Additive Manufactured Ti-6Al-4V Alloy with Boron
    Li Changfu
    Ren Haoxian
    Bu Jiaqi
    Wang Xiangming
    Yang Guang
    CHINESE JOURNAL OF LASERS-ZHONGGUO JIGUANG, 2021, 48 (18):
  • [15] Corrosion Behavior of Additive Manufactured Ti-6Al-4V Alloy in NaCl Solution
    Yang, Jingjing
    Yang, Huihui
    Yu, Hanchen
    Wang, Zemin
    Zeng, Xiaoyan
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2017, 48A (07): : 3583 - 3593
  • [16] Rapid screening of creep resistance in additive manufactured Ti-6Al-4V alloy
    Pellicotte, Jacob
    Hossain, Md Abir
    Egan, Ashton J.
    Mills, Michael J.
    Stewart, Calvin M.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2024, 913
  • [17] Spall fracture in additive manufactured Ti-6Al-4V
    Jones, D. R.
    Fensin, S. J.
    Dippo, O.
    Beal, R. A.
    Livescu, V.
    Martinez, D. T.
    Trujillo, C. P.
    Florando, J. N.
    Kumar, M.
    Gray, G. T., III
    JOURNAL OF APPLIED PHYSICS, 2016, 120 (13)
  • [18] Ultrasonic Assessment of Additive Manufactured Ti-6Al-4V
    Schehl, Norman
    Kramb, Vicki
    Dierken, Josiah
    Aldrin, John
    Schwalbach, Edwin
    John, Reji
    44TH ANNUAL REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, VOL 37, 2018, 1949
  • [19] Microstructure and mechanical analysis of Ti-6Al-4V laser butt weld joint
    College of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China
    Hanjie Xuebao, 2009, 2 (103-106):
  • [20] Bonding Zone Microstructure and Mechanical Properties of Forging-Additive Hybrid Manufactured Ti-6Al-4V Alloy
    Ma Jiankai
    Li Junjie
    Wang Zhijun
    Wang Yujian
    Wang Jincheng
    ACTA METALLURGICA SINICA, 2021, 57 (10) : 1246 - 1257
12345