Bonding strength of resin cement to silicate glass ceramics for dental CAD/CAM systems is enhanced by combination treatment of the bonding surface

被引：10
|
作者：
Shimakura, Yusuke
Hotta, Yasuhiro
Fujishima, Akihiro
Kunii, Jun
Miyazaki, Takashi
Kawawa, Tadaharu
机构：
[1] Showa Univ, Sch Dent, Dept Oral Biomat & Technol, Shinagawa Ku, Tokyo 1428555, Japan
[2] Showa Univ, Dept Prosthodont, Sch Dent, Tokyo 1458515, Japan
来源：
DENTAL MATERIALS JOURNAL | 2007年 / 26卷 / 05期
关键词：
glass ceramics; shear bond strength; surface modification;
D O I：
10.4012/dmj.26.713
中图分类号：
R78 [口腔科学];
学科分类号：
1003 ;
摘要：
To increase the bond strength of CAD/CAM-fabricated, leucite-reinforced glass ceramics with a resin cement, the effects of the following were investigated: surface modification by tribochemical (TBC) treatment, followed by combined application of a silane coupling agent and a functional monomer as a primer. Bond strength was evaluated by a shear bond test. It was found that a silane coupling agent was useful for all the surfaces, particularly for the TBC-treated surface. This was because of the presence of a silica layer on the modified surface. The combination of a silane coupling agent and a functional monomer on the TBC surface allowed marked improvement in bonding, whereby the bonding endured 20,000 cycles of thermal cycling. Therefore, TBC treatment in combination with a silane coupling agent and a functional monomer as a primer substantially increased the bond strength of CAD/CAM-fabricated glass ceramics with resin cement, if the treatment conditions were appropriate.
引用
收藏
页码：713 / 721
页数：9
相关论文
共 50 条
  • [21] Effect of differences in the type of restoration and adhesive resin cement system on the bonding of CAD/CAM ceramic restorations
    Koshida, Seisuke
    Maeno, Masahiko
    Nara, Yoichiro
    DENTAL MATERIALS JOURNAL, 2020, 39 (06) : 1022 - 1032
  • [22] Effects of enamel surface preparation on bonding strength of resin-modified glass ionomer cement: an in vitro study
    Fan, Xiao-Chuan
    Chen, Li
    JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2017, 31 (21) : 2300 - 2311
  • [23] Comparison of the Micro-Shear Bond Strength of Resin Cements to CAD/CAM Glass Ceramics with Various Surface Treatments
    Saglam, Gaye
    Cengiz, Seda
    Koroglu, Aysegul
    Sahin, Onur
    Velioglu, Neslin
    MATERIALS, 2023, 16 (07)
  • [24] Microtensile Bond Strength Between Resin-Matrix CAD/CAM Ceramics and Resin Cement after Various Surface Modifications and Artificial Aging
    Papadopoulos, Constantinos
    Dionysopoulos, Dimitrios
    Pahinis, Kimon
    Koulaouzidou, Elisabeth
    Tolidis, Kosmas
    JOURNAL OF ADHESIVE DENTISTRY, 2021, 23 (03): : 255 - 265
  • [25] Recycling CAD/CAM Lithium Disilicate Ceramic: Effect of Surface Treatment and Aging on the Bond Strength to Resin Cement
    de Miranda, Larissa Mendonca
    Caldas, Aparecida TharIla Leite
    Moura, Dayanne Monielle Duarte
    Souza, Karina Barbosa
    de Assuncao, Isauremi Vieira
    Ozcan, Mutlu
    de Assuncao e Souza, Rodrigo Othavio
    INTERNATIONAL JOURNAL OF PROSTHODONTICS, 2024, 37 (06) : 675 - 685
  • [26] The impact of various surface treatments and Er-YAG laser irradiation on the bond strength of resin matrix CAD/CAM ceramics to resin cement
    İlknur Usta Kutlu
    Kaan Yerliyurt
    Lasers in Medical Science, 40 (1)
  • [27] Combination of a silane coupling agent and resin primer reinforces bonding effectiveness to a CAD/CAM indirect resin composite block
    Hagino, Ryosuke
    Mine, Atsushi
    Matsumoto, Mariko
    Yumitate, Masahiro
    Ban, Shintaro
    Yamanaka, Azusa
    Ishida, Masaya
    Miura, Jiro
    Van Meerbeek, Bart
    Yatani, Hirofumi
    DENTAL MATERIALS JOURNAL, 2021, 40 (06) : 1445 - 1452
  • [28] The application of the Er,Cr:YSGG laser surface treatment to CAD/CAM resin ceramic blocks to improve their bonding to the resin luting agent
    Chuenjit P.
    Shinkai K.
    Lasers in Dental Science, 2021, 5 (1) : 9 - 17
  • [29] Impact of diamond tool wear on the surface finish of lithium silicate glass ceramics machined with the assistance of CAD/CAM systems
    Simba, Bruno Galvao
    Alves, Manuel Fellipe Rodrigues Pais
    Villela, Tales Ferreira
    Ribeiro, Marcos Valerio
    Strecker, Kurt
    dos Santos, Claudinei
    JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2023, 45 (01)
  • [30] Impact of diamond tool wear on the surface finish of lithium silicate glass ceramics machined with the assistance of CAD/CAM systems
    Bruno Galvão Simba
    Manuel Fellipe Rodrigues Pais Alves
    Tales Ferreira Villela
    Marcos Valério Ribeiro
    Kurt Strecker
    Claudinei dos Santos
    Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2023, 45
12345