Optical properties of GAZO thin films deposited by RF planar magnetron sputtering at various O2/Ar flow ratios

被引:3
|
作者
Muchuweni, E. [1 ,2 ]
Sathiaraj, T. S. [1 ]
Nyakotyo, H. [1 ,2 ]
机构
[1] BIUST, Dept Phys & Astron, P Bag 16, Palapye, Botswana
[2] BUSE, Dept Phys & Math, P Bag 1020, Bindura, Zimbabwe
来源
关键词
Optical properties; Surface morphology; Oxygen admittance; ZnO; GAZO; Thin films; ELECTRICAL-PROPERTIES; PHYSICAL-PROPERTIES; ZNO NANORODS; ITO FILMS; CONSTANTS; GALLIUM; GROWTH; OXYGEN; LAYERS;
D O I
10.1016/j.optlastec.2018.09.032
中图分类号
O43 [光学];
学科分类号
070207 ; 0803 ;
摘要
The present study investigates the effect of oxygen admittance on the surface morphology and optical constants of gallium (Ga) and aluminium (Al) co-doped zinc oxide (GAZO) thin films deposited on glass substrates by radio frequency (RF) planar magnetron sputtering. The GAZO thin films were uniformly covered with almost spherical grains of mean diameter around 50-100 run. In the visible region, the refractive index (n) exhibited a decreasing trend with increasing oxygen admittance and the extinction coefficient (k) was almost zero, corroborating the observed increase in transmittance with oxygen/argon (O-2/Ar) flow ratio. Optical constants such as the Wemple and Didomenico (WDD) single oscillator dispersion energies (E-o and E-d), static refractive index (n(0)), dielectric constant (epsilon), plasma frequency (omega(p)) and free carrier concentration (N-c) were determined. Desirable surface morphology and optical properties were observed on the GAZO thin films deposited at an O-2/Ar flow ratio of 0.667, indicating their suitability for optoelectronic device fabrication.
引用
收藏
页码:25 / 29
页数:5
相关论文
共 50 条
  • [2] Deposition of NiVOx thin films by pulse magnetron sputtering with various Ar/O2 ratios
    Weng, Ko-Wei
    Lin, Tai-Nan
    Huang, Jung-Jie
    Huang, Yu-Pei
    THIN SOLID FILMS, 2013, 529 : 62 - 65
  • [3] Optical characterization of BCN films deposited at various N2/Ar gas flow ratios by RF magnetron sputtering
    Todi, Vinit O.
    Shantheyanda, Bojanna P.
    Todi, Ravi M.
    Sundaram, Kalpathy B.
    Coffey, Kevin
    MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 2011, 176 (12): : 878 - 882
  • [4] Structural Characterization of Zinc Oxide Thin Films Deposited at Various O2/Ar Flow Ratio in Magnetron Sputtering Plasma
    Nayan, Nafarizal
    Shuhana, C. T.
    Ahmad, Riyaz
    Sahdan, Mohd Zainizan
    Ahmad, Mohd Khairul
    Fhong, Soon Chin
    Saim, Hashim
    Zain, Ahmad Faizal Mohd
    Zakaria, Ammar
    SHakaff, Ali Yeon Md
    2013 IEEE REGIONAL SYMPOSIUM ON MICRO AND NANOELECTRONICS (RSM 2013), 2013, : 208 - 210
  • [5] ELECTRICAL CONDUCTING AND MECHANISM OF OXYGEN-DEFICIENT TIN OXIDE FILMS DEPOSITED BY RF MAGNETRON SPUTTERING AT VARIOUS O2/Ar RATIOS
    Wang, Qi
    Wang, Chengbiao
    Lv, Changchun
    Wang, Yang
    Peng, Zhijian
    Fu, Xiuli
    SURFACE REVIEW AND LETTERS, 2018, 25 (04)
  • [6] Optical properties of fluoride thin films deposited by RF magnetron sputtering
    Iwahori, Koichiro
    Furuta, Masahiro
    Taki, Yusuke
    Yamamura, Tomoyuki
    Tanaka, Akira
    APPLIED OPTICS, 2006, 45 (19) : 4598 - 4602
  • [7] Effect of O2 flow rate on the characteristics of ZnO thin films deposited by RF reactive magnetron sputtering
    Kamble, Sudhir S.
    Radhakrishnan, J. K.
    Krishnamoorthy, Rajavel
    MATERIALS TECHNOLOGY, 2018, 33 (11) : 709 - 715
  • [8] Effects of the O2/Ar gas flow ratio on the electrical and transmittance properties of ZnO:Al films deposited by RF magnetron sputtering
    Yim, Keunbin
    Kim, Hyounwoo
    Lee, Chongmu
    JOURNAL OF ELECTROCERAMICS, 2006, 17 (2-4) : 875 - 877
  • [9] Effects of the O2/Ar gas flow ratio on the electrical and transmittance properties of ZnO:Al films deposited by RF magnetron sputtering
    Keunbin Yim
    Hyounwoo Kim
    Chongmu Lee
    Journal of Electroceramics, 2006, 17 : 875 - 877
  • [10] Piezoelectric and optical properties of ZnO thin films deposited using various O2/(Ar+O2) gas ratios
    Seong Jun Kang
    Yang Hee Joung
    Dong Hoon Chang
    Kyoung Won Kim
    Journal of Materials Science: Materials in Electronics, 2007, 18 : 647 - 653