Design of parts processing and control system based on PLC

被引：0
|
作者：
Kuang Xinghong [1 ]
Yao ZheYi [1 ]
Wang Shiming [1 ]
机构：
[1] Shanghai Ocean Univ, Dept Automat, Shanghai 201306, Peoples R China
来源：
MATERIAL SCIENCE, CIVIL ENGINEERING AND ARCHITECTURE SCIENCE, MECHANICAL ENGINEERING AND MANUFACTURING TECHNOLOGY II | 2014年 / 651-653卷
关键词：
Siemens S7-200 PLC; parts processing; program; control;
D O I：
10.4028/www.scientific.net/AMM.651-653.703
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
This article focuses on the design of parts processing and control system based on Siemens S7-200 PLC. The purpose of this study is to learn and become familiar with the Siemens S7-200PLC hardware parameters and the use of programming software STEP 7 Micro/WIN SP9, and design a rational and effective parts processing and control system. This paper firstly describes the development history and development status of the PLC, so that readers can understand the PLC briefly. Secondly, the article shows some important technical parameters such as Siemens S7-200PLC CPU model, hardware configuration and so on. It is to clarify the basic component of parts processing and control system and its working principle, and the role of Siemens PLC in the system. Finally, according to specific design requirements, programming software STEP 7 Micro/WIN SP9 is used to program for the system so that the system can operate effectively and reasonably. The study successfully achieved the desired goals, through reasonable programming made PLC take the full control of parts processing in this system..
引用
收藏
页码：703 / 705
页数：3
相关论文
共 50 条
  • [1] Distributed Control System Design for Sorting Parts System Based on PC and PLC
    Zhang, Chuan Lian
    Huang, Dazhi
    Zhou, Qinggui
    Chong, Kil To
    [J]. ADVANCED SCIENCE LETTERS, 2015, 21 (12) : 3672 - 3676
  • [2] Design of the Production Line Control System of Drilling and Milling Processing based on PLC
    Wang, Guo Yu
    Chu, Jian
    [J]. MANUFACTURING, DESIGN SCIENCE AND INFORMATION ENGINEERING, VOLS I AND II, 2015, : 69 - 74
  • [3] Design of Control System for Warehouse based on PLC
    Lv, Chao
    Wang, Jiaan
    Deng, Tianyuan
    [J]. PROCEEDINGS OF 2018 IEEE 4TH INFORMATION TECHNOLOGY AND MECHATRONICS ENGINEERING CONFERENCE (ITOEC 2018), 2018, : 711 - 714
  • [4] Design of Control System of Manipulator based on PLC
    Chen, Xinya
    Chen, Zhen
    [J]. PROCEEDINGS OF THE 2016 INTERNATIONAL CONFERENCE ON EDUCATION, MANAGEMENT, COMPUTER AND SOCIETY, 2016, 37 : 1830 - 1833
  • [5] Design of Brick Machine Control System Based on PLC
    Ye, Hanmin
    Sun, Qianting
    Lu, Shiqin
    Liu, Xiaofei
    [J]. CURRENT DEVELOPMENT OF MECHANICAL ENGINEERING AND ENERGY, PTS 1 AND 2, 2014, 494-495 : 1350 - 1353
  • [6] Research on Design of Temperature Control System based on PLC
    Zhou Ying
    [J]. PROCEEDINGS OF THE 2ND INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING AND INDUSTRIAL INFORMATICS (AMEII 2016), 2016, 73 : 263 - 266
  • [7] Design and Practice of an Elevator Control System Based on PLC
    Yang, Xiaoling
    Zhu, Qunxiong
    Xu, Hong
    [J]. 2008 WORKSHOP ON POWER ELECTRONICS AND INTELLIGENT TRANSPORTATION SYSTEM, PROCEEDINGS, 2008, : 94 - 99
  • [8] The Design of Control System for Motion Platform based PLC
    Wei, Yanhong
    Xu, Chang
    Wang, Guirong
    Li, Yuntang
    [J]. INTELLIGENT MATERIALS AND MECHATRONICS, 2014, 464 : 222 - 228
  • [9] Design and Research on Automatic Control System Based on PLC
    Zhai, Qiong
    Li, Yan
    [J]. MATERIALS SCIENCE, MECHANICAL ENGINEERING AND APPLIED RESEARCH, 2014, 628 : 253 - 256
  • [10] Design of Loading Robot Control System Based On PLC
    Han Yi-lun
    Jiao Zhen-guang
    Tian Yan-fang
    Yan Hai-jing
    Cui Yun-long
    [J]. MACHINERY ELECTRONICS AND CONTROL ENGINEERING III, 2014, 441 : 792 - 795
12345