Ni-coated Si3N4 composite powders were prepared successfully via electroless plating by using sodium hypophosphate (NaH2PO2) as reducing agent. The Ni coating layers contained 12 wt.% phosphor and were dominantly amorphous with a thickness of 20-60 nm. The sintering properties of Ni-Si3N4 composite were improved by adding Mo2C into Si3N4 powders, in which Mo2C formed liquid to improve the alpha-beta transformation of Si3N4, and MoSi2 converted into MoSi2 after sintering. The composite powders were densified by hot-pressing at 1600 degrees C. The final crystal phases of the sintered samples were Si3N4, Ni and MOSi2. (c) 2004 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
机构:
School of Materials Science and Engineering, Beifang University of NationalitiesSchool of Materials Science and Engineering, Beifang University of Nationalities
Yong Jiang
Lan-Er Wu
论文数: 0引用数: 0
h-index: 0
机构:
School of Materials Science and Engineering, Beifang University of NationalitiesSchool of Materials Science and Engineering, Beifang University of Nationalities
Lan-Er Wu
Wen-Zhou Sun
论文数: 0引用数: 0
h-index: 0
机构:
School of Materials Science and Engineering, Beifang University of NationalitiesSchool of Materials Science and Engineering, Beifang University of Nationalities
机构:
WESTINGHOUSE RES LABS,MET & MET PROC DEPT,MAT SCI SECT,PITTSBURGH,PA 15260WESTINGHOUSE RES LABS,MET & MET PROC DEPT,MAT SCI SECT,PITTSBURGH,PA 15260
TERWILLIGER, GR
LANGE, FF
论文数: 0引用数: 0
h-index: 0
机构:
WESTINGHOUSE RES LABS,MET & MET PROC DEPT,MAT SCI SECT,PITTSBURGH,PA 15260WESTINGHOUSE RES LABS,MET & MET PROC DEPT,MAT SCI SECT,PITTSBURGH,PA 15260