The design and study of a reciprocating helium compressor

被引：0
|
作者：
Lei, G. [1 ]
Gong, L-H. [1 ]
Lu, W-H. [1 ]
Zhang, L. [1 ]
机构：
[1] Chinese Acad Sci, Techn Inst Phys & Chem, Beijing 100080, Peoples R China
来源：
ICEC 20: PROCEEDINGS OF THE TWENTIETH INTERNATIONAL CRYOGENIC ENGINEERING CONFERENCE | 2005年
关键词：
D O I：
暂无
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
This paper discusses the possibility and the performance of a helium compressor modified from a commercial air conditioning, reciprocating compressor. Modifications to the compressor include an oil injection system and new type lubricant. The exhaust helium temperature will be much higher than that allowed if we just operate this compressor without any modifications. Hence a new cooling method has been developed to intensify the heat exchange of the helium gas in the cylinder with the lubricant oil so an acceptable lower discharge temperature can be obtained. A temperature reduction of more than 70 degrees C was achieved in the experiments.
引用
收藏
页码：487 / 490
页数：4
相关论文
共 50 条
  • [21] Virtual Prototyping technique applied to the design of a process reciprocating compressor
    Traversari, Riccardo
    Rossi, Alessandro
    Faretra, Marco
    PROCEEDINGS OF THE ASME WORLD CONFERENCE ON INNOVATIVE VIRTUAL REALITY - 2011, 2011, : 243 - +
  • [22] 'Performance study of a prototype reciprocating piston compressor with special attention to valve design and gas pulsation'
    Kim, J.
    Soedel, W.
    Proceedings of the 1990 International Compressor Engineering Conference, 1990,
  • [23] 'Performance study of a prototype reciprocating piston compressor with special attention to valve design and gas pulsation'
    Kim, J.
    Soedel, W.
    Proceedings of the 1990 International Compressor Engineering Conference, 1990,
  • [24] Design considerations for an engine-integral reciprocating natural gas compressor
    Malakoutirad, Mohammad
    Bradley, Thomas H.
    Hagen, Chris
    APPLIED ENERGY, 2015, 156 : 129 - 137
  • [25] A Rotor Design of a BLDC motor used for Reciprocating Compressor Considering Demagnetization
    You, Yong-Min
    Kwon, Byung-Il
    Kim, Dae-Kyung
    Han, Man-Seung
    APPLIED ELECTROMAGNETICS AND MECHANICS (II), 2009, 13 : 257 - +
  • [26] A rotor design of a BLDC motor used for reciprocating compressor considering demagnetization
    You, Yong-Min
    Kim, Dae-Kyong
    Kwon, Byung-Il
    INTERNATIONAL JOURNAL OF APPLIED ELECTROMAGNETICS AND MECHANICS, 2010, 33 (1-2) : 689 - 695
  • [27] RELIABILITY SENSITIVITY ANALYSIS AND PARAMETRIC DESIGN ON CONNECTING ROD OF RECIPROCATING COMPRESSOR
    Chen, Pengfei
    Sun, Zhili
    15TH ISSAT INTERNATIONAL CONFERENCE ON RELIABILITY AND QUALITY IN DESIGN, PROCEEDINGS, 2009, : 437 - 441
  • [28] Transversal waves in a reciprocating compressor
    Steinrueck, H.
    Aigner, R.
    Machu, G.
    ACTA MECHANICA, 2008, 201 (1-4) : 231 - 247
  • [29] Fluid mechanics of a reciprocating compressor
    Prasad, BGS
    INTERNATIONAL CONFERENCE ON COMPRESSORS AND THEIR SYSTEMS, 1999, 1999 (06): : 193 - 202
  • [30] LIQUID SLUGGING IN RECIPROCATING COMPRESSOR
    Tuhovcali, Jan
    Murakami, Eric
    Bossanyi, Jan
    COMPRESSORS 2021 - 10TH IIR CONFERENCE ON COMPRESSORS AND REFRIGERANTS, 2021,
12345