Tensile properties of epoxy resin filled with activated carbon derived from coconut shell

被引：8

作者：

Chandra, Timothy Owen ^{[1
]}

Sentanu, Divlan Audie ^{[1
]}

Gornes, Wincent ^{[1
]}

Sentanuhady, Jayan ^{[1
]}

Setiawan, Angga ^{[2
]}

Santos, Gil Nonato ^{[3
]}

Muflikhun, Muhammad Akhsin ^{[1
]}

机构：

[1] Gadjah Mada Univ, Fac Engn, Dept Mech & Ind Engn, Jl Grafika 2, Yogyakarta 55281, Indonesia

[2] Gadjah Mada Univ, Fac Engn, Dept Civil & Environm Engn, Jl Grafika 2, Yogyakarta 55281, Indonesia

[3] Salle Univ, Phys Dept, 2401 Taft Ave, Manila 1004, Philippines

来源：

MATERIALS TODAY-PROCEEDINGS | 2022年 / 66卷

关键词：

Activated carbon; Epoxy resin; Tensile strength; MECHANICAL-PROPERTIES; COMPOSITES;

D O I：

10.1016/j.matpr.2022.06.568

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Epoxy is one of the most widely used polymers. The aim of this research is to determine the potential of activated carbon derived from coconut shells as fillers in epoxy resin. 5 wt% of this filler was added to epoxy resin. The entire specimens were manufactured using a mold made out of aluminum strips with dumbbell shape according to ASTM D638 standard. Tensile properties of epoxy resin with and without filler were analyzed to observe the effect of activated carbon. The results showed that the addition of 5 wt% of activated carbon can decrease the tensile strength of epoxy resin, meanwhile increasing its elas-tic modulus.Copyright (c) 2022 Elsevier Ltd. All rights reserved.Selection and peer-review under responsibility of the 14th AUN/SEED-Net Regional Conference on Mate-rials and 4th International Postgraduate Conference on Materials, Minerals and Polymer (RCM & MAMIP 2021).

引用

页码：2967 / 2971

页数：5

共 50 条

[21] INFLUENCES AND PROPERTIES of VARIOUS ACTIVATED CARBON AND CARBON BLACK FILLED IN EPOXY COMPOSITE
Firoozian, P.
Khalil, H. P. S. Abdul
Akil, Hazizan Md
Noor, Ahmad Md
ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES II, PTS 1 AND 2, 2011, 264-265 : 513 - +
[22] Adsorption of Cr(VI) ions on the activated carbon derived from oxalic acid treated coconut shell
Jin, Xiao-yue
Chen, Pei-yun
Dou, Xin-wei
Wang, Xin-ning
Long, Xiang-li
INTERNATIONAL JOURNAL OF ENVIRONMENTAL ANALYTICAL CHEMISTRY, 2023, 103 (19) : 8266 - 8280
[23] Percolation in carbon black filled epoxy resin
Schueler, R
Petermann, J
Schulte, K
Wentzel, HP
MACROMOLECULAR SYMPOSIA, 1996, 104 : 261 - 268
[24] Sustainable activated carbon derived from coconut shell and betel nuts for energy storage and environmental remediation
Haider, Rakib
Sagadevan, Suresh
Al-Adaileh, Neda'a
Fatimah, Is
Paiman, Suriati
Le, Minh-Vien
Johan, Mohd Rafie
DIAMOND AND RELATED MATERIALS, 2025, 154
[25] Dynamic Mechanical Properties of Activated Carbon-Filled Epoxy Nanocomposites
Khalil, H. P. S. Abdul
Jawaid, M.
Firoozian, P.
Zainudin, E. S.
Paridah, M. T.
INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION, 2013, 18 (04) : 247 - 256
[26] Preparation of activated carbon filled epoxy nanocomposites Morphological and thermal properties
Khalil, H. P. S. Abdul
Firoozian, P.
Jawaid, M.
Akil, H. M.
Hassan, A.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2013, 113 (02) : 623 - 631
[27] Comparison on pore development of activated carbon produced from palm shell and coconut shell
Daud, WMAW
Ali, WSW
BIORESOURCE TECHNOLOGY, 2004, 93 (01) : 63 - 69
[28] Bisphenol A Epoxy Resin-Derived Activated Carbon with High Performance for Supercapacitors
Zhao, Chunhua
Chen, Shi
Sun, Nan
Jiang, Wenbin
Cai, Wenlei
Zhao, Chongjun
JOURNAL OF PHYSICAL CHEMISTRY C, 2023, 127 (38): : 18821 - 18831
[29] MONOLITHS OF ACTIVATED CARBON FROM COCONUT SHELL AND IMPREGNATION WITH NICKEL AND COPPER
Giraldo, Lilian
Moreno-Pirajan, Juan C.
REVISTA COLOMBIANA DE QUIMICA, 2008, 37 (03): : 355 - 370
[30] FRICTION AND WEAR PROPERTIES OF EPOXY RESIN FILLED WITH LAYERED CARBON POWDERS.
Tanaka, Katsutoshi
Yamaguchi, Muneaki
Hori, Shoji
Tanaka, Toshimitsu
Takahashi, Takako
Zairyo/Journal of the Society of Materials Science, Japan, 1988, 37 (413) : 216 - 222

← 1 2 3 4 5 →