Position and Force Control of the CAPAMAN 2 bis Parallel Robot for Drilling Tasks

被引：7
|
作者：
Briones, J. Antonio [1 ]
Castillo, Eduardo [1 ]
Carbone, Giuseppe [2 ]
Ceccarelli, Marco [2 ]
机构：
[1] Inst Politecn Nacl, Unidad Queretaro, CICATA, Queretaro, Mexico
[2] Univ Cassino, DiMSAT, LARM, Cassino, Italy
来源：
CERMA: 2009 ELECTRONICS ROBOTICS AND AUTOMOTIVE MECHANICS CONFERENCE | 2009年
关键词：
Parallel robot; force control; robotic drilling; MANIPULATOR;
D O I：
10.1109/CERMA.2009.40
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
A proposal for position and force control in drilling tasks is presented on this work. Force feedback is done in a simple way with a load cell. Force control algorithm is implemented in 3 degrees of freedom (DOF) parallel robot, the CAPAMAN 2 Bis, developed by the Laboratory of Robotics and Mechatronics at the University of Cassino in Italy. A graphical interface and control software were developed in LabVIEW. The results of this work shows good behavior of the system in close loop with the proposed control algorithm. During a drilling test in wood, the behavior of the hybrid system serial-parallel is acceptable when penetration rates are low.
引用
收藏
页码：181 / +
页数：2
相关论文
共 50 条
  • [1] Parallel Force-Position Control Mediated by Tactile Maps for Robot Contact Tasks
    Denei, Simone
    Mastrogiovanni, Fulvio
    Cannata, Giorgio
    2012 IEEE/RSJ INTERNATIONAL CONFERENCE ON INTELLIGENT ROBOTS AND SYSTEMS (IROS), 2012, : 3786 - 3791
  • [2] Parallel Force/Position Control of an Epicardial Parallel Wire Robot
    Costanza, Adam D.
    Breault, Macauley S.
    Wood, Nathan A.
    Passineau, Michael J.
    Moraca, Robert J.
    Riviere, Cameron N.
    IEEE ROBOTICS AND AUTOMATION LETTERS, 2016, 1 (02) : 1186 - 1191
  • [3] Intelligent strategy of force & position parallel control for a robot
    Yin, YH
    Zhu, JY
    Wei, ZX
    CIRP ANNALS 1997 MANUFACTURING TECHNOLOGY, VOLUME 46/1/1997: ANNALS OF THE INTERNATIONAL INSTITUTION FOR PRODUCTION ENGINEERING RESEARCH, 1997, 46 : 279 - 282
  • [4] FORCE-POSITION HYBRID CONTROL OF A NEW PARALLEL HEXAPOD ROBOT FOR DRILLING HOLES ON FUSELAGE SURFACE
    Zhao, Xianchao
    Pan, Yang
    Gao, Feng
    PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, 2013, VOL 6B, 2014,
  • [5] Dynamic Hybrid Position/Force Control for Parallel Robot Manipulators
    Deng, Wenbin
    Lee, Hyuk-Jin
    Lee, Jeh-Won
    ROMANSY 18: ROBOT DESIGN, DYNAMICS AND CONTROL, 2010, (524): : 57 - 64
  • [6] Robust position/force control of robot manipulators during constrained tasks
    Song, G
    Cai, L
    IEE PROCEEDINGS-CONTROL THEORY AND APPLICATIONS, 1998, 145 (04): : 427 - 433
  • [7] A vision/position/force control approach for performing assembly tasks with a humanoid robot
    Dauchez, P
    Fraisse, P
    Pierrot, F
    2005 5TH IEEE-RAS INTERNATIONAL CONFERENCE ON HUMANOID ROBOTS, 2005, : 277 - 282
  • [8] ROBUST-CONTROL OF POSITION AND FORCE FOR A ROBOT MANIPULATOR IN NONCONTACT AND CONTACT TASKS
    CAI, L
    GOLDENBERG, AA
    PROCEEDINGS OF THE 1989 AMERICAN CONTROL CONFERENCE, VOLS 1-3, 1989, : 1905 - 1911
  • [9] Kinematic and deformation analyses of a translational parallel robot for drilling tasks
    R. Maldonado-Echegoyen
    E. Castillo-Castaneda
    M. A. Garcia-Murillo
    Journal of Mechanical Science and Technology, 2015, 29 : 4437 - 4443
  • [10] Kinematic and deformation analyses of a translational parallel robot for drilling tasks
    Maldonado-Echegoyen, R.
    Castillo-Castaneda, E.
    Garcia-Murillo, M. A.
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2015, 29 (10) : 4437 - 4443
12345