Development Status of a Planer Type of 1 kW Class SOFC System

被引：8

作者：

Shimano, J. ^{[1
]}

Yamazaki, H. ^{[1
]}

Mizutani, Y. ^{[1
]}

Hisada, K. ^{[1
]}

Ukai, K. ^{[1
]}

Yokoyama, M. ^{[1
]}

Nagai, K. ^{[1
]}

Kashima, S. ^{[2
]}

Orishima, H. ^{[2
]}

Nakatuka, S. ^{[2
]}

Uwani, H. ^{[2
]}

Hirakawa, M. ^{[2
]}

机构：

[1] Toho Gas Co Ltd, Fundamental Res Dept, 507-2 Shinpo Machi, Tokai, Aichi 4768501, Japan

[2] Sumitomo Precis Prod Co, Business Initiat & Res, Amagasaki, Hyogo 6600891, Japan

来源：

SOLID OXIDE FUEL CELLS 10 (SOFC-X), PTS 1 AND 2 | 2007年 / 7卷 / 01期

关键词：

D O I：

10.1149/1.2729083

中图分类号：

O646 [电化学、电解、磁化学];

学科分类号：

081704 ;

摘要：

Tobo Gas Co., Ltd. and Sumitomo Precision Products Co., Ltd. have been jointly developing a SOFC system using scandia stabilized zirconia electrolyte cells. In addition to our previous two models of 1 kW class SOFC systems (alpha and beta-models), the third generation 1 kW class SOFC system (gamma-model) has been developed; this has the steam reformer integrated with cell stack and the burner for starting up. Firstly, it was confirmed that the steam reformer operated successfully compared the results of the gas analysis with the equilibrium calculation. Next, the electrical power output of 1180 W was achieved at a fuel utilization of 73 % and the electrical efficiency of 53% (DC, LHV) was obtained. Moreover, it was concluded that the thermal design of the hot module was important to achieve highly efficient SOFC system from the evaluation of heat balance.

引用

页码：141 / +

页数：2

共 50 条

[1] Development of 1 kW Class SOFC System at KIEPRI
Lee, Taehee
Park, Jae-Keun
Oh, Je-Myung
Yoo, Young-Sung
Bae, Joongmyeon
Park, Jin-Woo
Kim, Jung Han
[J]. SOLID OXIDE FUEL CELLS 10 (SOFC-X), PTS 1 AND 2, 2007, 7 (01): : 199 - 204
[2] DEVELOPMENT OF kW CLASS PLANAR TYPE SOFC STACKS AND A 5kW CLASS COGENERATION SYSTEM
Lee, Taehee
Choi, Jin Hyeok
Choi, Mi-hwa
Yoo, Young-Sung
[J]. PROCEEDINGS OF THE ASME 8TH INTERNATIONAL CONFERENCE ON FUEL CELL SCIENCE, ENGINEERING, AND TECHNOLOGY 2010, VOL 1, 2010, : 333 - 336
[3] Development of 5kW class MOLB type SOFC
Sakaki, Y
Esaki, Y
Hattori, M
Miyamoto, H
Satake, T
Nanjo, F
Matsudaira, T
Takenobu, K
[J]. PROCEEDINGS OF THE FIFTH INTERNATIONAL SYMPOSIUM ON SOLID OXIDE FUEL CELLS (SOFC-V), 1997, 97 (40): : 61 - 68
[4] Development of 25 kW Class SOFC Module
Ikeda, Koji
Hisatome, Nagao
Nagata, Katsumi
Tsukamoto, Daisuke
Kawaguchi, Yutaka
Kosaka, Kenichiro
Matake, Norihisa
Sasatsu, Hiroshi
Takahashi, Yasuhiro
Konishi, Kinhei
[J]. SOLID OXIDE FUEL CELLS 10 (SOFC-X), PTS 1 AND 2, 2007, 7 (01): : 39 - +
[5] Towards the development of a 25 kW planar SOFC system
Bolden, R
Föger, K
Pham, T
[J]. SOLID OXIDE FUEL CELLS (SOFC VI), 1999, 99 (19): : 80 - 87
[6] Fabrication and Demonstration of 1 kW Class SOFC Stack and System for Residential Power Generation Application
Yoo, Young-Sung
Lee, Taehee
Choi, Jin Hyeok
Park, Tae-Sung
Oh, Je-Myung
Kim, Chong-Young
[J]. JOURNAL OF FUEL CELL SCIENCE AND TECHNOLOGY, 2009, 6 (02): : 0210081 - 0210085
[7] Verification test of a 25kW class SOFC cogeneration system
Yokoyama, H
Miyahara, A
Veyo, SE
[J]. PROCEEDINGS OF THE FIFTH INTERNATIONAL SYMPOSIUM ON SOLID OXIDE FUEL CELLS (SOFC-V), 1997, 97 (40): : 94 - 103
[8] Development of kW Class SOFC Stack and System for Solid Oxide Fuel Cell Operating at Intermediate Temperature
Yoo, Young-Sung
Lee, Taehee
Choi, Jin Hyeok
[J]. SOLID OXIDE FUEL CELLS 11 (SOFC-XI), 2009, 25 (02): : 167 - 174
[9] Development of kW Class SOFC Systems for Combined Heat and Power Units at KEPRI
Lee, Taehee
Choi, Jin Hyeok
Park, Tae-Sung
Yoo, Keun-Bae
Yoo, Young-Sung
[J]. JOURNAL OF THE KOREAN CERAMIC SOCIETY, 2008, 45 (12) : 772 - 776
[10] Development of Several kW SOFC System using Segmented-cells
Amaha, Shinji
Sobue, Tsutomu
Seyama, Takehiro
[J]. FUEL CELL SEMINAR 2007, 2008, 12 (01): : 401 - +

← 1 2 3 4 5 →