Casting of clad strip by an unequal diameter twin roll caster

被引：5

作者：

Haga, T. ^{[1
]}

Sawai, M. ^{[1
]}

Nakamura, R. ^{[1
]}

Watari, H. ^{[2
]}

Kumai, S. ^{[3
]}

机构：

[1] Osaka Inst Technol, Asahi Ku, 5-16-1 Omiya, Osaka 5358585, Japan

[2] Tokyo Inst Technol, Yokohama, Kanagawa 2268502, Japan

[3] Gunma Univ, Tenjin Kiryu 3768515, Japan

来源：

THERMEC 2009, PTS 1-4 | 2010年 / 638-642卷

关键词：

twin roll caster; clad strip; strip casting; aluminum alloy;

D O I：

10.4028/www.scientific.net/MSF.638-642.413

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

An unequal diameter twin roll caster which can cast clad strips was devised and assembled The casting of the clad strip was tried, and fabrication of the clad strip was attained This twin roll caster was planned for the process saving. The clad strip was assembled directly from AA3003 molten metal and AA4045 molten metal at speed of 20m/min. The Si-diffusion-area between the strips was very narrow, and the interface between the strips was clear. The strips were bonded firmly. The strips were not pealed by the cold rolling and the continuous bending.

引用

页码：413 / +

页数：2

共 50 条

[21] The influence of caster roll diameter on the microstructure of twin roll cast aluminum strip
Dündar, M
Akkurt, AS
Sarioglu, K
Romanowski, C
LIGHT METALS 2003, 2003, : 719 - 724
[22] Melt ejection twin roll caster for the strip casting of aluminum alloy
Haga, T
Suzuki, S
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2003, 137 (1-3) : 92 - 95
[23] Semisolid strip casting using a vertical type twin roll caster
Haga, T
Takahashi, K
Watari, H
THERMEC'2003, PTS 1-5, 2003, 426-4 : 477 - 482
[24] A vertical type tandem twin roll caster for clad strip equipped with a scraper
Haga, Toshio
Tsuge, Hiroshi
Ishihara, Takuya
Kumai, Shinji
Watari, Hisaki
MATERIAL FORMING ESAFORM 2014, 2014, 611-612 : 623 - 628
[25] Roll Casting of Clad Strip
Haga, Toshio
Nakamura, Ryoji
Kumai, Shinji
Watari, Hisaki
THERMEC 2011, PTS 1-4, 2012, 706-709 : 1152 - +
[26] Production of Clad Steel Strips by Twin-Roll Strip Casting
Vidoni, Michele
Ackermann, Rebecca
Richter, Silvia
Hirt, Gerhard
ADVANCED ENGINEERING MATERIALS, 2015, 17 (11) : 1588 - 1597
[27] Semisolid strip casting using a twin roll caster equipped with a cooling slope
Haga, T
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2002, 130 : 558 - 561
[28] Physical modelling of liquid feeding for an unequal diameter two roll thin strip caster
Sen, N
Sau, R
Mazumdar, S
Ghosh, M
Sahay, SK
Ray, AK
CANADIAN METALLURGICAL QUARTERLY, 1998, 37 (02) : 161 - 166
[29] Inline Hot Rolling of Al-5%Mg Strip Cast Using an Unequal Diameter Twin-Roll Caster
Haga, Toshio
Furukawa, Masataka
MATERIALS, 2024, 17 (14)
[30] Semi-solid roll casting of aluminum alloy strip by melt drag twin roll caster
Haga, T
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2001, 111 (1-3) : 64 - 68

← 1 2 3 4 5 →