Fatigue behaviour of CHS tubular bracings in steel bridges

被引：8
|
作者：
Baptista, Claudio [1 ]
Kannuna, Saad [3 ]
Pedro, Jose Oliveira [1 ,2 ]
Nussbaumer, Alain [3 ]
机构：
[1] GRID Int, Lisbon, Portugal
[2] Univ Lisbon, Inst Super Tecn, ICIST, CEris, Lisbon, Portugal
[3] Ecole Polytech Fed Lausanne, CH-1015 Lausanne, Switzerland
来源：
INTERNATIONAL JOURNAL OF FATIGUE | 2017年 / 96卷
关键词：
Fatigue tests; Tubular connection; Local notch stress method; Steel bridges; PLATE;
D O I：
10.1016/j.ijfatigue.2016.11.007
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The structural solution for cross girder bracings or box girder diaphragms in steel bridges is often made with tubular elements, specially efficient if compression is required for structural behaviour. The connection between the tubular elements and the girder plates is usually made with a gusset welded on a slit in the tube. The weld between the gusset and the tube at the end of the slit is a critical fatigue spot. This paper re-analyses the existing fatigue detailing recommendations and presents the results of fatigue tests carried out on CHS tubes with four different types of detail in the high cycle regime. The results were analysed with a local notch stress approach and compared with previous fatigue tests from literature. Recommendations for fatigue classification and detailing are given. (C) 2016 Elsevier Ltd. All rights reserved.
引用
收藏
页码：127 / 141
页数：15
相关论文
共 50 条
  • [21] FATIGUE-RESISTANT STEEL BRIDGES
    SMITH, IFC
    HIRT, MA
    [J]. JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 1989, 12 (3-4) : 197 - 214
  • [22] Fatigue behaviour of nailed tubular connections
    Kosteski, N
    Packer, JA
    van Wingerde, AM
    [J]. INTERNATIONAL JOURNAL OF OFFSHORE AND POLAR ENGINEERING, 2000, 10 (03) : 209 - 216
  • [23] Fatigue evaluation of steel and concrete bridges
    Szerszen, MM
    Nowak, AS
    [J]. FIFTH INTERNATIONAL BRIDGE ENGINEERING CONFERENCE, VOLS 1 AND 2: BRIDGES, OTHER STRUCTURES, AND HYDRAULICS AND HYDROLOGY, 2000, 1696 : 73 - 80
  • [24] Fatigue reliability of steel girder bridges
    Nowak, AS
    Szerszen, MM
    [J]. STRUCTURAL ENGINEERING IN THE 21ST CENTURY, 1999, : 255 - 258
  • [25] Neutron diffraction investigations on residual stresses contributing to the fatigue crack growth in ferritic steel tubular bridges
    Acevedo, C.
    Evans, A.
    Nussbaumer, A.
    [J]. INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2012, 95 : 31 - 38
  • [26] Design of concrete-filled steel tubular CHS connections in tension
    Chen, J.
    Xu, F.
    Ye, Y.
    Jin, W. L.
    [J]. INSIGHTS AND INNOVATIONS IN STRUCTURAL ENGINEERING, MECHANICS AND COMPUTATION, 2016, : 1276 - 1282
  • [27] Analysis of CFRP externally-reinforced steel CHS tubular beams
    Haedir, J.
    Zhao, X. -L.
    Bambach, M. R.
    Grzebieta, R. H.
    [J]. COMPOSITE STRUCTURES, 2010, 92 (12) : 2992 - 3001
  • [28] Experimental and numerical study on ultra low cycle fatigue fracture of X steel tubular joints with CHS braces to SHS chord
    Huang, Xuewei
    Wei, Chenchen
    Zhou, Jiajia
    Zhao, Jun
    Ge, Jianzhou
    [J]. THIN-WALLED STRUCTURES, 2021, 162
  • [29] Connections of CHS concrete-filled diagonals of X-bracings
    Thomopoulos, K
    Koltsakis, E
    [J]. JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2003, 59 (06) : 665 - 678
  • [30] Thermo-mechanical fatigue behaviour of welded tubular parts made of ferritic stainless steel
    Robin, M. -C.
    Delagnes, D.
    Loge, R.
    Bouchard, P. -O.
    Da Costa, S.
    Monteagudo-Galindo, M.
    Velay, V.
    [J]. INTERNATIONAL JOURNAL OF FATIGUE, 2013, 54 : 84 - 98
12345