Numerical prediction of oil amount leaked from a damaged tank using two-dimensional moving particle simulation method

When an oil-spilling accident occurs at sea, it causes tremendous economic loss, and environmental damages. To minimize these marine disasters, predicting the amount of oil-leaking is one of the most important things for the quick response and decision making in the early stage of the accident. In the present study, numerical investigation on the oil-leaking phenomena from a two-dimensional damaged tank was carried out to predict the amount of the oil leaking from a leakage hole of a rectangular tank by using the PNU-MPS(Pusan-National-University-modified Moving Particle Simulation) method (Lee et al., 2011). As a preliminary test to confirm the accuracy of the PNU-MPS method for the two-phase problem and to investigate the influence of the gradient model, numerical simulations for the Rayleigh-Taylor(R-T) instability were carried out By using an appropriate gradient model and applying a high-order time integration scheme, i.e. 4th-order Runge-Kutta scheme, it was found that the simulation results became closer to the experimental ones (Kim and Lee, 2001), by which the oil-leaking speed and Torricelli's factor relating the speed predicted by using the hydrostatic balance and the real leakage speed were measured and assessed. (C) 2013 Elsevier Ltd. All rights reserved.