Comparison of different abrasion mechanisms on the barrier properties of organic coatings

被引：12

作者：

Reyes-Mercado, Y. ^{[1
,2
]}

Rossi, S. ^{[2
]}

Deflorian, F. ^{[2
]}

Fedel, M. ^{[2
]}

机构：

[1] Univ Nacl Autonoma Mexico, Fac Quim, Mexico City 04510, DF, Mexico

[2] Univ Trent, Dept Mat Engn & Ind Technol, I-38050 Trento, Italy

来源：

WEAR | 2008年 / 265卷 / 11-12期

关键词：

Paint tribology; Taber test; Falling abrasive test; Organic coating;

D O I：

10.1016/j.wear.2008.04.027

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Since the loss of properties of organic coatings due to abrasion is of primary importance in the material performance, the reduction of barrier properties of organic coatings due to abrasion is studied by electrochemical impedance spectroscopy. The damage of organic coatings caused by abrasion impact of different abrasive materials and abrasion as a result of rubbing aggressive agents against the coating surface is analyzed by environmental scanning electron microscopy (ESEM). The falling abrasive test induces a decrease of coating thickness that can be detected by the thickness gauge and capacitance measurements and it is the main responsible of the loss of coating properties. On the other hand, Taber Abraser test creates scratches by which the protection properties are reduced. (C) 2008 Elsevier B.V. All rights reserved.

引用

页码：1820 / 1825

页数：6

共 50 条

[21] Comparison of tribological properties of HVOF sprayed coatings with different composition
Karaoglanli, Abdullah Cahit
Oge, Mecit
Doleker, Kadir Mert
Hotamis, Mert
SURFACE & COATINGS TECHNOLOGY, 2017, 318 : 299 - 308
[22] Organic-inorganic hybrid transparent abrasion coatings for aeronautical transparency
Ha, E.-H. (haenhua@yahoo.com.cn), 2012, Chinese Journal of Aeronautics (32):
[23] Hybrid organic/inorganic coatings for abrasion resistance on plastic and metal substrates
Wen, J
Jordens, K
Wilkes, GL
BETTER CERAMICS THROUGH CHEMISTRY VII: ORGANIC/INORGANIC HYBRID MATERIALS, 1996, 435 : 207 - 213
[24] Finite Element Modeling of the Different Failure Mechanisms of a Plasma Sprayed Thermal Barrier Coatings System
M. Ranjbar-Far
J. Absi
G. Mariaux
Journal of Thermal Spray Technology, 2012, 21 : 1234 - 1244
[25] Finite Element Modeling of the Different Failure Mechanisms of a Plasma Sprayed Thermal Barrier Coatings System
Ranjbar-Far, M.
Absi, J.
Mariaux, G.
JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2012, 21 (06) : 1234 - 1244
[26] On the failure mechanisms of thermal barrier coatings with diffusion aluminide bond coatings
Spitsberg, IT
Mumm, DR
Evans, AG
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 394 (1-2): : 176 - 191
[27] Influence of different colour pigments on the properties of powder deposited organic coatings
Rossi, Stefano
Fedel, Michele
Deflorian, Flavio
Zanol, Stefano
MATERIALS & DESIGN, 2013, 50 : 332 - 341
[28] Modification of organic coatings with thin plasma polymer films. influence on the barrier properties
Serra, R
Zheludkevich, ML
Grundmeier, G
Ferreira, MGS
ADVANCED MATERIALS FORUM III, PTS 1 AND 2, 2006, 514-516 : 1401 - 1405
[29] Influence of shape and particle size distribution of natural fillers on the barrier properties of organic coatings
Zubielewicz, Malgorzata
Kaminska-Tarnawska, Elzbieta
OCHRONA PRZED KOROZJA, 2013, 56 (11): : 494 - 501
[30] Corrosion mechanisms of organic topcoat coatings
Hütser, Peter
Levermann, Verane Possi
Galvanotechnik, 2021, 112 (02): : 155 - 163

← 1 2 3 4 5 →