Creep rupture behavior of Grade 91 steel

被引：97
|
作者：
Shrestha, Triratna [1 ]
Basirat, Mehdi [2 ]
Charit, Indrajit [1 ]
Potirniche, Gabriel P. [2 ]
Rink, Karl K. [2 ]
机构：
[1] Univ Idaho, Dept Chem & Mat Engn, Moscow, ID 83844 USA
[2] Univ Idaho, Dept Mech Engn, Moscow, ID 83844 USA
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2013年 / 565卷
关键词：
Grade; 91; steel; Creep rupture; Fractography; Creep life prediction; Fracture mechanism map; MODIFIED 9CR-1MO STEEL; LONG-TERM CREEP; FRACTURE-MECHANISM MAPS; FERRITIC STEEL; STRUCTURAL-MATERIALS; NUCLEAR-REACTORS; CHROMIUM STEELS; POWER-PLANT; DEFORMATION; STRESS;
D O I：
10.1016/j.msea.2012.12.031
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Grade 91 steel is considered a potential structural material for advanced nuclear reactors. The creep deformation behavior of Grade 91 steel was studied in the temperature range of 600-700 degrees C and at stresses of 35-350 MPa. The data were analyzed in terms of Monkman-Grant relation and Larson-Miller parameter. Creep damage tolerance factor and stress exponent were used to identify the cause of creep damage. The fracture surface morphology of the ruptured specimens was studied by scanning electron microscopy to elucidate the failure mechanisms. Fracture mechanism map for Grade 91 steel was developed based on the available material parameters and experimental observations. (C) 2012 Elsevier B.V. All rights reserved.
引用
收藏
页码：382 / 391
页数：10
相关论文
共 50 条
  • [31] Phase transformation behavior of Grade 91 ferritic steel
    Tokunaga, T.
    Hasegawa, K.
    Masuyama, F.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 510-11 : 158 - 161
  • [32] Microstructure and creep rupture strength of welded joints in the steel P91
    Purmensky, Jaroslav
    Foldyna, Vaclav
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE 2007, VOL 9, 2008, : 503 - 511
  • [33] An interpretation of creep rupture properties of grade 91 steel service- exposed for 100,000 hours at 600 °C
    Maruyama, K.
    Yaguchi, M.
    Minami, Y.
    Tamura, K.
    Yoshimi, K.
    MATERIALS AT HIGH TEMPERATURES, 2022, 39 (01) : 44 - 54
  • [34] Finite Element Modelling of Creep Rupture on Grade 91 Steel using Monkman-Grant Ductility based Damage Model
    Alang, N. A.
    Alias, J.
    Sajuri, Z.
    Atiqah, S. Nur
    INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, 2021, 13 (07): : 108 - 118
  • [35] Correlation of hardness with creep rupture strength, allowable stress and service/remaining life of Grade 91 heat-resistant steel
    Peng Zhi-fang
    Liu Sheng
    Yang Hua-chun
    Yang Chao
    Wang Jia-qing
    CAILIAO GONGCHENG-JOURNAL OF MATERIALS ENGINEERING, 2021, 49 (09): : 109 - 118
  • [36] A Hardness-Normalised Model of Creep Rupture for P91 Steel
    Allen, David J.
    CREEP & FRACTURE IN HIGH TEMPERATURE COMPONENTS: DESIGN & LIFE ASSESSMENT ISSUES, PROCEEDINGS, 2009, : 659 - 668
  • [37] Evaluation of short and long-term creep rupture properties for Grade 91 materials
    Cohn, Marvin J.
    Proceedings of the ASME Pressure Vessels and Piping Conference 2005, Vol 6, 2005, 6 : 411 - 418
  • [38] Effect of prior austenitisation temperature on creep rupture in Grade 22 steel
    von Willingh, S.
    Knutsen, R. D.
    MATERIALS AT HIGH TEMPERATURES, 2022, 39 (06) : 507 - 515
  • [39] Advanced Methods for Assessing the Melt-Specific Creep Rupture Behavior of P91 Steel for Power Plants
    Frolova, Olga
    Maile, Karl
    STEEL RESEARCH INTERNATIONAL, 2013, 84 (10) : 956 - 965
  • [40] Causes of heat-to-heat variation of creep strength in grade 91 steel
    Maruyama, K.
    Nakamura, J.
    Sekido, N.
    Yoshimi, K.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 696 : 104 - 112
12345