Simultaneous improvement of strength and ductility in hypoeutectic Al-Si-Mg and Al-Mg alloys with high contents of Mg

被引：2

作者：

Ha, S. -H ^{[1
]}

Lee, S. -Y ^{[1
]}

Yoon, Y. -O ^{[1
]}

Kim, B. -H ^{[1
]}

Lim, H. -K ^{[1
]}

Kim, S. -K ^{[1
]}

机构：

[1] Korea Inst Ind Technol, 156 Gaetbeol Ro, Incheon 21999, South Korea

来源：

MATERIALS TODAY-PROCEEDINGS | 2019年 / 10卷

关键词：

Al-Si-Mg system; Al-Mg system; Ca; tensile property; Mg2Si; CAO;

D O I：

10.1016/j.matpr.2018.10.413

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Changes of strength and ductility in a hypoeutectic Al-7mass% Si-Mg with increasing Mg content and Al-7.5mass% Mg alloys with increasing Ca content were investigated. The elongation of Al-7.5mass% Mg alloy was improved with increasing Ca content up to 0.1mass% without trade-off with the strength. With increasing Mg and Ca contents simultaneously, the Al-7mass% Si alloys showed the modification of eutectic Si particles. After aging, the alloys had the distribution of residual Mg2Si in their grain boundaries with increasing Mg content over the Mg solubility. Al-7mass% Si-0.8mass% Mg alloy including a small amount of residual Mg2Si showed a significant improvement of strength after the aging. (C) 2018 Elsevier Ltd. All rights reserved.

引用

页码：327 / 331

页数：5

共 50 条

[31] Mg effects on the eutectic structure and tensile properties of Al-Si-Mg alloys
Wang, QG
Caceres, CH
ALUMINIUM ALLOYS: THEIR PHYSICAL AND MECHANICAL PROPERTIES, PART 4/SUPPLEMENT, 1997, 242 : 159 - 164
[32] The effect of Mg on the microstructure and mechanical behavior of Al-Si-Mg casting alloys
Caceres, CH
Davidson, CJ
Griffiths, JR
Wang, QG
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1999, 30 (10): : 2611 - 2618
[33] In Situ Investigations on the Ductility of an Al-Si-Mg Casting Alloy
Doglione, R.
JOM, 2012, 64 (01) : 51 - 57
[34] Effect of Si Addition on Flow Behavior in Al-Mg and Al-Mg-Si Molten Alloys
Abdul Wahid Shah
Seong-Ho Ha
Bong-Hwan Kim
Young-Ok Yoon
Hyun-Kyu Lim
Shae K. Kim
Metallurgical and Materials Transactions A, 2020, 51 : 6670 - 6678
[35] Effect of Si Addition on Flow Behavior in Al-Mg and Al-Mg-Si Molten Alloys
Shah, Abdul Wahid
Ha, Seong-Ho
Kim, Bong-Hwan
Yoon, Young-Ok
Lim, Hyun-Kyu
Kim, Shae K.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2020, 51 (12): : 6670 - 6678
[36] A new approach to achieving high strength and ductility of ultrafine grained commercial Al-Mg alloys
Orlova, Tatiana S.
Sadykov, Dinislam I.
Kirilenko, Demid A.
Levin, Aleksandr A.
MATERIALS TODAY COMMUNICATIONS, 2025, 42
[37] The effect of Mg on the microstructure and mechanical behavior of Al-Si-Mg casting alloys
C. H. Caceres
C. J. Davidson
J. R. Griffiths
Q. G. Wang
Metallurgical and Materials Transactions A, 1999, 30 : 2611 - 2618
[38] The fracture mode in Al-Si-Mg casting alloys
Wang, QG
Caceres, CH
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1998, 241 (1-2): : 72 - 82
[39] INFLUENCE OF THE CHEMICAL COMPOSITION ON ELECTRICAL CONDUCTIVITY AND MECHANICAL PROPERTIES OF THE HYPOEUTECTIC Al-Si-Mg ALLOYS
Dybowski, B.
Szymszal, J.
Poloczek, L.
Kielbus, A.
ARCHIVES OF METALLURGY AND MATERIALS, 2016, 61 (01) : 353 - 359
[40] EFFECT OF AGING CONDITIONS ON PRECIPITATION HARDENING IN Al-Si-Mg AND Al-Si-Cu-Mg ALLOYS
Ibrahim, Mohamed F.
Samuel, Agnes M.
Samuel, Fawzy H.
Doty, Herbert W.
INTERNATIONAL JOURNAL OF METALCASTING, 2017, 11 (02) : 274 - 286

← 1 2 3 4 5 →