Effect of manganese oxide on the sintered properties and low temperature degradation of Y-TZP ceramics

被引：46

作者：

Ramesh, S. ^{[1
]}

Meenaloshini, S. ^{[2
]}

Tan, C. Y. ^{[1
]}

Chew, W. J. Kelvin ^{[2
]}

Teng, W. D. ^{[3
]}

机构：

[1] Univ Tenaga Nas, Ceram Technol Lab, Kajang, Selangor, Malaysia

[2] SEH Malaysia, Mat Characterizat Dept, Selangor, Malaysia

[3] SIRIM Berhad, Ceram Technol Grp, Shah Alam, Selangor, Malaysia

来源：

CERAMICS INTERNATIONAL | 2008年 / 34卷 / 07期

关键词：

manganese oxide; sintering additives; ageing; Y-TZP; zirconia;

D O I：

10.1016/j.ceramint.2007.04.012

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The sinterability of yttria-tetragonal zirconia polycrystals (Y-TZP) containing small amounts of MnO2 as sintering aid was investigated over the temperature range of 1250-1500 degrees C. Sintered samples were evaluated to determine bulk density, Young's modulus, Vickers hardness and fracture toughness. In addition, the tetragonal phase stability of selected samples was evaluated by subjecting the samples to hydrothermal ageing in superheated steam at 180 degrees C/10 bar for up to 24 h. The results showed that the addition of MnO2, particularly >= 0.3 wt% was effective in aiding densification, improving the matrix stiffness and hardness when compared to the undoped Y-TZP sintered at temperatures below 1350 degrees C. On the other hand, the fracture toughness of Y-TZP was unaffected by MnO2 addition except for the 1 wt% MnO2-doped Y-TZP samples sintered above 1400 degrees C. The hydrothermal ageing resistance of Y-TZP was significantly improved with the additions of MnO2 in the Y-TZP matrix. (C) 2007 Elsevier Ltd and Techna Group S.r.l. All rights reserved.

引用

页码：1603 / 1608

页数：6

共 50 条

[41] INVESTIGATION OF LOW-TEMPERATURE DEGRADATION OF Y-TZP BY COMPLEX IMPEDANCE SPECTROSCOPY
KENNEDY, EJ
LLOYD, IK
ADVANCED CHARACTERIZATION TECHNIQUES CERAMICS, 1988, 5 : 237 - 244
[42] Increasing resistance to low temperature ageing degradation of Y-TZP by surface modification
Feder, A
Morcillo, P
Anglada, MJ
Active Materials, Nanoscale Materials, Composites, Glass and Fundamentals, 2005, 14 : 625 - 634
[43] Indentation size effect of Y-TZP dental ceramics
Renjo, Marijana Majic
Curkovic, Lidija
Stefancic, Sanja
Coric, Danko
DENTAL MATERIALS, 2014, 30 (12) : E371 - E376
[44] Effect of anelasticity on fatigue behavior in Y-TZP ceramics
Horibe, S
FATIGUE '99: PROCEEDINGS OF THE SEVENTH INTERNATIONAL FATIGUE CONGRESS, VOLS 1-4, 1999, : 1521 - 1526
[45] Y-TZP ceramics with tailored toughness
Basu, B
Vleugels, J
Van Der Biest, O
EURO CERAMICS VII, PT 1-3, 2002, 206-2 : 1185 - 1188
[46] Assessment of low-temperature degradation of Y-TZP ceramics based on Raman-spectroscopic analysis and hardness indentation
Schroeder, Christian
Renz, Alexander
Koplin, Christof
Kailer, Andreas
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2014, 34 (16) : 4311 - 4319
[47] Influence of sintering pressure on the microstructure and tribological properties of low temperature fast sintered hot-pressed Y-TZP
Madeira, S.
Buciumeanu, M.
Carvalho, O.
Silva, F. S.
CERAMICS INTERNATIONAL, 2019, 45 (05) : 5883 - 5893
[48] Pre-sintered Y-TZP sandblasting: effect on surface roughness, phase transformation, and Y-TZP/veneer bond strength
Ramos-Tonello, Carla Muller
Trevizo, Bruno Freitas
Rodrigues, Raphaela Farias
Rodrigues Magalhaes, Ana Paula
Furuse, Adilson Yoshio
Lisboa-Filho, Paulo Noronha
Tabata, Americo Sheitiro
Sanches Borges, Ana Flavia
JOURNAL OF APPLIED ORAL SCIENCE, 2017, 25 (06) : 666 - 673
[49] Effect of doping on structure and electric property of Y-TZP ceramics
Chen, Wen
Wang, Hao
Cui, Wanqiu
Gongneng Cailiao/Journal of Functional Materials, 1993, 24 (04): : 356 - 361
[50] Direct evidence for continuous linear kinetics in the low-temperature degradation of Y-TZP
Keuper, M.
Eder, K.
Berthold, C.
Nickel, K. G.
ACTA BIOMATERIALIA, 2013, 9 (01) : 4826 - 4835

← 1 2 3 4 5 →