Coherent structures in the flow field generated by rigid flapping wing in hovering flight mode

被引:3
|
作者
Goli, S. [1 ]
Dammati, S. S. [1 ]
Roy, A. [1 ]
Roy, S. [2 ]
机构
[1] Indian Inst Technol Kharagpur, Dept Aerosp Engn, Kharagpur, W Bengal, India
[2] Indian Inst Technol Kharagpur, Dept Mech Engn, Kharagpur, W Bengal, India
关键词
LEADING-EDGE VORTICES; VORTEX IDENTIFICATION; SPANWISE FLOW;
D O I
10.1088/1757-899X/402/1/012155
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Galilean invariant vortex identification methods and proper orthogonal decomposition (POD) are used to capture the coherent structures (CS) in the flow field generated by rigid wing in main flapping motion. Experiments are conducted for a square rigid wing at a flapping frequency f = 1.5 Hz. Tests are performed in water as a fluid medium in hover mode. The main flapping mechanism executes asymmetric lower-upper stroke of 1:3 ratio single degree of freedom motion. Two dimensional particle image velocimetry (PIV) technique is used to generate the phase locked velocity field at each discrete flapping angle by illuminating the mid chord plane of the wing. Three different Galilean invariant methods namely lambda(2) criterion, Q criterion and Delta criterion are used for vortex identification. These methods were found to be consistent in detecting swirling vortices or coherent structures (CS). Proper orthogonal decomposition is used to exhibit the most energetic modes of the flow field. The captured modes were identified to be in-connect with vortex identification methods. The combination of these tools were found to be more effective in comparison with velocity field data for achieving a deeper understanding of the complex flow produced by the flapping wing.
引用
收藏
页数:18
相关论文
共 50 条
  • [21] Energetics of Flapping-Wing Robotic Insects: Towards Autonomous Hovering Flight
    Karpelson, Michael
    Whitney, John P.
    Wei, Gu-Yeon
    Wood, Robert J.
    [J]. IEEE/RSJ 2010 INTERNATIONAL CONFERENCE ON INTELLIGENT ROBOTS AND SYSTEMS (IROS 2010), 2010,
  • [22] Influences of flapping modes and wing kinematics on aerodynamic performance of insect hovering flight
    Chao Wang
    Chaoying Zhou
    Xiaorui Zhu
    [J]. Journal of Mechanical Science and Technology, 2020, 34 : 1603 - 1612
  • [23] Experimental and numerical studies of beetle-inspired flapping wing in hovering flight
    Truong, Tien Van
    Le, Tuyen Quang
    Park, Hoon Cheol
    Byun, Doyoung
    [J]. BIOINSPIRATION & BIOMIMETICS, 2017, 12 (03)
  • [24] Numerical simulation of 3D rigid wing hovering flight
    Zheng, Juan
    Su, Xiaohui
    [J]. 3RD INTERNATIONAL CONFERENCE ON FLUID MECHANICS AND INDUSTRIAL APPLICATIONS, 2019, 1300
  • [25] Optimization of lift force for a bio-inspired flapping wing model in hovering flight
    Zhang, Hao
    Wen, Chihyung
    Yang, Anshik
    [J]. INTERNATIONAL JOURNAL OF MICRO AIR VEHICLES, 2016, 8 (02) : 92 - 108
  • [26] Unsteady Aerodynamic Forces and Power Consumption of a Micro Flapping Rotary Wing in Hovering Flight
    Zhou, Chao
    Zhang, Yanlai
    Wu, Jianghao
    [J]. JOURNAL OF BIONIC ENGINEERING, 2018, 15 (02) : 298 - 312
  • [27] The role of wing bending deflection in the aerodynamics of flapping micro aerial vehicles in hovering flight
    Feshalami, Behzad Forouzi
    Djavareshkian, M. H.
    Zaree, A. H.
    Yousefi, Masoud
    Mehraban, A. A.
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING, 2019, 233 (10) : 3749 - 3761
  • [28] Unsteady Aerodynamic Forces and Power Consumption of a Micro Flapping Rotary Wing in Hovering Flight
    Chao Zhou
    Yanlai Zhang
    Jianghao Wu
    [J]. Journal of Bionic Engineering, 2018, 15 : 298 - 312
  • [29] An investigation into the longitudinal dynamics and control of a flapping wing micro air vehicle at hovering flight
    Loh, K
    Cook, M
    Thomasson, P
    [J]. AERONAUTICAL JOURNAL, 2003, 107 (1078): : 743 - 753
  • [30] Flow Field Characteristics and Lift Changing Mechanism for Half-Rotating Wing in Hovering Flight
    Li, Q.
    Wang, X. Y.
    Qiu, H.
    Li, C. M.
    Qiu, Z. Z.
    [J]. 3RD INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING AND AUTOMATION SCIENCE (ICMEAS 2017), 2017, 280