Effect of balance valve on an asymmetric twin-scroll turbine for heavy-duty diesel engine

被引:9
|
作者
Jin, Jianjiao [1 ]
Pan, Jianfeng [1 ]
Lu, Zhigang [2 ]
Wu, Qingrui [2 ]
Xu, Lizhong [2 ]
机构
[1] Jiangsu Univ, Sch Energy & Power Engn, 301 Xuefu Rd, Zhenjiang 212013, Jiangsu, Peoples R China
[2] Wuxi Cummins Turbo Technol Co Ltd, Wuxi, Jiangsu, Peoples R China
基金
美国国家科学基金会;
关键词
Asymmetric twin-scroll turbine; balance valve; turbine efficiency; fuel economy; emission; LOW-PRESSURE EGR; EMISSIONS; GEOMETRY; ENERGY; NOX; PERFORMANCE; COMBUSTION; REDUCTION; DESIGN;
D O I
10.1177/1468087420930162
中图分类号
O414.1 [热力学];
学科分类号
摘要
A conventional asymmetric twin-scroll turbine with wastegate is capable of effectively tackling down the contradiction between fuel economy degradation and low nitrogen oxide emissions. However, as the engine speed has been rising at middle- and high-speed ranges, the pressure of small scroll inlet will be increasingly higher as compared with the intake pressure, thereby worsening fuel economy. In this study, a novel turbocharging technology of asymmetric twin-scroll turbine with a balance valve was first analyzed to more effectively balance the engine fuel economy and emission. The experiments on turbine test rig and engine performance were performed to explore the effects of balance valve on turbine performance, asymmetric ratio, exhaust gas recirculation rate, as well as engine performance. As the balance valve open degree was elevated, the turbine flow parameter was being extended, while the turbine efficiency was enhanced. Moreover, a lower asymmetric ratio could lead to a broader flow parameter range between that of partial admission and equal admission, thereby resulting in a broader regulating range of exhaust gas recirculation rate. In contrast with the asymmetric twin-scroll turbine with wastegate, the turbine running efficiency of asymmetric twin-scroll turbine with balance valve was enhanced by nearly 2%-11% at middle and high engine speed ranges, while the fuel economy was improved by nearly 1.5%-8%.
引用
收藏
页码:2281 / 2292
页数:12
相关论文
共 50 条
  • [31] Soot wear mechanisms in heavy-duty diesel engine contacts
    Kirkby, Thomas
    Smith, Joshua J.
    Berryman, Jacqueline
    Fowell, Mark
    Reddyhoff, Tom
    [J]. WEAR, 2023, 524
  • [32] Enhancing the Durability of Connecting Rod of a Heavy-Duty Diesel Engine
    Ismail, I.
    Abdelrazek, S. M.
    Ismail, M.
    Emara, A.
    [J]. INTERNATIONAL JOURNAL OF AUTOMOTIVE AND MECHANICAL ENGINEERING, 2021, 18 (02) : 8728 - 8737
  • [33] Effects of altitude on the thermal efficiency of a heavy-duty diesel engine
    Wang, Xin
    Ge, Yunshan
    Yu, Linxiao
    Feng, Xiangyu
    [J]. ENERGY, 2013, 59 : 543 - 548
  • [34] An Expert System for Diagnosing Heavy-Duty Diesel Engine Faults
    Nabende, Peter
    Wanyama, Tom
    [J]. Advances in Computer and Informatiom Sciences and Engineering, 2008, : 384 - 389
  • [35] Low-viscosity, heavy-duty diesel engine oils
    Whitby, R. David
    [J]. TRIBOLOGY & LUBRICATION TECHNOLOGY, 2012, 68 (09) : 80 - 80
  • [36] Assessment of an electrical coolant pump on a heavy-duty diesel engine
    Kiesenhofer, Markus
    [J]. SN APPLIED SCIENCES, 2021, 3 (03)
  • [38] Diesel Particle Filter and Fuel Effects on Heavy-Duty Diesel Engine Emissions
    Ratcliff, Matthew A.
    Dane, A. John
    Williams, Aaron
    Ireland, John
    Luecke, Jon
    McCormick, Robert L.
    Voorhees, Kent J.
    [J]. ENVIRONMENTAL SCIENCE & TECHNOLOGY, 2010, 44 (21) : 8343 - 8349
  • [39] AXIAL TURBINE DESIGN FOR A TWIN-TURBINE HEAVY-DUTY TURBOCHARGER CONCEPT
    Anton, Nicholas
    Genrup, Magnus
    Fredriksson, Carl
    Larsson, Per-Inge
    Christiansen-Erlandsson, Anders
    [J]. PROCEEDINGS OF THE ASME TURBO EXPO: TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, 2018, VOL 2B, 2018,
  • [40] ON THE CHOICE OF TURBINE TYPE FOR A TWIN-TURBINE HEAVY-DUTY TURBOCHARGER CONCEPT
    Anton, Nicholas
    Genrup, Magnus
    Fredriksson, Carl
    Larsson, Per-Inge
    Christiansen-Erlandsson, Anders
    [J]. PROCEEDINGS OF THE ASME TURBO EXPO: TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, 2018, VOL 8, 2018,