Preparation and characterization of copper oxide nanofluid for heat transfer applications

被引：113
|
作者：
Manimaran, R. [1 ]
Palaniradja, K. [1 ]
Alagumurthi, N. [1 ]
Sendhilnathan, S. [2 ]
Hussain, J. [1 ]
机构：
[1] Pondicherry Engn Coll, Dept Mech Engn, Pondicherry, India
[2] Anna Univ Technol, Dept Phys, Tiruchirappalli, India
来源：
APPLIED NANOSCIENCE | 2014年 / 4卷 / 02期
关键词：
Copper oxide; XRD; Nanofluid; Thermal conductivity; THERMAL-CONDUCTIVITY; CUO; NANOPARTICLES; FLUID;
D O I：
10.1007/s13204-012-0184-7
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Copper oxide nanofluid has been prepared by single-step wet chemical precipitation method. The preparation of nanofluid is carried out by reducing copper chloride with sodium hydroxide as reducing agent in deionised water as base fluid by means of conventional heating. The characterization of sample nano powder is done by X-ray diffraction (XRD), EDXA, SEM, and TGA. The mean size of the particle was determined from the XRD pattern by using the Scherrer formula and the average particle size was found to be 20 nm. Also an increase in thermal conductivity of the prepared copper oxide nanofluid was found to be 12.4 % compared to deionised water.
引用
收藏
页码：163 / 167
页数：5
相关论文
共 50 条
  • [31] Experimental prediction of flow boiling heat transfer coefficient of Water and Copper Oxide nanofluid using ANNOVA technique
    Hegde, Nandan Dattatraya
    Kumar, Kupireddi Kiran
    Sudheer, Sudi Venkata Sai
    INTERNATIONAL JOURNAL OF NANO DIMENSION, 2022, 13 (03) : 296 - 310
  • [32] An ecofriendly graphene-based nanofluid for heat transfer applications
    Mehrali, Mohammad
    Sadeghinezhad, Emad
    Akhiani, Amir Reza
    Latibari, Sara Tahan
    Talebian, Sepehr
    Dolatshahi-Pirouz, Alireza
    Metselaar, Hendrik Simon Cornelis
    Mehrali, Mehdi
    JOURNAL OF CLEANER PRODUCTION, 2016, 137 : 555 - 566
  • [33] Enhancement of Heat Transfer Properties for ZnO/Water Nanofluid in Heat Exchange Applications
    Safir, Nadhum H.
    Bin-Abdun, Nazih A.
    Razlan, Z. M.
    Amin, N. A. M.
    Voon, C. H.
    GREEN DESIGN AND MANUFACTURE: ADVANCED AND EMERGING APPLICATIONS, 2018, 2030
  • [34] Characterization of ZnO/nanofluid for improving heat transfer in thermal systems
    Sharma, Rajneesh
    Chauhan, Prashant
    Sharma, Amit Kumar
    Katiyar, Atul
    Singh, Hari Kumar
    Rinawa, Moti Lal
    Kumar, P. Manoj
    MATERIALS TODAY-PROCEEDINGS, 2022, 62 : 1904 - 1908
  • [35] Preparation and characterization of cobalt and copper oxide nanocrystals
    Moharram, A. H.
    MATERIALS SCIENCE-POLAND, 2019, 37 (03) : 347 - 352
  • [36] Preparation of binary nanofluid with heat transfer additives by particle surface functionalisation
    Umar Aliyu Muhammad
    Debabratta Bhattacharyya
    Jose Louis Endrino
    Sonia Fereres
    Emergent Materials, 2021, 4 : 1649 - 1664
  • [37] Preparation of binary nanofluid with heat transfer additives by particle surface functionalisation
    Muhammad, Umar Aliyu
    Bhattacharyya, Debabratta
    Endrino, Jose Louis
    Fereres, Sonia
    EMERGENT MATERIALS, 2021, 4 (06) : 1649 - 1664
  • [38] Experimental investigation of graphene oxide nanofluid on heat transfer enhancement of pulsating heat pipe
    Nazari, Mohammad Alhuyi
    Ghasempour, Roghayeh
    Ahmadi, Mohammad Hossein
    Heydarian, Gholamreza
    Shafii, Mohammad Behshad
    INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2018, 91 : 90 - 94
  • [39] Characterization of Copper Oxide-Jatropha Oil Nanofluid as a Secondary Refrigerant
    Gobane, Seboka
    Dama, Tesfaye
    Hasan, Nasim
    Yanmaz, Ekrem
    Journal of Nanomaterials, 2023, 2023
  • [40] An investigation of silicon carbide-water nanofluid for heat transfer applications
    Singh, D.
    Timofeeva, E.
    Yu, W.
    Routbort, J.
    France, D.
    Smith, D.
    Lopez-Cepero, J. M.
    JOURNAL OF APPLIED PHYSICS, 2009, 105 (06)
12345