Preparation and characterization of copper oxide nanofluid for heat transfer applications

被引：113
|
作者：
Manimaran, R. [1 ]
Palaniradja, K. [1 ]
Alagumurthi, N. [1 ]
Sendhilnathan, S. [2 ]
Hussain, J. [1 ]
机构：
[1] Pondicherry Engn Coll, Dept Mech Engn, Pondicherry, India
[2] Anna Univ Technol, Dept Phys, Tiruchirappalli, India
来源：
APPLIED NANOSCIENCE | 2014年 / 4卷 / 02期
关键词：
Copper oxide; XRD; Nanofluid; Thermal conductivity; THERMAL-CONDUCTIVITY; CUO; NANOPARTICLES; FLUID;
D O I：
10.1007/s13204-012-0184-7
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Copper oxide nanofluid has been prepared by single-step wet chemical precipitation method. The preparation of nanofluid is carried out by reducing copper chloride with sodium hydroxide as reducing agent in deionised water as base fluid by means of conventional heating. The characterization of sample nano powder is done by X-ray diffraction (XRD), EDXA, SEM, and TGA. The mean size of the particle was determined from the XRD pattern by using the Scherrer formula and the average particle size was found to be 20 nm. Also an increase in thermal conductivity of the prepared copper oxide nanofluid was found to be 12.4 % compared to deionised water.
引用
收藏
页码：163 / 167
页数：5
相关论文
共 50 条
  • [1] Preparation and characterization of copper oxide nanofluid for heat transfer applications
    R. Manimaran
    K. Palaniradja
    N. Alagumurthi
    S. Sendhilnathan
    J. Hussain
    Applied Nanoscience, 2014, 4 : 163 - 167
  • [2] Synthesis and characterization of nanofluid for advanced heat transfer applications
    Chopkar, Manoj
    Das, Prasanta K.
    Manna, Indranil
    SCRIPTA MATERIALIA, 2006, 55 (06) : 549 - 552
  • [3] NANOFLUID HEAT TRANSFER AND APPLICATIONS
    Asirvatham, Lazarus Godson
    JOURNAL OF THERMAL ENGINEERING, 2015, 1 (02): : 113 - 115
  • [4] Characterization of halloysite-water nanofluid for heat transfer applications
    Alberola, J. A.
    Mondragon, R.
    Julia, J. E.
    Hernandez, L.
    Cabedo, L.
    APPLIED CLAY SCIENCE, 2014, 99 : 54 - 61
  • [5] Synthesis and characterization of nanofluid for advanced heat-transfer applications
    Chopkar, M.
    Das, P. K.
    Manna, I.
    Nano-Scale Materials: From Science to Technology, 2006, : 275 - 283
  • [6] Preparation and stability characterization of copper oxide nanofluid by two step method
    Subramaniyan, A.L.
    Kumar, Arun
    Sethupathi
    Kumar, T. Sorna
    Ilangovan, Rajangam
    Materials Science Forum, 2015, 832 : 139 - 143
  • [7] Investigation on thermophysical properties of zinc oxide nanofluid for heat transfer applications
    Vidhya, R.
    Balakrishnan, T.
    Kumar, B. Suresh
    MATERIALS TODAY-PROCEEDINGS, 2022, 58 : 789 - 794
  • [8] Heat transfer enhancement in a double pipe heat exchanger with copper oxide nanofluid: An experimental study
    Kavitha, R.
    Abd Algani, Yousef Methkal
    Kulkarni, Kaustubh
    Gupta, Mk
    MATERIALS TODAY-PROCEEDINGS, 2022, 56 : 3446 - 3449
  • [9] On the convection heat transfer and pressure drop of copper oxide-heat transfer oil Nanofluid in inclined microfin pipe
    Hekmatipour, Farhad
    Jalali, Milad
    Hekmatipour, Farzad
    Akhavan-Behabadi, Mohammad A.
    Sajadi, B.
    HEAT AND MASS TRANSFER, 2019, 55 (02) : 433 - 444
  • [10] On the convection heat transfer and pressure drop of copper oxide-heat transfer oil Nanofluid in inclined microfin pipe
    Farhad Hekmatipour
    Milad Jalali
    Farzad Hekmatipour
    Mohammad A. Akhavan-Behabadi
    B. Sajadi
    Heat and Mass Transfer, 2019, 55 : 433 - 444
12345