Design and characterization of a rotating brushless PM exciter for a synchronous generator test setup

被引：0

作者：

Noland, Jonas Kristiansen ^{[1
,2
]}

Evestedt, Fredrik ^{[3
]}

Perez-Loya, J. Jose ^{[3
]}

Abrahamsson, Johan ^{[3
]}

Lundin, Urban ^{[3
]}

机构：

[1] Uppsala Univ, Dept Engn Sci, Div Elect, S-75121 Uppsala, Sweden

[2] Univ Coll Southeast Norway, Fac Technol & Maritime Sci, N-3184 Borre, Norway

[3] Uppsala Univ, S-75121 Uppsala, Sweden

来源：

2016 XXII INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES (ICEM) | 2016年

关键词：

Brushless exciters; rotating exciters; permanent magnet machines; machine design; voltage measurement;

D O I：

暂无

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

This paper deals with the characterization and construction of a rotating brushless PM exciter intended for synchronous generator excitation purposes. Traditionally, PM exciters are used as pre-exciters in synchronous generator excitations systems. In order to reduce the number of components and to increase the step time response of the system, a PM exciter is designed as an outer pole PM machine, with permanent magnets on the stator and armature windings on the rotor. The exciter was constructed electrically and mechanically to be fitted into an in-house synchronous generator test setup. A finite element model of the exciter was validated with no-load measurements of voltages and magnetic flux densities. The exciter was then characterized with unsaturated and saturated parameters.

引用

页码：259 / 265

页数：7

共 50 条

[31] Structure and Operating Performance of a Double Electrical Excitation Synchronous Generator With Embedded Brushless Synchronous Exciter Utilizing DC-Field Excitation
Zhu, Shushu
Liu, Chuang
Wang, Kai
Zhou, Zhou
Yu, Junyue
[J]. IEEE TRANSACTIONS ON ENERGY CONVERSION, 2022, 37 (01) : 50 - 64
[32] Optimal design of brushless AC exciter for large synchronous generators considering grid codes requirements
Gorginpour, Hamed
[J]. IET GENERATION TRANSMISSION & DISTRIBUTION, 2018, 12 (17) : 3954 - 3962
[33] Predictive diagnostics for the main field winding and rotating rectifier assembly in the brushless synchronous generator
Batzel, TD
Swanson, DC
Defenbaugh, JF
[J]. IEEE INTERNATIONAL SYMPOSIUM ON DIAGNOSTICS FOR ELECTRIC MACHINES, POWER ELECTRONICS AND DRIVES, PROCEEDINGS, 2003, : 349 - 354
[34] Brushless Three-Phase Synchronous Generator Under Rotating Diode Failure Conditions
Salah, Mohamed
Bacha, Khmais
Chaari, Abdelkader
Benbouzid, Mohamed El Hachemi
[J]. IEEE TRANSACTIONS ON ENERGY CONVERSION, 2014, 29 (03) : 594 - 601
[35] Design and control of a PM brushless hybrid generator for wind power application
Chau, K. T.
Li, Y. B.
Jiang, J. Z.
Niu, Shuangxia
[J]. IEEE TRANSACTIONS ON MAGNETICS, 2006, 42 (10) : 3497 - 3499
[36] Design and Analysis of a Static Excitation Part of a Brushless Wound Rotor Excitation Synchronous Machine Without an Exciter
Zhu, Shushu
Hu, Yaohua
Liu, Chuang
Wang, Kai
Yu, Junyue
Zhou, Zhou
Jiang, Bin
[J]. IEEE TRANSACTIONS ON ENERGY CONVERSION, 2020, 35 (03) : 1182 - 1195
[37] Sensorless Starting Control of the Brushless Synchronous Starter/Generator by Using the Main Exciter as a Quasi-Resolver at Low Speed
Mao, Shuai
Han, Xu
Liu, Weiguo
Meng, Haiying
[J]. IEEE TRANSACTIONS ON POWER ELECTRONICS, 2023, 38 (04) : 5141 - 5153
[38] Design and Characterization of a Single-Phase Main Exciter for Aircraft Wound-Rotor Synchronous Starter-Generator
Li, Jincai
Zhang, Zhuoran
Lu, Jiawei
Liu, Ye
Chen, Zhihui
[J]. IEEE TRANSACTIONS ON MAGNETICS, 2018, 54 (11)
[39] Design of a Three-Phase Brushless Exciter for Static Frequency Converter-Synchronous Motor Drive
Liu, Guangjun
Wang, Xuefan
Xiong, Fei
[J]. 2013 INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS (ICEMS), 2013, : 72 - 76
[40] Design and Control Strategy of a Two-Phase Brushless Exciter for Three-Stage Starter/Generator
Jiao, Ningfei
Liu, Weiguo
Peng, Jichang
Mao, Shuai
Zhang, Hua
[J]. 2014 IEEE ENERGY CONVERSION CONGRESS AND EXPOSITION (ECCE), 2014, : 5864 - 5869

← 1 2 3 4 5 →