A Fast Linearly Wavelength Step-Swept Light Source Based on Recirculating Frequency Shifter and Its Application to FBG Sensor Interrogation

A wavelength step-swept light source (WSSL) using a recirculating frequency shifter loop (RFSL) based on a single-side-band (SSB) modulator is proposed, in order to achieve a linear and fast wavelength-sweeping. The swept step can be tuned from 1.2 pm to 128 pm by adjusting a precise and stable radio frequency (RF) signal that is applied to the SSB modulator. The swept rate can be tuned up to 99 kHz in a range of over 5.12 nm. Wavelength-to-time mapping is used to measure static strain-induced or temperature-induced shifting of the reflected central wavelength of a fiber Bragg grating (FBG). Because of the high linearity of the light source, the interrogation linearity of the strain and the temperature are as high as 0.99944 and 0.99946, respectively. When a dynamic periodic strain applied to FBG sensor, the dynamic performance of the FBG sensor is successfully recorded in the time domain and its power spectral density of a fast Fourier transform (FFT) is calculated. The signal-to-noise ratio (SNR) of the power spectral density is over 40 dB for a 100 Hz dynamic strain and the calculated sensitivity is 0.048 mu epsilon/Hz(1/2). A sharp change in the strain frequency from 100 Hz to 500 Hz is captured in real time.