CFD-modeling of effects of draft tubes on operating condition in spouted beds

被引：21
|
作者：
Moradi, S. [1 ]
Yeganeh, A. [1 ]
Salimi, M. [2 ]
机构：
[1] Arak Univ, Dept Chem Engn, Fac Engn, Arak 3815688349, Iran
[2] Islamic Azad Univ, Dept Chem Engn, Arak Branch, Arak, Iran
来源：
APPLIED MATHEMATICAL MODELLING | 2013年 / 37卷 / 04期
关键词：
Spouted bed with draft tube; CFD; Simulation; DESIGN; FLOW;
D O I：
10.1016/j.apm.2012.04.016
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Draft tubes are used to increase performance in spouted beds. Performance of these tubes depends on its geometry and location. We can by surveying and CFD modeling of bed provide the best condition. In this work a CFD modeling technique is used to optimize draft tube geometry. First, model accuracy was assessed by comparing the results with experimental results. After it became clear that the model works, it was used to optimize the designing of spouted bed. The Eulerian-Eulerian multifluid modeling approach was applied to predict gas-solid flow behavior. The results present that optirnized selection of draft tubes lead to uniform distribution of particle velocity and it can increase also particles circulating. (C) 2012 Elsevier Inc. All rights reserved.
引用
收藏
页码：1851 / 1859
页数：9
相关论文
共 31 条
  • [21] Particle Cycle Times and Solid Circulation Rates in Conical Spouted Beds with Draft Tubes of Different Configuration
    Altzibar, H.
    Lopez, G.
    Estiati, I.
    Bilbao, J.
    Olazar, M.
    [J]. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2013, 52 (45) : 15959 - 15967
  • [22] CFD modeling of heat transfer and hydrodynamics in a draft tube conical spouted bed reactor under pyrolysis conditions: Impact of wall boundary condition
    Hooshdaran, B.
    Hosseini, S. H.
    Haghshenasfard, M.
    Esfahany, M. Nasr
    Olazar, M.
    [J]. APPLIED THERMAL ENGINEERING, 2017, 127 : 224 - 232
  • [23] Smart computing approach for design and scale-up of conical spouted beds with open-sided draft tubes
    Karimi, M.
    Vaferi, B.
    Hosseini, S. H.
    Olazar, M.
    Rashidi, S.
    [J]. PARTICUOLOGY, 2021, 55 : 179 - 190
  • [24] Impacts of solid-phase wall boundary condition on CFD simulation of conical spouted beds containing heavy zirconia particles
    Setarehshenas, N.
    Hosseini, S. H.
    Esfahany, M. Nasr
    Ahmadi, G.
    [J]. JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS, 2016, 64 : 146 - 156
  • [25] Effects of Operating Parameters on Hydrodynamic Behavior of Spout-Fluid Beds without and with a Draft Tube
    Nagashima, Hiroshi
    Kawashiri, Yuta
    Suzukawa, Kazumi
    Ishikura, Toshifumi
    [J]. NEW PARADIGM OF PARTICLE SCIENCE AND TECHNOLOGY, PROCEEDINGS OF THE 7TH WORLD CONGRESS ON PARTICLE TECHNOLOGY, 2015, 102 : 952 - 958
  • [26] CFD modeling of pressure drop and drag coefficient in fixed beds:Wall effects
    Rupesh K.Reddy
    Jyeshtharaj B.Joshi
    [J]. Particuology, 2010, 8 (01) : 37 - 43
  • [27] CFD modeling of pressure drop and drag coefficient in fixed beds: Wall effects
    Reddy, Rupesh K.
    Joshi, Jyeshtharaj B.
    [J]. PARTICUOLOGY, 2010, 8 (01) : 37 - 43
  • [28] CFD modeling the hydrodynamics of binary particle mixtures in bubbling fluidized beds: Effect of wall boundary condition
    Zhong, Hanbin
    Gao, Jinsen
    Xu, Chunming
    Lan, Xingying
    [J]. POWDER TECHNOLOGY, 2012, 230 : 232 - 240
  • [29] Multiscale CFD Modeling of Area-Selective Atomic Layer Deposition: Application to Reactor Design and Operating Condition Calculation
    Yun, Sungil
    Wang, Henrik
    Tom, Matthew
    Ou, Feiyang
    Orkoulas, Gerassimos
    Christofides, Panagiotis D. D.
    [J]. COATINGS, 2023, 13 (03)
  • [30] CFD analysis of operating condition effects on optimum nozzle exit position of a supersonic ejector using the refrigerant R134a
    Hadj, Ali
    Boulenouar, Mohammed
    [J]. COMPTES RENDUS MECANIQUE, 2021, 349 (01): : 189 - 202
1234