Precipitation hardening in the Cu-11 wt.%Al-10 wt.%Mn alloy with Ag addition

被引：9

作者：

Silva, R. A. G. ^{[1
]}

Paganotti, A. ^{[1
]}

Adorno, A. T. ^{[2
]}

Santos, C. M. A. ^{[2
]}

Carvalho, T. M. ^{[2
]}

机构：

[1] UNIFESP, Dept Ciencias Exatas & Terra, Diadema, SP, Brazil

[2] UNESP, Dept Quim Fis, Araraquara, SP, Brazil

来源：

JOURNAL OF ALLOYS AND COMPOUNDS | 2015年 / 643卷

基金：

巴西圣保罗研究基金会;

关键词：

Metals and alloys; Phase transitions;

D O I：

10.1016/j.jallcom.2014.12.208

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

In this work the precipitation hardening in the Cu-11 wt.%Al-10 wt.%Mn alloy with Ag addition was studied using different experimental techniques. The results indicated that the hardening on ageing of the Cu-11 wt.%Al-10 wt.%Mn alloy is only due to bainite precipitation, while in the Cu-11 wt.%Al-10 wt.%Mn-3%Ag alloy three reactions in sequence can occur, including the bainite precipitation. (C) 2015 Elsevier B.V. All rights reserved.

引用

页码：S178 / S181

页数：4

共 50 条

[11] Comparative study of gravity effects in directional solidification of Al-3.5 wt.% Si and Al-10 wt.% Cu alloys
Zhang, Guiyuan
Luo, Xinghong
Li, Yang
Liu, Shi
NPJ MICROGRAVITY, 2024, 10 (01)
[12] The Effect of Tin on Microstructure and Properties of the Al-10 wt.% Si Alloy
Kozana, Janusz
Pieekos, Marcin
Garbacz-Klempka, Aldona
Perek-Nowak, Malgorzata
MATERIALS, 2022, 15 (18)
[13] Discontinuous and continuous precipitation in Cu-13 wt.% Sn and Al-20 wt.% Ag alloys
Hamana, D
Boumerzoug, Z
Fatmi, M
Chekroud, S
MATERIALS CHEMISTRY AND PHYSICS, 1998, 53 (03) : 208 - 216
[14] A multidisciplinary approach to study precipitation kinetics and hardening in an Al-4Cu (wt. %) alloy
LLorca, J. (javier.llorca@upm.es), 1600, Elsevier Ltd (757):
[15] Rapid precipitation of dispersoids during extrusion of an Al-0.91 wt.% Mn-0.13 wt.% Zr-0.17 wt.% Sc-alloy
Forbord, B.
Auran, L.
Lefebvre, W.
Hallem, H.
Marthinsen, K.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 424 (1-2): : 174 - 180
[16] Phase stability in the Cu-9 wt%Al-10 wt%Mn-3 wt%Ag alloy
Santos, C. M. A.
Adorno, A. T.
Paganotti, A.
Silva, C. C. S.
Oliveira, A. B.
Silva, R. A. G.
JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS, 2017, 104 : 145 - 151
[17] A multidisciplinary approach to study precipitation kinetics and hardening in an Al-4Cu (wt. %) alloy
Rodriguez-Veiga, A.
Bellon, B.
Papadimitriou, I.
Esteban-Manzanares, G.
Sabirov, I.
LLorca, J.
JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 757 : 504 - 519
[18] Formation of microstructures of an Al-10 wt.% Sr alloy prepared by electrolysis and mixing
Zhang, ZH
Bian, XF
Wang, Y
MATERIALS LETTERS, 2003, 57 (07) : 1261 - 1265
[19] Hot ductility of an Al-4 wt.%Mg-0.5 wt.%Cu alloy
Katholieke Universiteit Leuven, Leuven, Belgium
Mater Sci Eng A Struct Mater Prop Microstruct Process, 2 (189-196):
[20] Microstructure and physical properties of melt spun Al-17 wt.% Ni-10 wt.% Cu alloy
Ahmed, Emad M.
Gouda, El Said
EUROPEAN PHYSICAL JOURNAL-APPLIED PHYSICS, 2010, 50 (02): : 213011 - 213013

← 1 2 3 4 5 →