Dissimilar Laser Welding of Ti-6Al-4V to Ti-6Al-6V-2Sn

被引：2
|
作者：
Chiu, C. Y. [1 ]
Lu, M. Y. [1 ]
Tsay, L. W. [1 ]
机构：
[1] Natl Taiwan Ocean Univ, Inst Mat Engn, Keelung 202, Taiwan
来源：
MANUFACTURING SCIENCE AND TECHNOLOGY, PTS 1-3 | 2011年 / 295-297卷
关键词：
Laser welding; Notched tensile strength; Ti-6Al-4V; Ti-6A16V-2Sn; POSTWELD HEAT-TREATMENT; CRACK GROWTH-BEHAVIOR; FRACTURE-TOUGHNESS; TITANIUM-ALLOYS; MICROSTRUCTURE;
D O I：
10.4028/www.scientific.net/AMR.295-297.2353
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Notched tensile strength (NTS) of the Ti-6Al-4V (Ti-6-4) to Ti-6A16V-2Sn (Ti-6-6-2) dissimilar laser yields were determined, which had been subjected to post-weld heat treatment (PWHT) over the temperature range of 482-704 degrees C. The results indicated for the weld with the PWFIT at 482 degrees C the fusion zone (FZ) and heat-affected zone (HAZ) showed a peak hardness, as compared with other welds at the counterpart regions, whereas, the weld with the PWHT at 704 degrees C had the lowest hardness among the welds. In all the welds, the FZ of the weld subjected to PWHT at 482 degrees C possessed the lowest NTS, while the as-welded and the weld with PWHT at 704 degrees C had superior NTS to others. The presence of grain boundary alpha, which promoted grain boundary shear, accounted for the typical features of mainly transgranular fracture with intergranular dimples of the welds.
引用
收藏
页码：2353 / 2357
页数：5
相关论文
共 50 条
  • [21] Laser Cladding of Ti-6Al-4V Powder on Ti-6Al-4V Substrate: Effect of Laser Cladding Parameters on Microstructure
    Cottam, Ryan
    Brandt, Milan
    LASERS IN MANUFACTURING 2011: PROCEEDINGS OF THE SIXTH INTERNATIONAL WLT CONFERENCE ON LASERS IN MANUFACTURING, VOL 12, PT A, 2011, 12 : 323 - 329
  • [22] Distribution of Al Element of Ti-6Al-4V Joints by Fiber Laser Welding
    Zhang, Jiajia
    Hu, Renzhi
    Pang, Shengyong
    Huang, Anguo
    COATINGS, 2019, 9 (09)
  • [23] An empirical-statistical model for laser cladding of Ti-6Al-4V powder on Ti-6Al-4V substrate
    Nabhani, Mohammad
    Razavi, Reza Shoja
    Barekat, Masoud
    OPTICS AND LASER TECHNOLOGY, 2018, 100 : 265 - 271
  • [24] FATIGUE AND CRACK-PROPAGATION BEHAVIOR IN TI-6AL-6V-2SN
    AMATEAU, MF
    KENDALL, EG
    METALS ENGINEERING QUARTERLY, 1974, 14 (03): : 59 - 61
  • [25] FRACTOGRAPHIC EXAMINATION OF TI-6AL-6V-2SN FATIGUE SURFACE FEATURES
    CROOKER, TW
    COOLEY, LA
    REPORT OF NRL PROGRESS, 1970, : 34 - &
  • [26] METALLURGICAL OPTIMIZATION OF COMMERCIAL PURITY TI-6AL-6V-2SN ALLOY
    YODER, GR
    COOLEY, LA
    CROOKER, TW
    REPORT OF NRL PROGRESS, 1975, (SEP): : 18 - 20
  • [27] The laser additive manufacture of Ti-6Al-4V
    Kobryn, PA
    Semiatin, SL
    JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY, 2001, 53 (09): : 40 - 42
  • [28] The laser additive manufacture of Ti-6Al-4V
    P. A. Kobryn
    S. L. Semiatin
    JOM, 2001, 53 : 40 - 42
  • [29] Laser surface texturing on Ti-6Al-4V
    Shivakoti, Ishwer
    Kibria, Golam
    Das, Soham
    Sharma, Ashis
    Pradhan, Bal Bahadur
    Chatterjee, Somenath
    MATERIALS AND MANUFACTURING PROCESSES, 2021, 36 (07) : 858 - 867
  • [30] Laser Gas Alloying of Ti-6Al-4V
    Majumdar, Jyotsna Dutta
    LASERS IN MANUFACTURING 2011: PROCEEDINGS OF THE SIXTH INTERNATIONAL WLT CONFERENCE ON LASERS IN MANUFACTURING, VOL 12, PT A, 2011, 12 : 472 - 477
12345