Study on High-speed Milling Force of SiCp/Al Matrix Composite

被引：0
|
作者：
Xin, Long [1 ]
Lv, Junjuan [2 ]
机构：
[1] Shenyang Ligong Univ, High Speed Machining Technol Ctr, Shenyang 110159, Peoples R China
[2] RuiPing Elect & Coal Co Ltd, Pingdingshan 467500, Peoples R China
来源：
MATERIAL DESIGN, PROCESSING AND APPLICATIONS, PARTS 1-4 | 2013年 / 690-693卷
关键词：
SiCp/Al; high-speed milling; milling force;
D O I：
10.4028/www.scientific.net/AMR.690-693.338
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
On the condition of some milling depth and feed rate, By means of high-speed milling force measurement of SiCp/Al matrix composite, the rule for impact of milling speed on milling force is revealed successfully. In some range of milling speed, when SiCp/Al is high-speed milled, the milling force is lowered with increase of milling speed. Furthermore, the experiment also show that the optimal milling speed should be adjusted between 200 and 260 m/min for the SiCp/Al matrix composite with 56% volume fraction and particle size of 60 mu m.
引用
收藏
页码：338 / +
页数：2
相关论文
共 50 条
  • [41] Cutting Force Prediction of Stainless Steel in High-speed Milling
    Xie, Xiaozheng
    Yao, Yunping
    Zhao, Rongzhen
    Jin, Wuyin
    MATERIALS PROCESSING TECHNOLOGY II, PTS 1-4, 2012, 538-541 : 1369 - 1372
  • [42] The Study on Three-Dimensional Roughness of Machined Surface in High Speed Milling of SiCp/Al Composites
    Wang, Y. J.
    Zhou, M.
    Zhao, Y. H.
    HIGH SPEED MACHINING, 2011, 188 : 179 - 183
  • [43] Study on Prediction Model and Experiments of High-speed Milling Force for Stainless Steel 316
    Zheng Weifeng
    Wu Jingquan
    Liu Can
    Li Guanghui
    Tan Guangyu
    ADVANCES IN FUNCTIONAL MANUFACTURING TECHNOLOGIES, 2010, 33 : 6 - 10
  • [44] Stability Prediction in High-Speed Milling Process Considering the Milling Force Coefficients Dependent on the Spindle Speed
    Wen, Kunlong
    Qi, Houjun
    Jin, Gang
    JOURNAL OF ADVANCED MANUFACTURING SYSTEMS, 2014, 13 (04) : 247 - 255
  • [45] A study of high-speed milling characteristics of nitinol
    Huang, H
    MATERIALS AND MANUFACTURING PROCESSES, 2004, 19 (02) : 159 - 175
  • [46] The Simulation of Cutting Force and Temperature in High-Speed Milling of Ti-6Al-4V
    Yang, Zhenchao
    Zhang, Dinghua
    Huang, Xinchun
    Yao, Changfeng
    Ren, Junxue
    MANUFACTURING ENGINEERING AND AUTOMATION I, PTS 1-3, 2011, 139-141 : 768 - 771
  • [47] Experimental study and modeling of cutting force in high-speed milling of Ti-6Al-4V titanium alloy
    Mou, Huahong
    Xue, Wenchao
    Wu, Lan
    Zhang, Ziyuan
    Tu, Zhibiao
    Lian, Zhibiao
    JOURNAL OF MECHANICS, 2025, 41 : 55 - 63
  • [48] SiCp/Al milling force optimization and empirical formula modeling
    Wang Kang
    Wang Aimin
    Xu Kai
    Chang Xiaofei
    PROCEEDINGS OF 2020 IEEE 11TH INTERNATIONAL CONFERENCE ON MECHANICAL AND INTELLIGENT MANUFACTURING TECHNOLOGIES (ICMIMT 2020), 2020, : 78 - 82
  • [49] A hybrid cutting force model for high-speed milling of titanium alloys
    Wang, ZG
    Rahman, M
    Wong, YS
    Li, XP
    CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2005, 54 (01) : 71 - 74
  • [50] Characterisation of surface micro-topography by power spectral density in high speed precision planar milling of SiCp/Al composite
    Wang Y.-J.
    Zhou M.
    Zhao Y.-H.
    International Journal of Nanomanufacturing, 2011, 7 (5-6) : 436 - 447
12345