Experimental Study on Start-up Characteristics of Pulsating Heat Pipe

被引：10

作者：

Wang, Xun ^{[1
]}

Han, Tong ^{[1
]}

Wang, Lei ^{[1
]}

Mao, Xinxin ^{[1
]}

Yang, Chengsi ^{[1
]}

机构：

[1] Tianjin Univ, Dept Thermal & Refrigerat Engn, Tianjin 300072, Peoples R China

来源：

PROGRESS IN POWER AND ELECTRICAL ENGINEERING, PTS 1 AND 2 | 2012年 / 354-355卷

关键词：

pulsating heat pipe; experimental study; start-up characteristics;

D O I：

10.4028/www.scientific.net/AMR.354-355.87

中图分类号：

TE [石油、天然气工业]; TK [能源与动力工程];

学科分类号：

0807 ; 0820 ;

摘要：

Pulsating heat pipe (PHP) with distilled water and acetone as working fluids was experimentally investigated. It is found that the PHP required a certain range of heating power to be started, within which the time required to start the PHP became shorter when the heating power was higher. There was a certain incline angle which is 45 in this experiment to start the PHP more quickly than other angles performed. The minimum power to start the PHP became higher when the filling ratio was higher. Compared with distilled water, the PHP was more readily to be started with acetone as working fluid.

引用

下载

页码：87 / 91

页数：5

共 50 条

[41] VAPOR DYNAMICS OF HEAT PIPE START-UP
ISSACCI, F
CATTON, I
GHONIEM, NM
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 1991, 113 (04): : 985 - 994
[42] Start-up in microgravity and local thermodynamic states of a hybrid loop thermosyphon/pulsating heat pipe
Mameli, Mauro
Catarsi, Andrea
Mangini, Daniele
Pietrasanta, Luca
Miche, Nicholas
Marengo, Marco
Di Marco, Paolo
Filippeschi, Sauro
APPLIED THERMAL ENGINEERING, 2019, 158
[43] Experimental Investigations for Start Up and Maximum Heat Load of Closed Loop Pulsating Heat Pipe
Sarangi, R. K.
Rane, M. V.
CHEMICAL, CIVIL AND MECHANICAL ENGINEERING TRACKS OF 3RD NIRMA UNIVERSITY INTERNATIONAL CONFERENCE ON ENGINEERING (NUICONE2012), 2013, 51 : 683 - 687
[44] Visualization study on start-up characteristics of a loop heat pipe with a carbon fiber capillary wick
Zhang, Yixue
Luan, Tao
Jiang, Haolin
Liu, Junyu
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2021, 169
[45] EFFECTS OF SURFACE WETTING CHARACTERISTICS ON START-UP PERFORMANCE OF AN OSCILLATING HEAT PIPE
Hao, Tingting
Ma, Xuehu
Lan, Zhong
PROCEEDINGS OF THE ASME 5TH INTERNATIONAL CONFERENCE ON MICRO/NANOSCALE HEAT AND MASS TRANSFER, 2016, VOL 1, 2016,
[46] Investigation on start-up and thermal performance of the single-loop pulsating heat pipe with variable diameter
Wang, Jiansheng
Pan, Yu
Liu, Xueling
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2021, 180
[47] Start-Up and Operation of a 3D Hybrid Pulsating Heat Pipe on Board a Sounding Rocket
Mameli, Mauro
Piacquadio, Stefano
Viglione, Alessandro Simone
Catarsi, Andrea
Bartoli, Carlo
Marengo, Marco
Di Marco, Paolo
Filippeschi, Sauro
MICROGRAVITY SCIENCE AND TECHNOLOGY, 2019, 31 (03) : 249 - 259
[48] Start-Up and Operation of a 3D Hybrid Pulsating Heat Pipe on Board a Sounding Rocket
Mauro Mameli
Stefano Piacquadio
Alessandro Simone Viglione
Andrea Catarsi
Carlo Bartoli
Marco Marengo
Paolo Di Marco
Sauro Filippeschi
Microgravity Science and Technology, 2019, 31 : 249 - 259
[49] START-UP AND TRANSIENT BEHAVIOR OF AN OSCILLATING HEAT PIPE
Paudel, Sagar Babu
Michna, Gregory J.
PROCEEDINGS OF THE ASME 13TH INTERNATIONAL CONFERENCE ON NANOCHANNELS, MICROCHANNELS, AND MINICHANNELS, 2015, 2015,
[50] Start-up, heat transfer and flow characteristics of silicon-based micro pulsating heat pipes
Qu, Jian
Wu, Huiying
Cheng, Ping
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2012, 55 (21-22) : 6109 - 6120

← 1 2 3 4 5 →