Structural analysis of nanocomposites based on HDPE/EPDM blends

被引:1
|
作者
Zitzumbo, R
Alonso, S
Avalos, F
Ortíz, JC
López-Manchado, MA
Arroyo, M
机构
[1] CSIC, Inst Polymer Sci & Technol, Madrid 28006, Spain
[2] CIATEC, Leon 37545, Spain
[3] Univ Autonoma Coahuila, Saltillo 25000, Coahuila, Mexico
关键词
morphology; nanocomposites; rheological behavior;
D O I
暂无
中图分类号
O6 [化学];
学科分类号
0703 ;
摘要
Intercalated and exfoliated nanocomposites based on HDPE and EPDM blends with an organoclay have been obtained through the addition of EPDM-g-MA as a compatibilizer. The combined effect of clay and EPDM-g-MA on the rheological behaviour is very noticeable with a sensible increase in viscosity which suggests the formation of a structural net of percolation induced by the presence of intercalated and exfoliated silicate layer. As deduced from rheological studies, a morphology based on nanostructured micro-domains dispersed in HDPE continuous phase is proposed for EPDM/HDPE blend nanocomposites. XRD and SEM analysis suggest that two different transport phenomena take simultaneously place during the intercalation process in the melt. One due to diffusion of HDPE chains into the tactoid and the other to diffusion of EPDM-g-MA into the silicate galleries.
引用
收藏
页码:331 / 336
页数:6
相关论文
共 50 条
  • [31] Polymer Blends Based on HDPE and LDPE.
    Wicke, Werner
    Plastverarbeiter, 1980, 31 (09): : 537 - 540
  • [32] Development of Isotropic Compatible HDPE/PP Blends for Structural Applications
    Zahran, Rouchdy R.
    El-Latif, Mona Mahmoud Abd
    Konsowa, Abd El-Aziz H.
    Awwad, Marwa
    JOURNAL OF APPLIED POLYMER SCIENCE, 2010, 115 (03) : 1407 - 1418
  • [33] ELASTOMER NANOCOMPOSITES BASED ON BR/EPDM/ORGANOCLAY
    Kharazmkia, M.
    Naderi, G.
    Ghoreishy, M. H. R.
    Shokoohi, S.
    RUBBER CHEMISTRY AND TECHNOLOGY, 2013, 86 (02): : 299 - 312
  • [34] Development and characterisation of HDPE/EPDM-g-TMEVS blends for mechanical and morphological properties for engineering applications
    V. C. Divya
    V. V. Pattanshetti
    R. Suresh
    R. R. N. Sailaja
    Journal of Polymer Research, 2013, 20
  • [35] Effect of EPDM on morphology, mechanical properties, crystallization behavior and viscoelastic properties of iPP plus HDPE blends
    Vranjes, Nina
    Rek, Vesna
    MACROMOLECULAR SYMPOSIA, 2007, 258 : 90 - 100
  • [36] Rheological study on PP/HDPE blends compatibilized by EPDM with droplet morphology using Lee and Park model
    Liao, Hua-yong
    Guo, Jian-hua
    Liu, Chun-lin
    Tao, Guo-liang
    POLYMER BULLETIN, 2025,
  • [37] A study of the thermal and mechanical properties of electron beam irradiated HDPE/EPDM blends in the presence of triallyl cyanurate
    Shin, Bum-Sik
    Seo, Dong-Kwon
    Kim, Hyun-Bin
    Jeun, Joon-Pyo
    Kang, Phil-Hyun
    JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY, 2012, 18 (01) : 526 - 531
  • [38] Development and characterisation of HDPE/EPDM-g-TMEVS blends for mechanical and morphological properties for engineering applications
    Divya, V. C.
    Pattanshetti, V. V.
    Suresh, R.
    Sailaja, R. R. N.
    JOURNAL OF POLYMER RESEARCH, 2013, 20 (02)
  • [39] EPDM IN POLYMER BLENDS
    OMAHONEY, JF
    RUBBER AGE, 1970, 102 (03): : 47 - &
  • [40] Characterization of HDPE/MMT-Based Nanocomposites
    Devi, S. H. Kameshwari
    Shashidhara, G. M.
    Ghosh, A. K.
    COMPOSITE INTERFACES, 2010, 17 (2-3) : 217 - 222