Electrical and Mechanical Properties of PA66/PPE Blend Containing MWCNT

被引：4
|
作者：
Lee, Young Sil [1 ]
Lee, Seul Ki [1 ]
Kim, Jae Hyung [1 ]
Yoon, Kwan Han [1 ]
机构：
[1] Kumoh Natl Inst Technol, Ind Acad Cooperat Fdn, Dept Environm Engn, Dept Chem Engn, 1 Yangho Dong, Gumi 39177, South Korea
来源：
POLYMER-KOREA | 2019年 / 43卷 / 03期
关键词：
polyamide; 66; poly(2,6-dimethyl-4,4-phenylene ether); blend; mechanical properties; electrical properties; CARBON NANOTUBES; FRACTURE;
D O I：
10.7317/pk.2019.43.3.331
中图分类号：
O63 [高分子化学（高聚物）];
学科分类号：
070305 ; 080501 ; 081704 ;
摘要：
Polyamide 66 (PA66)/poly(2,6-dimethyl-4,4-phenylene ether) (PPE) blends containing multi-walled carbon nanotube (MWCNT) were prepared. PPE-L and PPE-H having different melt viscosity were used. During blending, 3 phr of styrene-ethylene-butadiene-styrene (SEBS) as an impact modifier and 2 phr of MWCNT were added. The PA66/PPE (80/20) and (60/40) blends were considerable in teens of the electrical and mechanical properties. The mechanical properties of PA66/PPE-L (80/20) blends were increased up to 2 phr MWCNT and decreased at the higher composition of MWCNT due to the aggregation of MWCNT. The surface resistivity of PA66/PPE-L (80/20) blends was decreased with the MWCNT composition, and showed the percolation threshold at 2 phr MWCNT.
引用
收藏
页码：331 / 336
页数：6
相关论文
共 50 条
  • [1] The Influence of the Blend Ratio in PA6/PA66/MWCNT Blend Composites on the Electrical and Thermal Properties
    Krause, Beate
    Kroschwald, Lisa
    Poetschke, Petra
    POLYMERS, 2019, 11 (01)
  • [2] Deformation of dispersed PA66 phase in drawn PA66/SAN blend
    Wenjing Li
    Alois K. Schlarb
    Martin Weber
    Michael Evstatiev
    Polymer Bulletin, 2010, 64 : 483 - 495
  • [3] Deformation of dispersed PA66 phase in drawn PA66/SAN blend
    Li, Wenjing
    Schlarb, Alois K.
    Weber, Martin
    Evstatiev, Michael
    POLYMER BULLETIN, 2010, 64 (05) : 483 - 495
  • [4] Mechanical and tribological properties of PA66/PPS blend.: III.: Reinforced with GF
    Chen, Zhaobin
    Liu, Xujun
    Lu, Renguo
    Li, Tongsheng
    JOURNAL OF APPLIED POLYMER SCIENCE, 2006, 102 (01) : 523 - 529
  • [5] Mechanical and tribological properties of PA66/PPS blend. III. Reinforced with GF
    Chen, Zhaobin
    Liu, Xujun
    Lü, Renguo
    Li, Tongsheng
    Journal of Applied Polymer Science, 2006, 102 (01): : 523 - 529
  • [6] Mechanical and tribological properties of PA66/PPS blend.: II.: Filled with PTFE
    Chen, Zhaobin
    Liu, Xujun
    Li, Tongsheng
    Lu, Renguo
    JOURNAL OF APPLIED POLYMER SCIENCE, 2006, 101 (02) : 969 - 977
  • [7] Hybridization effect of fibers on mechanical properties of PA66/PP blend-based thermoplastic composites
    Lingesh, B. V.
    Kumar, B. N. Ravi
    Rudresh, B. M.
    Reddappa, H. N.
    ADVANCED COMPOSITES AND HYBRID MATERIALS, 2018, 1 (04) : 766 - 776
  • [8] Hybridization effect of fibers on mechanical properties of PA66/PP blend-based thermoplastic composites
    B. V. Lingesh
    B. N. Ravi Kumar
    B. M. Rudresh
    H. N. Reddappa
    Advanced Composites and Hybrid Materials, 2018, 1 : 766 - 776
  • [9] Effect of short glass fibers on Mechanical properties of Polyamide66 and Polypropylene (PA66/PP) thermoplastic blend composites
    Lingesh, B. V.
    Rudresh, B. M.
    Ravikumar, B. N.
    INTERNATIONAL CONFERENCE ON ADVANCES IN MANUFACTURING AND MATERIALS ENGINEERING (ICAMME 2014), 2014, 5 : 1231 - 1240
  • [10] The influence of epoxy resin on the morphological and rheological properties of PET/PA66 blend
    Hamed Khoshnevis
    Ali Zadhoush
    Rheologica Acta, 2012, 51 : 467 - 480
12345