Simulated One Pass Listmode for Fully 3D Image Reconstruction of Compton Camera Data

Image reconstruction for Compton camera data can be problematic due to the common trade-off between physically realistic models and speed of computation. In this investigation a novel method of system matrix calculation - Simulated One-Pass Listmode (SOPL) - is extended to incorporate Compton camera data. The method reduces the Cone Surface Response for the Compton camera to an ensemble of Sid don-rays and is conducted in two stages. As part of the ENVISION project for monitoring in hadron therapy, a continuous-crystal Lanthanum Bromide Compton camera has been developed and experimental data acquired. Continuous detection geometries are particularly susceptible to variation in both spatial and spectral resolution over the detection volume and so accurate yet flexible models of detection are particularly important. The SOPL-Compton method was applied via the Maximum Likelihood - Expectation Maximization algorithm to experimental data taken using the prototype device. In this investigation, detection modeling using SOPL-Compton in a two interaction Compton camera is validated and the incorporation of a shift-invariant image-space model confirmed as a useful modification to reduce computational expense. Finally experimental data taken using the prototype LaBr3 Compton camera provide confirmation of the SOPL-Compton approach to system modeling. Results indicate a fast, flexible and accurate algorithm that can easily be extended to alternate and novel detection geometries.