Research on the Inlet Pressure Accurate Control Method of the Nozzle for the Single-Jet Nozzle Tester of Aero Engine

被引:0
|
作者
Wang, Yemu [1 ]
Wang, Jie [1 ]
机构
[1] Shenyang Univ Technol, Mech Engn Inst, Shenyang, Peoples R China
来源
关键词
Closed loop pressure control; PID control; Nozzle; Proportional relief valve; Fixed throttle hole;
D O I
10.4028/www.scientific.net/AMR.468-471.980
中图分类号
TP [自动化技术、计算机技术];
学科分类号
0812 ;
摘要
This paper introduces the closed loop pressure computer control system which is suitable for the environment of kerosene medium. The system can satisfy the technical requirements of the pressure regulation in the test of the single -jet nozzle of aero engine, the pressure can be accurately controlled and its control precision is within +/- 0.01 MPa. It indicates the principle and composition of the hydraulic system and computer measurement and control system. The paper introduces the design method and treatment process of the key technology, which includes the use of a proportional relief valve and a fixed throttle hole in hydraulic system, the use of PID control in closed loop control system, the use of high precision sensor and measurement method by grade in measuring system and the use of 24V precision steady voltage source. In the same time it indicates the actual application of the closed loop pressure control system.
引用
收藏
页码:980 / 983
页数:4
相关论文
共 50 条
  • [31] Research of nozzle pressure control system based on air pressure 3d printer
    Liu, Huanbao
    Zhou, Huixing
    Wang, Xuhan
    Yu, Hejie
    Liu, Xiaolong
    2017 29TH CHINESE CONTROL AND DECISION CONFERENCE (CCDC), 2017, : 6750 - 6754
  • [32] The Measurement of the Velocity Outside the High Pressure Water Jet and Abrasive Water Jet Nozzle Based on the Energy Transfer Method
    Hou, R. G.
    Huang, C. Z.
    Zhu, H. T.
    Niu, Z. W.
    SURFACE FINISHING TECHNOLOGY AND SURFACE ENGINEERING II, 2010, 135 : 361 - +
  • [33] Research on the Characteristic of Pressure Oscillation Amplitudes of Submerged Steam Jet Through Double-Holes Nozzle
    Wu, Xin-Zhuang
    Huang, Chen-Xi
    Chen, Wei-Xiong
    Wang, Ying-Chun
    Wang, Lu-Tao
    Chong, Dao-Tong
    Yan, Jun-Jie
    Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 2019, 40 (04): : 851 - 856
  • [34] Research on Multiphase Flow and Nozzle Wear in a High-Pressure Abrasive Water Jet Cutting Head
    Zou, Xiang
    Fu, Liandong
    Wu, Lin
    Zuo, Wenhao
    MACHINES, 2023, 11 (06)
  • [35] RESEARCH ON THE FRACTOR MECHANIC ANALYSIS METHOD FOR REACTOR PRESSURE VESSEL NOZZLE COENER LAW
    Shen Rui
    Cao Ming
    He Yinbiao
    Tao Hongxin
    PROCEEDINGS OF THE 25TH INTERNATIONAL CONFERENCE ON NUCLEAR ENGINEERING, 2017, VOL 2, 2017,
  • [36] Research on the failure mechanism in the convergent section of an aero-engine's adjustable nozzle under multi-field coupling analyses
    Miao, Haoming
    Li, Chao
    Lao, Linjian
    Hong, Jie
    Ma, Yanhong
    ENGINEERING FAILURE ANALYSIS, 2025, 169
  • [37] Research on jet structure and the virtual nozzle model for high-pressure hydrogen leakage from rectangular nozzles
    Shen, Jinghua
    Gao, Wei
    Sun, Yi
    Zhang, Kai
    JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES, 2025, 94
  • [38] An investigation into the cracking of platinum aluminide coated directionally solidified CM247 LC high pressure nozzle guide vanes of an aero engine
    Balam, S. S. K.
    Tamilselvi, M.
    Mondal, A. K.
    Rajendran, R.
    ENGINEERING FAILURE ANALYSIS, 2018, 94 : 24 - 32
  • [39] Visualization research on influence of ambient pressure on CNG jet characteristics of gas injector with outward-opening nozzle
    Zhao, Jianhui
    Liu, Weilong
    Grekhov, Leonid
    FUEL, 2019, 257
  • [40] Vibration test method of aero-engine 3D printing pre-swirl nozzle based on equivalent installation stiffness
    Yujie Zhao
    Yeda Lian
    Lei Li
    Xu Gong
    Xianghai Chai
    Wei Liu
    Journal of Mechanical Science and Technology, 2023, 37 : 617 - 630