Effects of acetic acid on microstructure and electrochemical properties of nano cerium oxide films coated on AA7020-T6 aluminum alloy

被引：1

作者：

Hasannejad, H. ^{[1
]}

Shahrabi, T. ^{[1
]}

Aliofkhazraei, M. ^{[1
]}

机构：

[1] Tarbiat Modares Univ, Dept Mat Engn, Fac Engn, Tehran, Iran

来源：

RARE METALS | 2009年 / 28卷 / 01期

关键词：

nano cerium oxide films; acetic acid; aluminum alloy; electrochemical property; microstructure; GEL; DEPOSITION; CONVERSION; COATINGS;

D O I：

10.1007/s12598-009-0019-1

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Nano cerium oxide films were applied on AA7020-T6 aluminum alloy and the effects of acetic acid concentration on the microstructure and electrochemical properties of the coated samples were investigated by using scanning electron microscopy (SEM), X-ray diffraction (XRD), and potentiodynamic polarization methods. It has been found that by increasing the acetic acid/CeCl3 center dot 7H(2)O molar ratio, high uniform and crack-free films with well-developed grains were obtained and grain sizes of the films decreased. Elimination of cracks and decreasing grain size of the nano cerium oxide films caused corrosion resistance to increase.

引用

页码：98 / 101

页数：4

共 42 条

[11] Effect of Friction Stir Welding Process Parameters on Microstructure and Mechanical Properties of Dissimilar AA6061-T6 and AA7075-T6 Aluminum Alloy Joints
Saravanan V.
Rajakumar S.
Muruganandam A.
Metallography, Microstructure, and Analysis, 2016, 5 (6) : 476 - 485
[12] Microstructure and mechanical properties of ultrasonic spot welding of AA7075-T6 and A380 casting aluminum alloy
Li, Yuan
Chen, Jian
Agrawal, Priyanshi
Feng, Zhili
JOURNAL OF MANUFACTURING PROCESSES, 2024, 110 : 126 - 133
[13] Correlation between precipitate microstructure and mechanical properties in AA7075-T6 aluminum alloy friction stir welded joints
Farzadi, A.
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2017, 48 (02) : 151 - 162
[14] Effect of welding parameters on microstructure and mechanical properties of aluminum alloy AA6082-T6 friction stir spot welds
Aydin, H.
Tuncel, O.
Umur, Y.
Tutar, M.
Bayram, A.
INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2017, 24 (03) : 215 - 227
[15] The Influence of Tool Geometry on the Mechanical Properties and the Microstructure of AA6061-T6 Aluminum Alloy Friction Stir Spot Welding
Alkhafaji, Amir
Camas, Daniel
Lopez-Crespo, Pablo
Al-Asadi, Hayder
MATERIALS, 2023, 16 (11)
[16] Effects of Oxide Fragments on Microstructure and Mechanical Properties of AA6061 Aluminum Alloy Tube Fabricated by Thermomechanical Consolidation of Machining Chips
Zhang, Zhen
Liang, Jiamiao
Xia, Tian
Xie, Yuehuang
Chan, Sammy Lap Ip
Wang, Jun
Zhang, Deliang
MATERIALS, 2023, 16 (04)
[17] Nanostructural and electrochemical characteristics of cerium oxide thin films deposited on AA5083-H321 aluminum alloy substrates by dip immersion and sol-gel methods
Hasannejad, H.
Aliofkhazraei, M.
Shanaghi, A.
Shahrabi, T.
Sabour, A. R.
THIN SOLID FILMS, 2009, 517 (17) : 4792 - 4799
[18] Effect of shoulder diameter to pin diameter ratio on microstructure and mechanical properties of dissimilar friction stir welded AA2024-T6 and AA7075-T6 aluminum alloy joints
Saravanan, V.
Rajakumar, S.
Banerjee, Nilotpal
Amuthakkannan, R.
International Journal of Advanced Manufacturing Technology, 2016, 87 (9-12): : 3637 - 3645
[19] Microstructure and mechanical properties of 6082-T6 aluminum alloy-zinc coated steel braze-welded joints
Mitelea, Ion
Craciunescu, Corneliu Marius
Lucian, Ciprian Pavel
Utu, Ion Dragos
MATERIALS TESTING, 2021, 63 (08) : 721 - 727
[20] Effect of shoulder diameter to pin diameter ratio on microstructure and mechanical properties of dissimilar friction stir welded AA2024-T6 and AA7075-T6 aluminum alloy joints
V. Saravanan
S. Rajakumar
Nilotpal Banerjee
R. Amuthakkannan
The International Journal of Advanced Manufacturing Technology, 2016, 87 : 3637 - 3645

← 1 2 3 4 5 →