Fatigue crack propagation in austeno-ferritic duplex stainless steel 22 Cr5Ni

被引:44
|
作者
Iacoviello, F [1 ]
Boniardi, M
La Vecchia, GM
机构
[1] Univ Cassino, Dipartimento Meccan Strutture Ambiente & Terr, Cassino, FR, Italy
[2] Politecn Milan, Dipartimento Meccan, I-20133 Milan, Italy
[3] Univ Brescia, Dipartimento Ingn Meccan, I-25060 Brescia, Italy
关键词
fatigue crack propagation; duplex stainless steel; 475 degrees C embrittlement; sigma phase;
D O I
10.1016/S0142-1123(99)00076-6
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Fatigue crack propagation in Duplex Stainless Steels (DSSs) is strongly affected by microstructure and therefore by the choice of the steel grade or by the heat treatment conditions. In the present work fatigue behaviour of 22 Cr 5 Ni DSS has been investigated both after solution annealing and after different embrittling thermal cycles. Fatigue tests have been done in air considering the influence of both the stress ratio and the loading direction. Roughness analysis has been performed to point out a relationship between fracture morphology and fatigue crack propagation data and it shows that fracture surface roughness influence on fatigue crack advancing depends on loading conditions. A scanning electron microscope (SEM) fracture surface analysis has been performed to investigate the fatigue crack propagation micro mechanisms in 22 Cr 5 Ni duplex stainless steel. (C) 1999 Published by Elsevier Science Ltd. All rights reserved.
引用
收藏
页码:957 / 963
页数:7
相关论文
共 50 条
  • [21] A simple criterion for occurrence of intergranular fatigue crack propagation in a ferritic stainless steel
    Hashimoto, S
    Kaneko, Y
    INTERGRANULAR AND INTERPHASE BOUNDARIES IN MATERIALS, IIB98, 1999, 294-2 : 685 - 688
  • [22] Short crack growth and fatigue life in austenitic-ferritic duplex stainless steel
    Polák, J
    Zezulka, P
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2005, 28 (10) : 923 - 935
  • [23] Sympathetic nucleation of austenite in a Fe-22Cr-5Ni duplex stainless steel
    Chen, C. Y.
    Yen, H. W.
    Yang, J. R.
    SCRIPTA MATERIALIA, 2007, 56 (08) : 673 - 676
  • [24] EFFECT OF ENVIRONMENT ON FATIGUE CRACK-PROPAGATION FOR DUPLEX STAINLESS-STEEL
    MASUDA, H
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1987, 73 (04): : S346 - S346
  • [25] FATIGUE CRACK-PROPAGATION IN A DUPLEX AUSTENITE FERRITE STAINLESS-STEEL
    RICKS, RA
    NEWCOMB, SB
    INSTITUTE OF PHYSICS CONFERENCE SERIES, 1983, (68): : 307 - 310
  • [26] Strain accumulation during microstructurally small fatigue crack propagation in bcc Fe-Cr ferritic stainless steel
    Malitckii, E.
    Remes, H.
    Lehto, P.
    Yagodzinskyy, Y.
    Bossuyt, S.
    Hanninen, H.
    ACTA MATERIALIA, 2018, 144 : 51 - 59
  • [27] Impact of Thermomechanical Fatigue on Microstructure Evolution of a Ferritic-Martensitic 9 Cr and a Ferritic, Stainless 22 Cr Steel
    Kuhn, Bernd
    Lopez Barrilao, Jennifer
    Fischer, Torsten
    APPLIED SCIENCES-BASEL, 2020, 10 (18):
  • [28] Measurements of secondary phases content in a 22Cr 5Ni duplex stainless steel
    Calliari, I
    Magrini, M
    Ramous, E
    PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY, 2005, 42 (02): : 74 - +
  • [29] Fatigue damage in austenitic-ferritic duplex stainless steel
    Polák, J
    Kruml, T
    Degallaix, S
    Nilsson, JO
    PROGRESS IN MECHANICAL BEHAVIOUR OF MATERIALS (ICM8), VOL 1: FATIGUE AND FRACTURE, 1999, : 47 - 52
  • [30] FATIGUE-CRACK PROPAGATION MECHANISMS IN A THERMALLY AGED DUPLEX STAINLESS-STEEL
    MARROW, TJ
    KING, JE
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1994, 183 (1-2): : 91 - 101