Fatigue crack propagation in austeno-ferritic duplex stainless steel 22 Cr5Ni

被引：44

作者：

Iacoviello, F ^{[1
]}

Boniardi, M

La Vecchia, GM

机构：

[1] Univ Cassino, Dipartimento Meccan Strutture Ambiente & Terr, Cassino, FR, Italy

[2] Politecn Milan, Dipartimento Meccan, I-20133 Milan, Italy

[3] Univ Brescia, Dipartimento Ingn Meccan, I-25060 Brescia, Italy

来源：

INTERNATIONAL JOURNAL OF FATIGUE | 1999年 / 21卷 / 09期

关键词：

fatigue crack propagation; duplex stainless steel; 475 degrees C embrittlement; sigma phase;

D O I：

10.1016/S0142-1123(99)00076-6

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Fatigue crack propagation in Duplex Stainless Steels (DSSs) is strongly affected by microstructure and therefore by the choice of the steel grade or by the heat treatment conditions. In the present work fatigue behaviour of 22 Cr 5 Ni DSS has been investigated both after solution annealing and after different embrittling thermal cycles. Fatigue tests have been done in air considering the influence of both the stress ratio and the loading direction. Roughness analysis has been performed to point out a relationship between fracture morphology and fatigue crack propagation data and it shows that fracture surface roughness influence on fatigue crack advancing depends on loading conditions. A scanning electron microscope (SEM) fracture surface analysis has been performed to investigate the fatigue crack propagation micro mechanisms in 22 Cr 5 Ni duplex stainless steel. (C) 1999 Published by Elsevier Science Ltd. All rights reserved.

引用

页码：957 / 963

页数：7

共 50 条

[1] Experimental characterization of short fatigue crack kinetics in an austeno-ferritic duplex steel
Alvarez-Armas, I.
Knobbe, H.
Marinelli, M. C.
Balbi, M.
Herenu, S.
Krupp, U.
11TH INTERNATIONAL CONFERENCE ON THE MECHANICAL BEHAVIOR OF MATERIALS (ICM11), 2011, 10 : 1491 - 1496
[2] Integranular corrosion susceptibility analysis in austeno-ferritic (duplex) stainless steels
Iacoviello, F.
Di Cocco, V.
Franzese, E.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2018, 41 (04) : 739 - 748
[3] Effect of residual stresses on individual phase mechanical properties of austeno-ferritic duplex stainless steel
Dakhlaoui, R.
Baczmanski, A.
Braham, C.
Wronski, S.
Wierzbanowski, K.
Oliver, E. C.
ACTA MATERIALIA, 2006, 54 (19) : 5027 - 5039
[4] Effect of temperature on sintered austeno-ferritic stainless steel microstructure
Múnez, C.J.
Utrilla, M.V.
Ureña, A.
1600, Elsevier BV (463): : 1 - 2
[5] Integranular corrosion susceptibility analysis in austeno-ferritic (duplex) stainless steels
Iacoviello, Francesco
Di Cocco, Vittorio
D'Agostino, Laura
XXIV ITALIAN GROUP OF FRACTURE CONFERENCE, 2017, 2017, 3 : 276 - 282
[6] Effect of temperature on sintered austeno-ferritic stainless steel microstructure
Munez, C. J.
Utrilla, M. V.
Urena, A.
JOURNAL OF ALLOYS AND COMPOUNDS, 2008, 463 (1-2) : 552 - 558
[7] 22Cr5Ni duplex and 25Cr7Ni superduplex stainless steel: Hydrogen influence on fatigue crack propagation resistance
Di Cocco, V.
Franzese, E.
Iacoviello, F.
Natali, S.
ENGINEERING FRACTURE MECHANICS, 2008, 75 (3-4) : 705 - 714
[8] Internal stress relief and microstructural evolution by ultrasonic treatment of austeno-ferritic 2205 duplex stainless steel
Zohrevand, Milad
Aghaie-Khafri, Mehrdad
Forouzan, Farnoosh
Vuorinen, Esa
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 815
[9] ANALYSIS OF PASSIVE FILMS ON AUSTENO-FERRITIC STAINLESS-STEEL BY MICROSCOPIC ELLIPSOMETRY
SUGIMOTO, K
MATSUDA, S
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1983, 130 (12) : 2323 - 2329
[10] Intergranular corrosion susceptibility analysis of an austeno-ferritic stainless steel 22 Cr 5 Ni in H2SO4 solution by means of potentiokinetic reactivation tests
Iacoviello, F.
Jaresova, L.
Dagbert, C.
Jerome, M.
Galland, J.
Metallurgia Italiana, 1999, 91 (05): : 65 - 70

← 1 2 3 4 5 →