Truss girder joint with a large diameter mechanical fastener

被引：0

作者：

Pavkovic, Krunoslav ^{[1
]}

Haiman, Miljenko ^{[2
]}

Mestrovic, Mladen ^{[3
]}

Rajcic, Vlatka ^{[3
]}

机构：

[1] Tehn Veleuciliste Zagrebu Graditeljski Odjel, Zagreb, Croatia

[2] Sveuciliste Zagrebu, Arhitektonski Fak, Zagreb, Croatia

[3] Sveuciliste Zagrebu, Gradevinski Fak, Zagreb, Croatia

来源：

GRADEVINAR | 2013年 / 65卷 / 10期

关键词：

truss girder joint; non-linear analysis; large diameter fastener; glued-in rods. UMAT subroutine;

D O I：

暂无

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

A joint with a large diameter fastener for connecting large span truss girder nodes is presented in the paper. The joint strength and slip modulus were analysed by means of experimental testing and the finite element method. The experimental testing was conducted on four truss girders with the proposed joint. The nonlinear truss girder model analysis, was conducted using the Abaqus/CAE software with the UMAT subroutine. The results obtained and analysed according to EN 21512, show that the proposed joint has a large strength and slip modulus, and that it can be used for large-span truss girders. The results also show that the equation for embedding compression strength according to EC5 should be modified.

引用

页码：869 / 878

页数：10

共 50 条

[41] Numerical investigation on strength of CFRST composite truss girder
Ma, Yinping
Liu, Yongjian
STRUCTURES, 2023, 53 : 253 - 264
[42] Design and FEM Modelling of Steel Truss Girder Joints
Radic, Ivan
Markulak, Damir
Mikolin, Miljana
STROJARSTVO, 2010, 52 (02): : 125 - 135
[43] MULTIROW JOINT FASTENER LOAD INVESTIGATION
YEN, SW
COMPUTERS & STRUCTURES, 1978, 9 (05) : 483 - 488
[44] Study on mechanical behavior of cast steel support joint of truss string structure
Du, Xinxi
Liu, Maoqing
Zhao, Hui
Cheng, Xiaoyan
Wang, Jie
Yan, Zhaohuan
Luo, Shunxin
Jianzhu Jiegou Xuebao/Journal of Building Structures, 2013, 34 (11): : 76 - 81
[45] Design and Mechanical Characterisation of a Large Truss Structure for Continuous Manufacturing in Space
Li, Peng
Ning, Hongyang
Yan, Jiayong
Xu, Bo
Li, Hongjian
MATERIALS, 2022, 15 (17)
[46] SEALING PERFORMANCE OF LARGE DIAMETER MECHANICAL SEALS FOR AGITATORS
FUJITA, T
SATO, T
OHDE, T
MIZOE, S
HIRABAYASHI, H
LUBRICATION ENGINEERING, 1992, 48 (09): : 729 - 734
[47] Influence of unloading degrees on the strengthening effect of the main truss members of steel truss girder bridges
Su Q.-T.
Wang S.-Z.
Xue Z.-B.
Zhang C.-L.
Wang Q.
Chen L.
Gongcheng Lixue/Engineering Mechanics, 2019, 36 : 92 - 97and105
[48] Key Erection Techniques for Two-Panel Large Segments of Three-Main-Truss Steel Girder
Chen, Tao
Bridge Construction, 2020, 50 (06) : 8 - 13
[49] Experiments on Large-Diameter Welded Hollow Spherical Joint
陈海忠
朱宏平
熊世树
Journal of Southwest Jiaotong University(English Edition), 2009, 17 (04) : 319 - 324
[50] An Insight to the Dynamic Amplification Factor for Steel Truss Girder Bridge
Parida, S.
Talukdar, S.
INTERNATIONAL JOURNAL OF STEEL STRUCTURES, 2020, 20 (04) : 1341 - 1354

← 1 2 3 4 5 →