Study of the Effect of Tool Wear on Cutting Ti6AI4V Process

被引：1
|
作者：
Yang Shubao [1 ]
Ni Hongchao [1 ]
Zhu Guohui [1 ]
机构：
[1] Anhui Univ Technol, Maanshan 243032, Anhui, Peoples R China
来源：
MATERIAL DESIGN, PROCESSING AND APPLICATIONS, PARTS 1-4 | 2013年 / 690-693卷
关键词：
Titanium Alloy; Tool Wear; Cutting Force; Cutting Temperature; Chip Morphology;
D O I：
10.4028/www.scientific.net/AMR.690-693.2030
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Ti6AI4V alloy is widely used in the aircraft industry, marine and the commercial applications due to its excellent comprehensive properties. However, its poor machinability prevents it from application widely, and the rapid tool wear is one of the key factors. The FEM models of cutting titanium alloy are established. The effect of tool wear on chip morphology, cutting temperature and cutting force are studied. The simulation results show that: the cutting force and cutting temperature will rise with the increase of tool wear. Furthermore, the degree of chip deformation will improve, but the frequency of serrated chip tooth occurred will decrease.
引用
收藏
页码：2030 / 2035
页数：6
相关论文
共 50 条
  • [1] Torsional Fretting Wear of Ti6AI4V Alloys in Saline Solutions
    Lin Xiuzhou
    Cai Zhenbing
    Yi Jinghua
    Cui Xuejun
    Dou Baojie
    Zhu Minhao
    [J]. RARE METAL MATERIALS AND ENGINEERING, 2019, 48 (06) : 1742 - 1748
  • [2] Chip formation in machining Ti6AI4V at extremely high cutting speeds
    Gente, A
    Hoffmeister, HW
    [J]. CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2001, 50 (01) : 49 - 52
  • [3] Powder injection molding of Ti6AI4V alloy
    Qu, Xuanhui
    Guo, Shibo
    Tang, Chunfeng
    Qin, Mingli
    He, Xinbo
    Islam, Syed Humail
    [J]. THERMEC 2006, PTS 1-5, 2007, 539-543 : 2639 - +
  • [4] SEGMENTED CUTTING COEFFICIENT BASED CHATTER MODELING FOR HIGH-SPEED MICROMILLING OF Ti6AI4V
    Singh, Kundan K.
    Kartik, V.
    Singh, Ramesh
    [J]. PROCEEDINGS OF THE ASME 11TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE, 2016, VOL 2, 2016,
  • [5] Kinetics of interfacial reaction in SiCf/Ti6AI4V composites
    Yang, Y. Q.
    Lu, X. H.
    Luo, X.
    Ma, Z. J.
    Li, J. K.
    Wen, Q.
    Chen, Y.
    [J]. 2006 BIMW: 2006 BEIJING INTERNATIONAL MATERIALS WEEK, PTS 1-4: MAGNESIUM, 2007, 546-549 : 1627 - +
  • [6] EBW and LBW of Additive Manufactured Ti6AI4V Products
    Tavlovich, B.
    Shirizly, A.
    Katz, R.
    [J]. WELDING JOURNAL, 2018, 97 (06) : 179S - 190S
  • [7] Experimental Study on Tool Wear in Cutting Titanium Alloy Ti6Al4V
    Yuan, Yuefeng
    Chen, Wuyi
    Zhang, Wenying
    [J]. ADVANCED MATERIALS, PTS 1-4, 2011, 239-242 : 2011 - +
  • [8] Study of electrochemical corrosion of the welded joint Ti6AI4V alloy in selected environments
    Iwaniak, Aleksander
    Sozanska, Maria
    Koszembar, Rafal
    Carski, Lukasz
    [J]. OCHRONA PRZED KOROZJA, 2014, 57 (05): : 204 - 204
  • [9] SURFACE ANALYSES OF NITROGEN ION IMPLANTED Ti6Ai4V ALLOY
    ZHAO Guozhen YU Jian Shanghai Research Institute of Meterials
    [J]. Acta Metallurgica Sinica(English Letters), 1989, (12) : 409 - 415
  • [10] Load and environmental effects on the corrosion behavior of a Ti6AI4V alloy
    Baragetti, Sergio
    Medolago, Alessandro
    [J]. ADVANCES IN FRACTURE AND DAMAGE MECHANICS XI, 2013, 525-526 : 501 - 504
12345