Bended Differential Transmission Line Using Compensation Inductance for Common-Mode Noise Suppression

被引：51
|
作者：
Chang, Chia-Han [1 ]
Fang, Ruei-Ying [1 ]
Wang, Chun-Long [1 ]
机构：
[1] Natl Taiwan Univ Sci & Technol, Taipei 106, Taiwan
来源：
IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY | 2012年 / 2卷 / 09期
关键词：
Common-mode noise; compensation inductance; coupled line; differential transmission line;
D O I：
10.1109/TCPMT.2012.2192439
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this paper, a bended differential transmission line using a compensation inductance is proposed to efficiently suppress the common-mode noise. The bended differential transmission line using the compensation inductance can then be implemented by the bended differential transmission line using the short-circuited coupled line. It has been shown that the bended differential transmission line using the short-circuited coupled line can greatly reduce the mode conversion from -5.47 to -14.75 dB, and the time-domain-through common-mode noise from 0.068 to 0.02 V as compared with the bended differential transmission line using the right-angle bend. In order to verify the simulation results, measurement is done in the frequency and time domains where the measurement results are in good agreement with the simulation results.
引用
收藏
页码：1518 / 1525
页数：8
相关论文
共 50 条
  • [21] A Differential SISPSL Branch-Line Coupler With Common-Mode Suppression Using Compensated Stub
    Liu, Jia
    Wang, Yongqiang
    Ma, Kaixue
    An, Wenxing
    IEEE TRANSACTIONS ON CIRCUITS AND SYSTEMS II-EXPRESS BRIEFS, 2023, 70 (02) : 511 - 515
  • [22] Asymmetric coupled lines for common-mode noise suppression in bent differential lines
    Lim, J.
    Lee, S.
    Oh, S.
    Jeong, J.
    Lee, J.
    ELECTRONICS LETTERS, 2019, 55 (03) : 135 - 136
  • [23] Differential-to-Common Mode Conversion Noise Suppression With Unit Cell EBG Structure for Bended Differential Lines
    Oh, Sangyeol
    Shin, Beomsoo
    Lim, Jaehyuk
    Lee, Seungjin
    Lee, Jaehoon
    2016 IEEE ELECTRICAL DESIGN OF ADVANCED PACKAGING AND SYSTEMS (EDAPS) SYMPOSIUM, 2016, : 103 - 105
  • [24] Common-mode noise suppression by recovery charge difference compensation in a balanced bridgeless PFC
    Shirakawa K.
    Arai S.
    Tokumasu A.
    Taki H.
    Shimizu T.
    IEEJ Transactions on Industry Applications, 2019, 139 (11) : 916 - 923
  • [25] Power-line channel modeling for common-mode signal transmission/suppression
    Tsuzuki, S
    Yoshida, M
    Yamada, Y
    2005 International Symposium on Power Line Communications and Its Applications, 2005, : 210 - 214
  • [26] Common mode conversion noise suppression using L-Pad with asymmetric coupled lines on bended differential lines
    Lee, Seungjin
    Lim, Jaehyuk
    Oh, Sangyeol
    Lee, Jaehoon
    Kim, Yonghoon
    Oh, Dan
    2018 JOINT IEEE INTERNATIONAL SYMPOSIUM ON ELECTROMAGNETIC COMPATIBILITY AND 2018 IEEE ASIA-PACIFIC SYMPOSIUM ON ELECTROMAGNETIC COMPATIBILITY (EMC/APEMC), 2018, : 1212 - 1215
  • [27] A Wide Differential Passband Filter with Common-Mode Suppression Property Based on Left Handed Metamaterial Transmission Line
    Attar, Amir
    Joodaki, Mojtaba
    PROCEEDINGS OF THE 2016 INTERNATIONAL SYMPOSIUM ON ELECTROMAGNETIC COMPATIBILITY - EMC EUROPE, 2016, : 581 - 585
  • [28] Compact balanced bandpass filter using interdigital line resonator with high common-mode noise suppression
    Chen, Jianzhong
    Chen, Jia
    MICROWAVE AND OPTICAL TECHNOLOGY LETTERS, 2012, 54 (04) : 918 - 920
  • [29] A Metamaterial-typed Differential Transmission Line with Broadband Common-Mode Suppresssion
    Tsai, Chung-Hao
    Wu, Tzong-Lin
    EMC EUROPE: 2009 INTERNATIONAL SYMPOSIUM ON ELECTROMAGNETIC COMPATIBILITY, 2009, : 68 - 71
  • [30] Reduction of common-mode excitation on a differential transmission line bend by imbalance control
    Matsushima, Tohlu
    Wada, Osami
    IEICE COMMUNICATIONS EXPRESS, 2014, 3 (10): : 295 - 299
12345