Modeling and simulation of revolute joint with clearance in planar multi-body systems

被引：27
|
作者：
Wang, Xupeng [1 ]
Liu, Geng [1 ]
机构：
[1] Northwestern Polytech Univ, Sch Mech Engn, Xian 710072, Shanxi, Peoples R China
来源：
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY | 2015年 / 29卷 / 10期
关键词：
Clearance joints; Improved contact force model; Friction effect; Multi-body systems; CONTACT FORCE MODEL; MECHANICAL SYSTEMS; DYNAMIC-ANALYSIS;
D O I：
10.1007/s12206-015-0905-4
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
An improved nonlinear elastic-damping contact force model, based on accounting for the axial dimension of bearing and journal, energy dissipation during contact process and the nonlinear power exponent from material, is established to evaluate the contact force of revolute joint with clearance. The friction effect was also determined using the modified Coulomb friction model. Numerical simulation was carried out to discuss the influence of clearance size on the kinematic and dynamic characteristics of the planar slider-crank mechanism, which has a clearance joint between the connecting rod and slider. The numerical results point out that the existence of joint clearance causes high peaks on the kinematic and dynamic system's characteristics. Even if the clearance size is small, it also causes obvious high frequency shaking of the slider acceleration, joint reaction force and the crank moment.
引用
收藏
页码：4113 / 4120
页数：8
相关论文
共 50 条
  • [41] Dynamic analysis of mechanical systems with planar revolute joints with clearance
    Ma, Jia
    Qian, Linfang
    Chen, Guangsong
    Li, Miao
    [J]. MECHANISM AND MACHINE THEORY, 2015, 94 : 148 - 164
  • [42] Modeling and simulation of revolute clearance joint with friction using the NURBS-based isogeometric analysis
    Pi, Ting
    Zhang, Yunqing
    [J]. NONLINEAR DYNAMICS, 2019, 95 (01) : 195 - 215
  • [43] Multi-body Motion Modeling and Simulation for Tilt Rotor Aircraft
    Li Haixu
    Qu Xiangju
    Wang Weijun
    [J]. CHINESE JOURNAL OF AERONAUTICS, 2010, 23 (04) : 415 - 422
  • [44] Modeling and simulation of revolute clearance joint with friction using the NURBS-based isogeometric analysis
    Ting Pi
    Yunqing Zhang
    [J]. Nonlinear Dynamics, 2019, 95 : 195 - 215
  • [45] Engine Multi-Body with Flexible Crankshaft Modeling and Numerical Simulation
    LIU Yong-hong1
    [J]. International Journal of Mining Science and Technology, 2005, (04) : 361 - 365
  • [46] Analysis of planar multibody systems with revolute joint wear
    Mukras, Saad
    Kim, Nam H.
    Mauntler, Nathan A.
    Schmitz, Tony L.
    Sawyer, W. Gregory
    [J]. WEAR, 2010, 268 (5-6) : 643 - 652
  • [47] Study on dynamic responses of planar multibody systems with dry revolute clearance joint: Numerical and experimental approaches
    Wang, Xupeng
    Liu, Geng
    Ma, Shangjun
    Tong, Ruiting
    [J]. JOURNAL OF SOUND AND VIBRATION, 2019, 438 : 116 - 138
  • [48] Research on irregular wear mechanism of planar multi-body mechanical system with multi-clearance joints
    Wang, Zhimin
    Jin, Guoguang
    Wei, Zhan
    Liang, Dong
    Chang, Boyan
    Zhou, Yang
    [J]. ADVANCES IN MECHANICAL ENGINEERING, 2022, 14 (09)
  • [49] Modeling and simulation of a planar rigid multibody system with multiple revolute clearance joints based on variational inequality
    Song, Ningning
    Peng, Haijun
    Xu, Xiaoming
    Wang, Gang
    [J]. MECHANISM AND MACHINE THEORY, 2020, 154
  • [50] A continuous analysis method of planar rigid-body mechanical systems with two revolute clearance joints
    Haiyan Tan
    Yujin Hu
    Li Li
    [J]. Multibody System Dynamics, 2017, 40 : 347 - 373
12345